Mastercraft
Mastercraft Tap & Die Set, 75-pc
#058-7184-4
$149.99
Top RatedExclusive
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Similar Items
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
Mastercraft Tap and Die Set is heat treated and fully polished to reduce friction during use
Alloy steel construction for greater strength
Packaged in a plastic carrying case
Lifetime warranty
| Part Number | HR-CTCT31 |
|---|---|
| Accessories List | Case |
| Advanced Features | No Advanced Features |
| Assembled Height (cm) | 5.00 cm |
| Assembled Height (ft) | 0.16 ft |
| Assembled Height (in) | 1.97 in |
| Assembled Length (cm) | 34.00 cm |
| Assembled Length (ft) | 1.12 ft |
| Assembled Length (in) | 13.39 in |
| Assembled Weight (kg) | 0.00 kg |
| Assembled Weight (lb) | 0.00 lb |
|---|---|
| Assembled Width (cm) | 29.52 cm |
| Assembled Width (in) | 11.62 in |
| Assembled Width (mm) | 295.20 mm |
| Case Colour | Black |
| Case Material | Plastic |
| Measurement Standard | Metric, SAE |
| Number of Pieces | 75 |
| Outer Diameter (cm) | 0.00 cm |
| Outer Diameter (in) | 0.00 in |
| Outer Diameter (mm) | 0.00 mm |
| Package Depth (cm) | 34.00 cm |
| Package Depth (in) | 13.39 in |
| Package Height (cm) | 5.00 cm |
| Package Height (in) | 1.97 in |
| Package Weight (kg) | 2.73 kg |
| Package Weight (lb) | 6.02 lb |
| Package Width (cm) | 29.52 cm |
| Package Width (in) | 11.62 in |
| Primary Colour | Other |
| Primary Material | High-Carbon Steel |
| Product Use(s) | Low Carbon Steel |
| Shape | Round |
| Thread Pitch (in) | 0.00 in |
| Thread Pitch (mm) | 0.00 mm |
| Thread Type | Metric&UNC&UNF |
| Threads Per CM | 0 |
Warranty
- This product carries a lifetime exchange warranty redeemable at any Canadian Tire store.
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | Currently Viewing | |||||
| Ratings | ||||||
| Accessories List | Case | No Accessories Included | No Accessories Included | Case | No Accessories Included | |
| Advanced Features | No Advanced Features | No Advanced Features | No Advanced Features | No Advanced Features | One Step Deburr and Countersink | |
| Assembled Height (cm) | 5.00 cm | 2.50 cm | 2.50 cm | 3.70 cm | 6.50 cm |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Review Highlights
List of Pros Highlights
Pros
List of Cons Highlights
Cons
Suitable Cons could not be generated at this time.
Reviews
Filter Reviews
- purchase
- price
- functional
- value
- quality
- satisfaction
- size
- professionalism
Rating
Locale
1 to 5 of 26 Reviews
1 – 5 of 26 Reviews
Most Recent
2 out of 5 stars.
Fair quality
6 years ago
I've own this set for 12 years, the quality is fair which means they perform well if used on Aluminum and occasionally( if used careully/slowly) to tap mild steel but the whole set is the same price as one single good quality tap .
Overall, if you are a hobby machinist or need to get the job done well, buy a better set.
No, I do not recommend this product.
Helpful?
5 out of 5 stars.
Great warranty
7 years ago
Not a tool you'll need everyday unless you're a machinist, but when you need it it's golden. These taps have a tendency to crack if you push them too hard (they are all like it) so having Mastercraft's no hassle warranty behind you is a excellent choice no matter what level you use this set on. Would buy it again in a heart beat, but I'll never have too ;)
Helpful?
4 out of 5 stars.
Good kit 20 years ago.
8 years ago
Had this (or similar) for 25 + years used in a professional repair environment & the set did very well. CTC would warranty broken goods with no questions (I would get some apprehension to replace from more expensive door to door tool companies). My only peeve is the mold that the kit is housed in. Not very strong and WILL dissolve if oil or cleaner is introduced. Over all a good kit especially if on sale & used as a hobby tool set but if still manufactured as it was when I purchased many moons ago, strong enough to use on a day to day basis.
Yes, I recommend this product.
Helpful?
5 out of 5 stars.
great tap set
9 years ago
bought on sale years ago and it is a great set. not used daily, but is always there when i need it.
Yes, I recommend this product.
Helpful?
5 out of 5 stars.
great tool
11 years ago
Used it a few weeks ago on some stripped bolts works great
Yes, I recommend this product.
Helpful?
1 – 5 of 26 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 17 Questions
Most helpful answers
Q: I have this set and the taps constantly slip in the chuck. I cannot seem to get it tight enough to cut a thread. Is there a trick to this?
