Epoxyshield
Rust-Oleum® EpoxyShield Garage Floor Coating Kit, Grey Gloss, 3.54-L/1-Gallon
#048-9726-8
$234.99
Buy Online :
- FREEAvailable
- Available
- Unavailable
Pick up at Leduc, AB
Get it Today !7 In Stock
Pick up available 04:30 p.m., Dec 19
Quantity updated to 1
Also Find It in Store:Aisle 47
Only 7 left
at Leduc, AB
Add to Registry
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
Rust-Oleum EpoxyShield Garage Floor Coating Kits beautify and protect your garage floor. EpoxyShield Coatings are specially formulated to provide superior adhesion and durability. Coatings are easy to apply and provide professional-looking results.
Suitable for use on interior concrete surfaces, such as garage floors
Patented burst-pouch technology for ease of use
Unique burst pouch allows for easy mixing and reduces waste in landfills
Apply when temperature is between 15 - 30 degrees Celsius
Covers up to 500 sq. ft. depending on surface porosity
Gloss finish provides a beautiful, show-room quality floor
Long lasting results, no hot tire pick up, resists chemicals and cracking
Roll-able formula allows for easy application
Low-VOC, low odor formula
Soap and water cleanup when wet
| Part Number | N233005 |
|---|---|
| Paint Type | Exterior Floor/Masonry Paint |
| Job Type(s) | Porch/Floor |
| Paint Finish | Gloss |
| Paint Can Size | 3.7 L (1 gallon) |
| Paint Premixed Colour | Grey |
| Advanced Features | Low-Odour |
| Paint Maximum Coverage Area (sq ft) | 248 ft² |
| Paint Maximum Coverage Area (sq m) | 23 m² |
| Paint VOC Level | Low VOC |
| Application Method | Roller |
|---|---|
| Paint Clean up | Soap&Water |
| Dry Time (min) | 1440 min |
| Recoat Time(hr) | 24 h |
| Shelf Life (year) | 5 yr |
| Minimum Operating Temperature (°C) | 15 °C |
Warranty
- This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | ||||||
| Ratings | ||||||
| Paint Type | Exterior Floor/Masonry Paint | Exterior Floor/Masonry Paint | Interior/Exterior Floor/Masonry Paint | Spray Paint/Specialty Brush Grade Paint | Interior/Exterior Floor/Masonry Paint | |
| Job Type(s) | Porch/Floor | Porch/Floor | Porch/Floor | Porch/Floor | Concrete | |
| Paint Finish | Gloss | Gloss | Gloss | Other | Satin |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Frequently Bought Together
+++
$369.96
Review Highlights
List of Pros Highlights
Pros
List of Cons Highlights
Cons
Suitable Cons could not be generated at this time.
Reviews
Customer Images and Videos
Filter Reviews
- parking
- application
- finish
- satisfaction
- for cold weather
- instructions
- cleaning
- ease of use
Rating
Locale
1 to 5 of 43 Reviews
1 – 5 of 43 Reviews
Most Recent
1 out of 5 stars.
Check the product inside before you buy
a year ago
Bought product to put on my garage floor. Opened the box and the material inside pouch B was hard. I didn't know the difference so proceeded to follow instructions and mixed the product in the pouch. Product did not mix well and came out in clumps. Even tried mixing in bucket with drill paint mix, no luck. Couldn't use it and a complete waste. Also wasted a paint roller and materials getting ready to do my floor. I'm sure the product is great, but this seemed to be a bad product\batch. If you buy open and check the pouch in the box, it should not be hard as a rock. I will be returning it but not sure if they will accept since it was opened but a complete waste of time money and effort on this go.
Helpful?
Response from Rust Oleum Team:
a year ago
Rust Oleum Team
Thank you for taking the time to share your experience with our EpoxyShield Garage Floor Coating Kit. We take customer feedback very seriously. There should be no lumps in the coating prior to your application. Please consider reaching out to us at 1-800-387-3625 to talk to us. We would be more than happy to assist you further. We would love to make things right if you give us another chance. -Rust-Oleum Product Support 1
5 out of 5 stars.
Easy to use on first try
a year ago
Great product easy to use on the first time
Helpful?
4 out of 5 stars.
Manque dinformation sur le plancher
2 years ago
3 out of 5 stars.
I think I had a bad batch, or it was old. I'm not sure what the shelf life is.
2 years ago
I went to mix the bags and noticed lumps in the small bag , I needed it for about 1/2 hr, though the lumps were gone ,couldn't feel anything . Mixed the 2 pouches together . when I rolled the floor, there was still small lumps .Now, it seems were the lumps where raised higher when you walk on them they bust and make dirty spots all over the floor
Helpful?
Response from Rust Oleum Team:
2 years ago
Rust Oleum Team
We apologize for the delay in getting back to you Darryl. We have been experiencing technical issues and were unable to respond to your review until now. We do appreciate you taking the time to reach out and share your experience with our EpoxyShield Garage Floor Coating Kit. There should not be any lumps in the coating prior to your application on the floor. Please consider reaching out to us at 1-800-387-3625 to talk to us so we can make things right. – Rust-Oleum Product Support 1
3 out of 5 stars.
