JBL
JBL GX-A3001 Subwoofer Amplifier
#035-0261-6
$239.99
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.
Quebec residents: For information on maintenance and repair click here.
Product Details
- Features
- Specifications
- Resources
JBL GX-A3001 Subwoofer Amplifier is a 415 Watt mono subwoofer amplifier
Features a cast-aluminum heat sink, built-in electronic crossover networks and bass boost circuits
On-board variable electronic crossover makes this a versatile system building tool for the audiophile
Easy to install, yet can serve as the foundation of a truly sophisticated sound system
4-Ohm Power Output: 200W rms x 1, less than 1% THD+N
2-Ohm Power Output: 300W rms x 1, less than 1% THD+N
Total Peak Power Output: 415W
Signal-to-Noise Ratio: 98dB (ref rated output @ 4 ohms)
Frequency Response: 10Hz–320Hz
THD+N: less than 1%
Input Sensitivity: 100mV–20V
Variable Bass Boost: 0 to +12dB @ 45Hz
Dimensions: 291 L x 206 W x 52mm H (11-7/16 x 8-1/8 x 2-1/16")
| Part Number | GX-A3001 |
|---|---|
| Package Depth (cm) | 24.89 cm |
| Package Depth (in) | 9.80 in |
| Package Height (cm) | 10.80 cm |
| Package Height (in) | 4.25 in |
| Package Weight (kg) | 3.00 kg |
| Package Weight (lb) | 6.61 lb |
| Package Width (cm) | 33.53 cm |
| Package Width (in) | 13.20 in |
Warranty
This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Compare Similar Products
Only Show Differences | Currently Viewing | |||||
| Ratings | ||||||
| Package Depth (cm) | 24.89 cm | |||||
| Package Depth (in) | 9.80 in | |||||
| Package Height (cm) | 10.80 cm |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Review Highlights
Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 25 Questions
Most helpful answers
Q: Can this amp move a sub 250 rms 4ohms??
7 years ago
Originally posted on jbl.com
2 Answers
A: The sub is a ROCKFORD P1S4 250 RMS
7 years ago
Q: Since this amp has been discontinued, what would be the best replacement for it, or the best replace the for the 2,10” Pioneer Champion Series Sub Woofers I need the amp for.? (Sub Specs ~ 1200W, 350W Nominal Copper Voice Coil 4 ohms x 2. Thank you
5 years agoOriginally posted on jbl.com
1 Answer
A: It would be best to check on Pioneer's Amplifiers for the best sound match signature for your subwoofer.
5 years ago
Q: Hi, I have gx-602, gx-604 running 6 gto-629's and a gx-a3001 running a S2-1224SS and i'm not sure how to set up the input levels could JBL advise me?
6 years agoOriginally posted on jbl.com
1 Answer
A: Thank you for your question. We would like to work with you to further support you, you may contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance. Please see https://uk.jbl.com/support-product.html for further details. Thank you.
6 years ago
Q: Hi is good for full range speakers Regards
7 years agoOriginally posted on jbl.com
1 Answer
A: Hi! Yes you could use the GXA3001 amp for your full range speakers. However, it will depend on the full range speakers that you will be using. For example, if you have a pair of 6" or smaller full-range speakers, you must set the Crossover Filter switch in the “HP” (high-pass) position. This will limit the amount of low-frequency energy sent to the speakers, significantly reducing distortion and preventing the speakers from damage. On the other hand, for larger full-range speakers (6" x 9" or larger) that can handle significant bass and you are not using a subwoofer in the system, set the Crossover Filter switch to the "FLAT' (full-range) position.
7 years ago
Q: Hi, this amp is recommended for sub 250 rms 4 ohms and how is the connection???
7 years agoOriginally posted on jbl.com
1 Answer
A: To do the setup for the GX-A3001 Input, use a "Y"-adapter to connect your source unit or processor's subwoofer line output to the amplifier's left and right inputs. If your source unit does not have a dedicated subwoofer output you can connect the rear left/right outputs to the amplifier's left and right inputs.
7 years ago
Q: Is this compatible with JBL GT5-12D subwoofer?
7 years agoOriginally posted on jbl.com
1 Answer
A: Yes it is, The GX-A3001 drives 200W at 4 ohms while the GT5-12D can handle 275W at 4 ohms.
7 years ago
Q: Hi, I have a GX-A3001 running a Rockford fosgate punch P1 12" and thinking of upgrading to the Punch 12" P2 4-Ohm DVC Subwoofer The Rockford Fosgate P2 12” subwoofer The P2D4-12 features a Dual 4-Ohm voice coil so not sure if it will work?
8 years agoOriginally posted on jbl.com
1 Answer
A: Hi. The 3001 is specified to deliver 415 Watts into 2 Ohms, under specified circumstances. This means that you can connect the two 4 Ohm voice coils in your subwoofer drive unit in parallel, to give you a total impedance of 2 Ohms. Of course, no load is ever totally linear and ideal, so your sub may dip under 2 Ohms, and rise above 2 Ohms. Since 2 Ohms is the minimum that the 3001 can handle, it is on the edge of its capacity, so if your sub dips under 2 Ohms, or if you have low DC input voltage, or play at maximum levels over long periods of time, or have insufficient cooling, you may still experience problems, like protection circuits cutting in or thermo protection shutting audio off.
8 years ago
Q: I just hooked up the GX-A3001 to my JBL 10" 1000D 260Watt and smell a burning plastic smell. I only have the amp turned up half way. Should I turn off the bass boost? It is also running hot, I double checked my connections, they are good thoughts?
8 years agoOriginally posted on jbl.com
1 Answer
A: Sorry to hear of this problem you are having. Please submit a case at www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
8 years ago
Q: Is this amp cea 2006 compliant?
8 years agoOriginally posted on jbl.com
1 Answer
A: Absolutely. All of our products are CEA 2006 compliant.
8 years ago
Q: If I have only one 2 ohms load do I have to use only one pair of terminals (+)(-) -->(+)(-)<-- or do I have to connect it like if it is in bridged I mean like this -->(+) (-)(+) (-)<--
8 years agoOriginally posted on jbl.com
1 Answer
A: The GX-A3001 has two parallel sets of speaker connectors, allowing you to connect two subwoofers. If you are using a single subwoofer you can connect it to either set of GX-A3001 speaker connectors. If you are using two 2-ohm subwoofers you can connect them to one of the sets of connectors in series to be above the required 2-ohm minimum impedance.
8 years ago
1 - 10 of 25 Questions
