Supercycle Rear-Mount Adjustable Steel Bike Kickstand For 20-28-in Bikes

Easy to install. It goes by the tire axis

Didn’t work for our bike. Receipt and packaging already thrown out unfortunately. Unable to return.

At first glance, this appears to be a decent product, but it's design will leave you flabbergasted! If you've actually gone ahead and purchased one of these, know that you'll have a frustrating time trying to install and configure it "wheels down." You're going to have to invert your bicycle somehow - at least to configure the length of the "pole" that will be holding your bike upright - because that's the only practical way. You're also going to need a stubby Phillips screwdriver. Due to the poor design of this stand, using a regular length screwdriver is going to add consternation to the frustration. The primary design flaw in this device is that the fastening of the telescoping part of the two-part pole is a single Phillips screw and that screw and the holes that receive it are inconveniently on the BACK of the pole, toward the bike's wheel! The screw is of very poor quality and was easily stripped during installation. And it will take some trial-and-error to determine if you've "telescoped" the pole to the appropriate length - a task that's impossible to determine unless the bike is wheels down. In other words, you might be screwing/unscrewing that set screw two or more times to get the pole to the optimal length and reorienting your bike wheels up/down multiple times.

Not safe - buje falls over

Easy to install, but check if it is compatable with your bike (it didn't work with my hubands) and it is too difficult to "kick" with your foot, I have to use my hand to move it up which isn't ideal. You don't know until you take the zip ties off the packaging, couldn't test it in store.