NOTRE MAGASIN

Crédit Offert* EN SAVOIR PLUS

Soutien État de commande
EN
Jobmate

Outil rotatif Jobmate avec accessoires, 24 pces

#054-4777-0
Outil rotatif Jobmate avec accessoires, 24 pces
14,99 $

Malheureusement, cet article ne fait plus partie de l’assortiment du magasin que vous avez sélectionné et les magasins de la région.

Ces produits similaires présentés ci-dessous pourraient vous intéresser.

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

Jobmate
Jobmate

Outil rotatif Jobmate avec accessoires, 24 pces

14,99 $

Objets similaires

Produit Détails

  • Vitesse variable : 10 000 à 35 000 tr/min

  • Bouton de blocage de l'arbre

  • Mandrins de 1/8 et 3/32 po

  • Balais de moteur remplaçables

  • 24 pièces comprises

Garantie
  • Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.
Commande en ligne
  • Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
  • Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
  • La livraison le jour même coûte 9,99 $ par commande.
  • Informations sur une commande en ligne
Retours
  • La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
  • Certains articles ne sont pas remboursables ni échangeables.
  • La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.

Comparer des articles semblables

Only Show Differences
Ratings

Offres hebdo

Points saillants de l'evaluation

List of Avantages Highlights
List of Désavantages Highlights

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
21 commentaires avec 5 étoiles.
26 commentaires avec 4 étoiles.
8 commentaires avec 3 étoiles.
6 commentaires avec 2 étoiles.
9 commentaires avec 1 étoile.

Note générale

3.6
54 commentateurs sur 69 (78%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

    Filtrer les avis

    • prix
    • achat
    • petit
    • qualité
    • fonctionnel
    • coupe
    • ponçage
    • la satisfaction
    1 to 5 sur 70 commentaire
    1 – 5 sur 70 commentaire

    Not very durable over time.

    il y a 6 ans
    This is my third rotary tool and each failed miserably over a brief period of time. Most of my issues involve a stripped nosing that cannot release the bits. The shaft just keeps spinning and the lock button no longer grips the interior shaft. There have to be more durable units out there.
    Traduire avec Google
    Utile?

    Jobmate Rotary Tool

    il y a 8 ans
    I have used this tool hundreds of times. Does a great job, price is very good.
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?

    Doesn't last

    il y a 12 ans
    I bought one of these and was thrilled at the low price. I'm an occasional home handyman and this thing was ideal for small jobs. Unfortunately, after about a dozen or so uses over a few years (after the warranty had expired!) the button which locks the shaft so you can change the drill bit or cutting wheel started to slip so it was no longer possible to unscrew the currently installed accessory. This happened right in the middle of a project, so now I have to go out and buy another rotary tool. I think I'll go for the high price option this time.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?

    Garbage

    il y a 12 ans
    Spend the extra money and get one that will last. I used this for 2 hours and it broke.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?

    These Jobmate prods are of extremely poor quality

    il y a 12 ans
    I bought both this "Jobmate rotary tool kit" and the "Rotary Tool Accessory Set" LAST year because of low price. I only open and use them today. I wanted to drill the screw of my car's remote keyfob as the screw head is all messed up. It should not be a big job. I started by installing a drill from the accessory set and use the slowest speed to drill the screw. I did not put too much pressure as I did not want to break the drill. What happens? The tip of the drill bit was broken the moment it touched the screw #even though I used the slowest speed for the rotary tool and lightest pressure#. And then I wanted to change the drill bit so I can do it all over again. But I couldn't as the spindle lock cannot be locked at all so I could not loosen the collet nut. As I cannot find the receipt and it was likely that I bought them over 1 year ago, I have to throw the whole rotary tool away. Money wasted.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?
    1 – 5 sur 70 commentaire

    Questions

    1 - 7 sur 7 questions

    Q : Can Dremel parts fit on the jobmate? I imagine so but I want to make sure.

    il y a 17 ans
    Traduire avec Google
    7 Réponses
    • R : I've used some Dremel parts (cutting blades) in this Jobmate tool without problems, but others won't fit tightly enough and just spin around in the collet. I don't know why because the diameter of the axle is identical for both JobMate and Dremel tools. I measured them with a micrometer to make sure.

      il y a 13 ans
      Utile?
      Traduire avec Google

    Q : is still in stores does canadian tire sell this online or in stores and if they sell it in stores is it still available

    il y a 17 ans
    Traduire avec Google
    4 Réponses
    • R : I still see it at a couple of local Canadian Tires (Mississauga, Brampton), but it's disappeared at other CTs in the GTA.

      il y a 13 ans
      Utile?
      Traduire avec Google

    Q : Is this good for crafting small wooden objects? How it works on wood carving?

    il y a 11 mois
    Traduire avec Google
    1 Réponse
    • R : This product has been discontinued and is no longer available in Canadian Tire stores. You could try any of the Dremel rotary tools or the Mastercraft 20V Rotary Tool Station (054-8721) and use an attachment suitable for wood..

      il y a 11 mois
      Utile?
      Traduire avec Google

    Q : Does this work with Dremel rotary attachments? Can this work with Dremel rotary attachments such as the 225-01 flex shaft attachment, the 220-01 WorkStation, or the 575 right angle attachment?

    il y a 12 ans
    Traduire avec Google
    1 Réponse
    • R : Most of the Dremel Rotary Tool accessories are compatible with the Jobmate tool. However best way to is to bring your JM rotary tool to the store with you when u purchase the flexible-shaft and u can make sure it fits.

      il y a 12 ans
      Utile?
      Traduire avec Google

    Q : how do yu keep the round sanding papers from moving on the mandrel

    il y a 12 ans
    Traduire avec Google
    1 Réponse
    • R : Located on the top of the screw mandril there is a flat head screw. Turning this screw clockwise or counter clockwise will expand or compress the plastic bad allowing you to properly secure the sanding bands to the screw mandril.

      il y a 12 ans
      Utile?
      Traduire avec Google

    Q : Can you cut a hole in a porcelin tile?For faucet

    il y a 13 ans
    Traduire avec Google
    1 Réponse
    • R : This tool is not designed to cut porcelain but rather engraving into porcelain.

      il y a 12 ans
      Utile?
      Traduire avec Google

    Q : Ancien model? il y a 2-3ans jai acheter l'ancien model (noir), celui ou ont ne pouvais pas changer les brosses. qu'est t-il arriver? il ont tout simplement changer de model? qu'elle sont les differences?

    il y a 13 ans
    1 Réponse
    • R : Le model a changé à partir de 2008 de Mastercraft au nom de Jobmate. Sur le nouveau model, les brosses peuvent être changées mais rien d’autre n’a changé.

      il y a 13 ans
      Utile?
    Haut