MAXIMUM
MAXIMUM 2 Amp Dual-Bevel Scroll Saw, 18-in
#055-6706-6
$429.99
Exclusive
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Similar Items
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
MAXIMUM Scroll Saw offers a 2 Amp motor with 400-1,600 RPM
Variable speed to cut wood with different hardness
Dual bevel table tilting for angle cuts: left 45°, right 45°
Cast Iron base for tool stability
transparent guard for safety and convenience
Features LED work light that illuminates work surface for greater visability
Eqipped with dust blower to maintain clean cutting area
Built in dust port for for easier collection of dust
Carry handle with soft grip for easy transport
Travel: 0.75"
Net Weight: 46 lbs (21.5 kg)
| Part Number | MQW50III |
|---|---|
| Amperage | 2 A |
| Blade Length (cm) | 12.70 cm |
| Blade Length (in) | 5 in |
| Case Type | Not Included |
| Cord Gauge (ga) | 16ga |
| Cord Length (ft) | 8.2 ft |
| Cord Length (m) | 2.50 m |
| Cord Type | All Weather |
| Dust Collection Output Diameter (cm) | 45.00 cm |
| Dust Collection Output Diameter (in) | 17 3/4 in |
|---|---|
| Dust Collection Output Diameter (mm) | 450.00 mm |
| Dust Collection Type | Dust Bag |
| Motor Type | Brushed |
| Number of Accessories | 2 |
| Package Depth (cm) | 78.50 cm |
| Package Depth (in) | 30.91 in |
| Package Height (cm) | 46.50 cm |
| Package Height (in) | 18.31 in |
| Package Weight (kg) | 19.00 kg |
| Package Weight (lb) | 41.89 lb |
| Package Width (cm) | 44.50 cm |
| Package Width (in) | 17.52 in |
| Product Model Number | MQW50III |
Warranty
- 5 year limited warranty against defects in workmanship and material.. For customer support, call 1-888-670-6682. 1 yr repair
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | Currently Viewing | ||||
| Ratings | |||||
| Amperage | 2 A | ||||
| Blade Length (cm) | 12.70 cm | ||||
| Blade Length (in) | 5 in |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Review Highlights
List of Pros Highlights
Pros
List of Cons Highlights
Cons
Reviews
Customer Images and Videos
Filter Reviews
- sawing
- blade
- purchase
- quality
- price
- cutting
- satisfaction
- light
Rating
Locale
1 to 5 of 49 Reviews
1 – 5 of 49 Reviews
Most Recent
4 out of 5 stars.
Be careful
2 years ago
So far so good I have had issues with other products master chef's BBQ not worth the money I spent and a mastercraft band saw not worth the time won't cut a straight cut onky good for thin materials
Helpful?
2 out of 5 stars.
maximum scrollsaw
2 years ago
my saw has about 15 hours on it, and I don't recommend this saw. I do alot of fine work, fretwork etc, and changing blades is a nightmare, the set screws are tiny, and if you ever dropped one, it would be tough to find. also, the motor started surging, I should have spent the extra money on a better saw.
No, I do not recommend this product.
Helpful?
4 out of 5 stars.
Seems good
2 years ago
Have only used it on one project so far and it seems to do a good job once you put in the right blade with the right tension on it. The blade slipped out a few times until I realized you could spin the tension knob clockwise to increase the tension prior to pushing it down.
Yes, I recommend this product.
Helpful?
5 out of 5 stars.
Bruyante !
3 years ago
1 out of 5 stars.
Bought on clearance, my mistake,
3 years ago
Poor obsolete design, vibrates, blade clamps very tricky to use, flimsy plastic insert around blade , blower will not stay in position. Bought on sale, it has been replaced by newer design. Good news was that return process was first class.
Helpful?
1 – 5 of 49 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 22 Questions
Most helpful answers
Q: I can replace the pinned blabes but there are no instructions re pinless and I can see no way to secure the pinless. The manual says you can use both. Maximum Scroll saw # 055-6706-6
11 years ago5 Answers
A: Called technical support/customer service. They sent the required set screws right away. First time using , they stripped. Received other screws only to fine that when you use pin less blades you have to tighten to the point that the blades bend and brake very easily. Very poor system. I can only use pinned blades which is very disappointing. I prefer pin less because of the cut efficiency and quality.
9 years agoHelpful?
Q: For the How are the pinless blades scured? Allen wrnch or a knob tightener?MMaximum scroll saw...
11 years ago3 Answers
A: I purchased one of these just a few weeks ago. Page 24 has nothing about securing blades - that information is on page 22, and it says nothing about pinless blades. The only instructions are for pin end blades.
9 years agoHelpful?
Q: Bonjour j'ai besoin d'une pièce pour une scroll saw modèle 55-6703 série w115051 pièce jointive # 80 pièce en plastique qui s'est brisée
2 years ago2 Answers
- Translate with Google
A: Malheureusement, nous ne disposons plus de cette pièce pour ce produit discontinué.
2 years agoHelpful?
Q: does the maximum 18in scroll saw have a quick change blade clamp
3 years ago2 Answers
A: Depends on style of blade used. Pinless have a screw each end. Pinned have slots to fit blade into.
3 years agoHelpful?
Q: Does it take pinless blades
4 years ago2 Answers
A: No, blades require pins to secure them to the head.
4 years agoHelpful?
Q: Maximum scroll saw What is the type of blade attachment? Is it strictly pin?
11 years ago2 Answers
A: as per the options given, pin and pin less.
11 years agoHelpful?
Q: The dust port cannot be 45 cm's, is there an accurate measurement?
8 months ago1 Answer
A: This is most likely a mistake. It was probably meant to show 4.5 cm. That said, this model is discontinued. Please have a look at the newer model, #055-6796.
8 months agoHelpful?
Q: Can I order the 055-6796-0 scroll saw and if so, how long for it to arrive approximately? The second thing is a pair of Stanley Zeiss shoes. oh wait, they are out of stock also
3 years ago1 Answer
A: The website has inventory feeds to your local store to see if the online request can be fulfilled. If your local store does not carry it, the website will suggest the next one that does. The onlineorders@cantire.com can provide you with the details to advise customers
3 years agoHelpful?
Q: The blade tension mechanism got unscrewed and came out. It looks like I cannot screw it back, as the v shaped nuts moved and fell inside. Is there a manual which shows how to open the think up?
Anonymous3 years ago1 Answer
A: This tool has tension mechanisms on the front and back. Additionally, this component generally does not require assembly, thus it is not listed in the manual. If you can send us photo , we can provide more details
3 years agoHelpful?
Q: HI.can you get parts? maximum scroll saw 18'] i droped my saw, broke speed switch,on off switch and lost table insert.i thank you very much for your time.my saw is a Masterforce scroll saw but it is the same [i can't find any parts here in the US thank .
5 years ago1 Answer
A: We dont carry Masterforce scroll saw parts for that reason we are not able to recommend
4 years agoHelpful?
1 - 10 of 22 Questions
