Mastercraft
Mastercraft 3 Amp Metal Lathe & Chisel Set, 12-in
#055-4504-8
$249.99
Exclusive
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Quebec residents: For information on maintenance and repair click here.
Product Details
Mastercraft Lathe & Chisel Set features 3A variable speed motor with 500-3500 RPM
Speed control knob for variety of applications
Headstock and tailstock #1 morse taper
8" swing over bed for large turning capacity
1-1/2" tailstock spindle travel
Includes 3 piece chisel set and push out rod
| Part Number | MCS330 |
|---|---|
| Accessories List | Hard Case |
| Advanced Features | Adjustable Speed |
| Assembled Height (cm) | 32.00 cm |
| Assembled Height (ft) | 1.05 ft |
| Assembled Height (in) | 12.60 in |
| Assembled Length (cm) | 76.00 cm |
| Assembled Length (ft) | 2.49 ft |
| Assembled Length (in) | 29.92 in |
| Assembled Weight (kg) | 19.00 kg |
| Assembled Weight (lb) | 41.89 lb |
|---|---|
| Assembled Width (cm) | 34.50 cm |
| Assembled Width (in) | 13.58 in |
| Assembled Width (mm) | 345.00 mm |
| Batteries Required Quantity | 0 |
| Bench-Top/Stationary | Bench-Top |
| Certifications | CUS |
| Chuck Size (cm) | 0.00 cm |
| Chuck Size (in) | 0.00 in |
| Chuck Size (mm) | 0.00 mm |
| Cord Gauge (ga) | 18ga |
| Cord Type | Corded |
| Maximum Speed (rpm) | 3500 r/min |
| Maximum Turning Diameter (cm) | 25.00 cm |
| Maximum Turning Diameter (in) | 9.84 in |
| Minimum Speed (rpm) | 500 r/min |
| Motor Speed (rpm) | 2500 r/min |
| Motor Type | Brushed |
| Number of Accessories | 3 |
| Number of Pieces | 1 |
| Package Depth (cm) | 71.00 cm |
| Package Depth (in) | 27.95 in |
| Package Height (cm) | 19.50 cm |
| Package Height (in) | 7.68 in |
| Package Weight (kg) | 19.00 kg |
| Package Weight (lb) | 41.89 lb |
| Package Width (cm) | 39.50 cm |
| Package Width (in) | 15.55 in |
| Primary Colour | Black |
| Primary Material | Metal |
| Product Model Number | MCS330 |
Warranty
- For customer support, call Mastercraft Hotline at 1-800-689-9928
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | Currently Viewing | ||||
| Ratings | |||||
| Advanced Features | Variable Speed | No Advanced Features | No Advanced Features | No Advanced Features |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Review Highlights
List of Pros Highlights
Pros
List of Cons Highlights
Cons
Reviews
Customer Images and Videos
Filter Reviews
- purchase
- turning
- price
- small
- wood
- quality
- for beginners
- satisfaction
Rating
Locale
1 to 5 of 83 Reviews
1 – 5 of 83 Reviews
Most Recent
4 out of 5 stars.
Lathe
3 years ago
I liked this tool but unfortunately I broke the tool rest, when I tried to replace it I learned that the unit was being discontinued. I wasn’t happy to hear this, my only option was to return the machine.
Yes, I recommend this product.
Helpful?
4 out of 5 stars.
mandrin
3 years ago
a quel endroit je pourrais me trouver un mandrin?
je suis de les coteaux.
Translate with GoogleYes, I recommend this product.
Helpful?
1 out of 5 stars.
Absolute hot garbage
3 years ago
There wasn’t a single thing that worked on this piece of trash. The FIRST one I bought… oh boy… here is a list of issues right out of the box.
- The motor had less horse power than a dead horse
- The guide was bumpier than my backside
- The tail stock wouldn’t lock in place, it would fail every time with almost no effort
- The free chisels are just free trash
I ended replacing the first one on warranty. The only difference in issues was that it took one project to burn out the motor.
The only good part about all of this was the Mastercraft customer service person I dealt with. She helped me get my money back.
No, I do not recommend this product.
Helpful?
1 out of 5 stars.
What warranty?
3 years ago
During the first 3 months the pulley failed because of a missing screw. The manufacturer, Mastercraft, informed me that the screw was not available so I would have to source it myself as well as repair it myself. Why have a warranty if the customer must repair a defective product?
No, I do not recommend this product.
Helpful?
2 out of 5 stars.
Mini lathe
3 years ago
Turned 10 pens at most and now the headstock is out of alignment. Doesn’t seem to be a way to realign it. Spend the money on a quality lathe instead
Helpful?
1 – 5 of 83 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 38 Questions
Most helpful answers
Q: bonjours, j'aimerais produire des sphère en bois d'un diametre de 5 pouce , serait il possible avec ce modèle ?
3 years ago3 Answers
- Translate with Google
A: Sans problème, mais avec d'autres ciseaux à bois que ceux fournis. Le tour est de très bonne qualité.
3 years agoHelpful?
Q: would this work for aluminum? i know its a soft(er) metal and i need to try and remove turnings from a piece of aluminum (cylindrical in shape already). thanks!
4 years ago2 Answers
A: It doesn’t even work with wood. I would not waste your time trying. I bought one of these and didn’t work out of the box. Also doesn’t include a chuck that would hold aluminum.
4 years agoHelpful?
Q: How can I get replacement parts for this? The motor is burned out.
4 years ago2 Answers
A: Check with the store but if it’s out of warranty best to just just replace it because you’ll be needing new bearings too eventually too at which point it would have been cheaper to just grab one of these on sale. :)
4 years agoHelpful?
Q: What is the HP on this machine?
4 years ago2 Answers
A: 1/3 HP
4 years agoHelpful?
Q: What is the biggest size of wood can the lathe hold to turn a bowl? / How big can you make the bowl? In inch?
6 years ago2 Answers
A: The largest starting diameter is 9.82 inches
4 years agoHelpful?
Q: J'aimerais savoir le filage pour adaptateur J'ai un mini-tour mastercraft 55-4501-4. Je veux acheter un adaptateur de mandrin. J'ai besoin de savoir la grosseur et sorte de filet. ex: 3/4" 16 ftpi
11 years ago2 Answers
- Translate with Google
A: 1"/ 8filets au pouce
9 years agoHelpful?
Q: What is the horse power of this motor?
11 years ago2 Answers
A: 1/3 hp
4 years agoHelpful?
Q: what is the thread size for this lathe
13 years ago2 Answers
A: 1x8
13 years agoHelpful?
Q: Lathe Handles I have had this lathe about a year. Almost all the handles are broken. Where can I get new (better) ones?
13 years ago2 Answers
A: busy bee tools
13 years agoHelpful?
Q: Hi, I am a new to wood turning and was wondering if this product is suitable for making a rosary?
13 years ago2 Answers
A: Buy beads already made less pain.
13 years agoHelpful?
1 - 10 of 38 Questions