I think I had a bad batch, or it was old. I'm not sure what the shelf life is.
2 years ago
I went to mix the bags and noticed lumps in the small bag , I needed it for about 1/2 hr, though the lumps were gone ,couldn't feel anything . Mixed the 2 pouches together . when I rolled the floor, there was still small lumps .Now, it seems were the lumps where raised higher when you walk on them they bust and make dirty spots all over the floor
Helpful?
Response from Rust Oleum Team:
2 years ago
Rust Oleum Team
We apologize for the delay in getting back to you Darryl. We have been experiencing technical issues and were unable to respond to your review until now. We do appreciate you taking the time to reach out and share your experience with our EpoxyShield Garage Floor Coating Kit. There should not be any lumps in the coating prior to your application on the floor. Please consider reaching out to us at 1-800-387-3625 to talk to us so we can make things right. – Rust-Oleum Product Support 1
1 – 5 of 43 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 29 Questions
Most helpful answers
Q: HI can this be used on a wooden garage floor.?
4 years ago3 Answers
A: Hi Poppie, Great question! Unfortunately, our Epoxy Shield coatings are not suitable for application to wood surfaces. Epoxy coatings cure very stiff and rigid and do not allow for any flexibility. A wood surface is going to expand and contract and will be quite flexible, and the epoxy will not be able to flex with the wood causing it will crack and chip off. We hope this new information is helpful.
4 years agoHelpful?
Q: Hi, I applied this product 8 years ago and had great results. There has been some wear due to parking my car. Can I clean reapply a second coat of the same product on top? Or is there a different product anyone can recommend?
4 years ago3 Answers
A: Hi Christopher, You can apply another coat of our Epoxyshield Garage Floor Coating kit overtop your older application. You have two options for prepping. A primer can be used first. Wire brush first to remove any loose or peeling paint. Sweep away any dust and clean entire floor with a cleaner and degreaser. Sand any bare concrete with 60-80 grit and rinse and thoroughly dry before priming. Allow the primer to dry for a minimum 6 hours, but no more than 48 hours to ensure proper adhesion to the top coat. If you choose no primer; Wire brush first to remove any loose or peeling paint. Sweep away any dust and clean entire floor with a cleaner and degreaser. Once dry, scuff sand whole surface with 60 grit sandpaper to abrade remaining paint. Rinse and thoroughly dry before top coating.
4 years agoHelpful?
Q: It says you don’t need to use an etching product with this...is that right?
4 years ago3 Answers
A: Hi Steen, Etching is required after cleaning the floor with a cleaner & degreaser. This will provide maximum adhesion to our Epoxyshield Garage Floor Coating kit.
4 years agoHelpful?
Q: I live in strata building I have a den I like to apply epoxy floor it’s ok or not for indoor
4 years ago2 Answers
A: Yes but the floor will be slippery when wet unless you mix the epoxy with the additive supplied..
4 years agoHelpful?
Q: What type of Paint roller is best fro application?
4 years ago2 Answers
A: I don’t think there is a “best” roller for application. I used a standard roller with a 48” shaft the same as I would use for coating the driveway. It worked great!
4 years agoHelpful?
Q: My Floor is very pitted in certain areas, should I use a self leveling concrete to get rid of the pitting before I apply the epoxy?
11 years ago2 Answers
A: Pitted concrete can be treated with a paintable concrete levelling compound. It is important that the material used be fully cured before the Epoxy Shield Garage Floor Coating is applied.
11 years agoHelpful?
Q: is it OK,safe fro cement basement floor?
12 years ago2 Answers
A: I would say yes; just make sure that there is adequate ventillation. Probably better for your basement floor since it will never see salt or a vehicle. I found this product to be quite odour-free.
12 years agoHelpful?
Q: Can this be installed in sections? Can I do half the garage then when everything is dried and set, move my stuff to the finished side and do the unfinished side?
12 years ago2 Answers
A: If you don't mind waiting a week, I would say OK. There really shouldn't be much weight on the floor for about a week to ensure that the paint doesn't lift off with the objects that you'll be putting on it.
12 years agoHelpful?
Q: Hello. How many squaree feet does this product cover? Does the floor have to be prepped prior to using it? Thanks.
17 years ago2 Answers
A: Covers 1 car garage.. and u have little left over... Not enough for 2 car garage !! I bought 2 and good thing I did. This made the garage look amazing.. Prep.. It includes a saline cleaner but that just gets rid of winter salt.. if ur floor has not been cleaned at all then I suggest a pressure washer with detergent.. thats what I did.
Anonymous16 years agoHelpful?
Q: Can it be applied near a wood stove and under it , 6” clearance from bottom of stove to concrete floor?
2 months ago1 Answer
A: Hi Teddy, As long as the surface temperature does not exceed 200F, the EpoxyShield is suitable for the concrete floor.
2 months agoHelpful?
1 - 10 of 29 Questions
