Jobmate
Jobmate 24-piece Rotary Tool Kit
#054-4777-0
$14.99
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Similar Items
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
Variable-speed: 10,000 - 35,000 RPM
Spindle-lock button
1/8 and 3/32" collet inserts
Replaceable motor brushes
Kit includes 24 pieces
Warranty
- This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | Currently Viewing | |||||
| Ratings | ||||||
| Maximum Speed (rpm) | 30000 r/min | 32000 r/min | 35000 r/min | 22000 r/min |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Review Highlights
Reviews
Filter Reviews
- price
- purchase
- small
- quality
- functional
- cutting
- sanding
- light
Rating
Locale
1 to 5 of 70 Reviews
1 – 5 of 70 Reviews
Most Recent
2 out of 5 stars.
Not very durable over time.
6 years ago
This is my third rotary tool and each failed miserably over a brief period of time. Most of my issues involve a stripped nosing that cannot release the bits. The shaft just keeps spinning and the lock button no longer grips the interior shaft. There have to be more durable units out there.
Helpful?
4 out of 5 stars.
Jobmate Rotary Tool
8 years ago
I have used this tool hundreds of times. Does a great job, price is very good.
Yes, I recommend this product.
Helpful?
2 out of 5 stars.
Doesn't last
12 years ago
I bought one of these and was thrilled at the low price. I'm an occasional home handyman and this thing was ideal for small jobs. Unfortunately, after about a dozen or so uses over a few years (after the warranty had expired!) the button which locks the shaft so you can change the drill bit or cutting wheel started to slip so it was no longer possible to unscrew the currently installed accessory. This happened right in the middle of a project, so now I have to go out and buy another rotary tool. I think I'll go for the high price option this time.
No, I do not recommend this product.
Helpful?
1 out of 5 stars.
Garbage
12 years ago
Spend the extra money and get one that will last. I used this for 2 hours and it broke.
No, I do not recommend this product.
Helpful?
1 out of 5 stars.
These Jobmate prods are of extremely poor quality
12 years ago
I bought both this "Jobmate rotary tool kit" and the "Rotary Tool Accessory Set" LAST year because of low price.
I only open and use them today. I wanted to drill the screw of my car's remote keyfob as the screw head is all messed up. It should not be a big job. I started by installing a drill from the accessory set and use the slowest speed to drill the screw. I did not put too much pressure as I did not want to break the drill.
What happens? The tip of the drill bit was broken the moment it touched the screw #even though I used the slowest speed for the rotary tool and lightest pressure#. And then I wanted to change the drill bit so I can do it all over again. But I couldn't as the spindle lock cannot be locked at all so I could not loosen the collet nut.
As I cannot find the receipt and it was likely that I bought them over 1 year ago, I have to throw the whole rotary tool away. Money wasted.
No, I do not recommend this product.
Helpful?
1 – 5 of 70 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 7 of 7 Questions
Most helpful answers
Q: Can Dremel parts fit on the jobmate? I imagine so but I want to make sure.
17 years ago7 Answers
A: I've used some Dremel parts (cutting blades) in this Jobmate tool without problems, but others won't fit tightly enough and just spin around in the collet. I don't know why because the diameter of the axle is identical for both JobMate and Dremel tools. I measured them with a micrometer to make sure.
13 years agoHelpful?
Q: is still in stores does canadian tire sell this online or in stores and if they sell it in stores is it still available
17 years ago4 Answers
A: I still see it at a couple of local Canadian Tires (Mississauga, Brampton), but it's disappeared at other CTs in the GTA.
13 years agoHelpful?
Q: Is this good for crafting small wooden objects? How it works on wood carving?
a year ago1 Answer
A: This product has been discontinued and is no longer available in Canadian Tire stores. You could try any of the Dremel rotary tools or the Mastercraft 20V Rotary Tool Station (054-8721) and use an attachment suitable for wood..
a year agoHelpful?
Q: Does this work with Dremel rotary attachments? Can this work with Dremel rotary attachments such as the 225-01 flex shaft attachment, the 220-01 WorkStation, or the 575 right angle attachment?
12 years ago1 Answer
A: Most of the Dremel Rotary Tool accessories are compatible with the Jobmate tool. However best way to is to bring your JM rotary tool to the store with you when u purchase the flexible-shaft and u can make sure it fits.
12 years agoHelpful?
Q: how do yu keep the round sanding papers from moving on the mandrel
13 years ago1 Answer
A: Located on the top of the screw mandril there is a flat head screw. Turning this screw clockwise or counter clockwise will expand or compress the plastic bad allowing you to properly secure the sanding bands to the screw mandril.
12 years agoHelpful?
Q: Can you cut a hole in a porcelin tile?For faucet
13 years ago1 Answer
A: This tool is not designed to cut porcelain but rather engraving into porcelain.
12 years agoHelpful?
Q: Ancien model? il y a 2-3ans jai acheter l'ancien model (noir), celui ou ont ne pouvais pas changer les brosses. qu'est t-il arriver? il ont tout simplement changer de model? qu'elle sont les differences?
13 years ago1 Answer
- Translate with Google
A: Le model a changé à partir de 2008 de Mastercraft au nom de Jobmate. Sur le nouveau model, les brosses peuvent être changées mais rien d’autre n’a changé.
13 years agoHelpful?