6 years ago1 Answer
A: The smaller cutters need to be positioned and tightened with a bit more care, to prevent slippage.
6 years agoHelpful?
Q: What are the diameters of the taps and dies?
6 years ago1 Answer
A: 76PC's configuration: 1PC adjustable die stock 1PC die stock 1PC adjustable tap wrench 1PC two in one tap wrench 1PC T-handle tap wrench 1PC screwdriver 2PC SAE&METRIC thread gauges. 34PC tap and die each: 3x0.5,4x0.7,4x0.75,5x0.8,5x0.9,6x1.0,7x1.0,8x1.0,8x1.25,9x1.0,9x1.25,10x1.25,10x1.5,11x1.5,12x1.5,12x1.75, 4-40NC,6-32NC,8-32NC,10-24NC,10-32NF,12-24NC,1/4''-20NC,1/4''-28NF,5/16''-18NC,5/16''-24NF,3/8''-16NC, 3/8''-24NF,7/16''-14NC,7/16''20NF,1/2''-13NC,1/2''-20NF,1/8''-28BSP 1PC blow moulded case
6 years agoHelpful?
Q: Does the warranty include the plastic case too?
8 years ago1 Answer
A: The plastic case carries a one year exchange warranty.
8 years agoHelpful?
Q: can you tell me what sizes and thread type they are , thanks
8 years ago1 Answer
A: 76PC's configuration: 1PC adjustable die stock 1PC die stock 1PC adjustable tap wrench 1PC two in one tap wrench 1PC T-handle tap wrench 1PC screwdriver 2PC SAE&METRIC thread gauges. 34PC tap and die each: 3x0.5,4x0.7,4x0.75,5x0.8,5x0.9,6x1.0,7x1.0,8x1.0,8x1.25,9x1.0,9x1.25,10x1.25,10x1.5,11x1.5,12x1.5,12x1.75, 4-40NC,6-32NC,8-32NC,10-24NC,10-32NF,12-24NC,1/4''-20NC,1/4''-28NF,5/16''-18NC,5/16''-24NF,3/8''-16NC, 3/8''-24NF,7/16''-14NC,7/16''20NF,1/2''-13NC,1/2''-20NF,1/8''-28BSP 1PC blow moulded case
8 years agoHelpful?
Q: How does Maximum lifetime warranty compare with Mastercraft lifetime warranty ? There has been 46 pc. Maximum tap and die set on sale for same price as 72 pc Mastercraft set. Not sure of best way to go regarding quality.
11 years ago1 Answer
A: If you are referring to 58-7200 (Mastercraft Maximum Tap and die Set, 46Pc), it carries the same lifetime exchange warranty, against manufacturing defects, as 58-7184.
11 years agoHelpful?
Q: Please identify the specific sizes included in the set. - Previous answers to this question are inadequate because they do not identify the SPECIFIC sizes included in the set. This information should be listed in the product's item description.
11 years ago1 Answer
A: 76PC's configuration: 1PC adjustable die stock 1PC die stock 1PC adjustable tap wrench 1PC two in one tap wrench 1PC T-handle tap wrench 1PC screwdriver 2PC SAE&METRIC thread gauges. 34PC tap and die each: 3x0.5,4x0.7,4x0.75,5x0.8,5x0.9,6x1.0,7x1.0,8x1.0,8x1.25,9x1.0,9x1.25,10x1.25,10x1.5,11x1.5,12x1.5,12x1.75, 4-40NC,6-32NC,8-32NC,10-24NC,10-32NF,12-24NC,1/4''-20NC,1/4''-28NF,5/16''-18NC,5/16''-24NF,3/8''-16NC, 3/8''-24NF,7/16''-14NC,7/16''20NF,1/2''-13NC,1/2''-20NF,1/8''-28BSP 1PC blow moulded case
11 years agoHelpful?
Q: is there 1-pc SAE screw pitch gauge in this set
12 years ago1 Answer
A: There are two pcs screw pitch gauge in this set of 76pc, one is metric and another is SAE.
12 years agoHelpful?
Q: Pour du métrique, anglais ou les 2?
12 years ago1 Answer
- Translate with Google
A: Métrique et standard
12 years agoHelpful?
Q: will this set work on stainless steel
13 years ago1 Answer
A: No it will not.
12 years agoHelpful?
Q: Please list the included sizes C.T. could include List of sizes in the "Features", or just readable picture of the packaging. The packaging usually has it printed.
13 years ago1 Answer
A: The metric sizes are 3mm to 12mm. Most are coarse thread only, but some fine thread are included. SAE sizes are #4 to #12 and 1/4" to 1/2" in both coarse and fine thread. There are no bottoming taps, just the through hole type. There is also a 1/8"-27 Pipe Thread tap and die.
13 years agoHelpful?
1 - 10 of 17 Questions
