JBL Stadium Midrange Speakers, 2-1/2-in
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Quebec residents: For information on maintenance and repair click here.
Product Details
The JBL Stadium Midrange Speakers deliver superior sound quality in your vehicle. Featuring JBL's patented Plus One™ Glass Fiber Woofers with Rubber Surrounds, these speakers ensure high SPL performance and precision. Their oversized (35mm) woofer voice coils dissipate heat for enhanced reliability, complemented by edge-driven soft dome tweeters for smooth high-frequency response. These speakers offer 3-way upgradability for ideal tonal balance and boast a high-output 2 Ohm design for effortless peak power delivery. Undergoing Harman Standard Reliability Testing and competitive tuning, these speakers offer flexibility and accuracy for superior JBL sound enjoyment.
Bring legendary JBL sound to your vehicle with the JBL 2-1/2" Stadium Midrange Speakers
JBL Patented Plus One™ Glass Fiber Woofers with Rubber Surrounds for more accurate sound with high SPL performance
Oversized (35mm) Woofer Voice Coils to dissipate the heat for improved reliability, maximum power handling with low distortion
Edge-driven Soft Dome Tweeters to smooth high frequency response
3-way Upgradability to accommodate midrange upgrade for perfect tonal balance
High Output 2 Ohm Design to deliver peak power with ease
Harman Standard Reliability Testing
Competitively Tuned for added flexibility and accuracy
| Part Number | STADIUGTO20M |
|---|---|
| Speaker Type | Automotive Speakers |
| Smart System Compatibility | No Smart Technology |
| Battery Life (hr) | 0 h |
| Colour | Black |
| Assembled Height (in) | 2.56 in |
| Assembled Width (in) | 5.31 in |
| Assembled Length (in) | 13.46 in |
| Assembled Weight (lb) | 1.63 lb |
| Power Source | Not Applicable |
| Batteries Required Quantity | 0 |
|---|---|
| Accessories List | Remote Control |
| Advanced Features | No Advanced Features |
| Number of Pieces | 4 |
| Decibel Rating (dB) | 90.00 dB |
| Minimum Frequency Range (MHz) | 0.00 MHz |
| Maximum Frequency Range (MHz) | 0.01 MHz |
| Output Power (Watts) | 65 W |
This product carries a manufacturer warranty. Please visit or contact your local Canadian Tire store for details. This product carries a manufacturer warranty. Please visit or contact your local Canadian Tire store for details.
View user manuals and additional product information
Pick Up is free at most stores (some stores require a minimum order value before tax)
Shipping fee is based on size and weight of products and distance from address to store
Same-Day Delivery costs $9.99 per order
Same-Day Delivery and Ship to Home are unavailable for tires and wheels
Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
Some products are non-refundable and non-exchangeable
Special order hard parts and specific application automotive parts must be returned to original store of purchase
The return info outlined above may not apply to the product you are currently viewing. For complete details and exceptions, please refer to our Return Policy.
Compare Similar Products
Only Show Differences | Currently Viewing | |||||
| Ratings | ||||||
| Speaker Type | Automotive Speakers | |||||
| Smart System Compatibility | No Smart Technology | |||||
| Battery Life (hr) | 0 h |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Review Highlights
Reviews
Questions
Q: I use a JBL A9004 amplifier, 2 ports are bridged for the JBL CSX1400 subwoofer. On the other 2 ports I want to instal in serie the JBL GX642 and the JBL Stadium GTO M20 in serie. The speakers are 2,3 and 2,5 ohm, is this possible in serie together?
4 years ago
A: The minimum speaker impedance for bridged operation with our JBL A9004 is 4 ohms. We'd like to work with you directly about how you're planning your setup so we can better provide you steps and recommendations. Please reach out to us here: https://support.jbl.com/us/en/
4 years ago
Q: Can JBL please provide info on the plastic two pin adapter that is connected to the end of the crossover wire? I need a couple of those connections to integrate into my system.
4 years agoA: We would like to get more information to help you out. Please contact us so we can assist you: https://support.jbl.com/us/en/
4 years ago
Q: I plan on running these active, but I noticed these are rated at 2.5 ohms but my amp is rated for 100w RMS per channel at 4 Ohms only. Will I need an amp that is 2 ohm stable or can I run these on my existing amp?
6 years agoA: JBL Stadium GTO 20M can be used with an amplifier that has a rating of 65-195 watts rated at 3 ohms. If you have more questions, please reach out to our Customer Support. https://www.jbl.com/support-contact.html
6 years ago
Q: I purchased the 960c these and the club 5 ch amp absolutely love the system but the 20m I’m using on the drivers side distorts not all the time but just certain voices or guitar sounds can this be fixed? I switched it w/the pass side with same results.
6 years agoA: We'd like to work with you directly about the audio issues you're having with your JBL Stadium GTO 20M. Please reach out to our Customer Support, and our representatives will reply within 24-48 hours. https://www.jbl.com/support-contact.html
6 years ago
Q: Which 6.5 component setups will this work with?
6 years agoA: You can use our JBL Stadium GTO 20M to upgrade our JBL Stadium GTO 600C and JBL Stadium 960C into a 3-way system. If you have more questions, please contact us here. https://bit.ly/2zwFkYM
6 years ago
Q: Can I use this with the JBL GTO609C system?
6 years agoA: Thanks for your question. Our JBL Stadium GTO 20M is meant for use with Stadium GTO component two-way systems only because these feature the gap-switch on the crossover network which our Stadium GTO crossovers have. Our JBL GTO 609C is an older model and can't be upgraded to a three-way system. If you have more questions, please contact us so we can help you.
6 years ago
Q: "Basically, you will be connecting the GTO20M to the crossover and from the crossover, it will get connected to the amplifier." My question is when i cut the adopter off the wire so I can connect to my amp which side is positive?
7 years agoA: I'd say the left side.. but it would depend on where your looking from. There are labels on the speaker terminals to tell you if it's positive or negative, same with the crossover. It's best to check those just to be sure.
7 years ago
Q: Can i add this speaker to an existing speaker system, where all the other speakers are 4 ohm? i would like to run this speaker with a 4 ohm tweeter using a passive crossover.
7 years agoA: We would like to work with you directly to help with your inquiry. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
7 years ago
Q: can you use the GTO 20M without the crossover.... my amp doesn't appear to have an output to fit the plug
7 years agoA: Hi! We highly recommend using the crossover if you will be using the GTO 20M. Basically, you will be connecting the GTO20M to the crossover and from the crossover, it will get connected to the amplifier.
7 years ago
Q: 1. Do these midranges play any vocals? 2. If I hook these up in parallel to the 690C components, will the impedance be lowered to 1.25 ohm?
7 years agoA: We would like to work with you directly to help you with your inquiry. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
7 years ago
