JBL
JBL GX-A604 4 Channel Amplifier
#035-0260-8
$239.99
Top Rated
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Similar Items
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
- Features
- Specifications
- Resources
JBL GX-A604 4 Channel Amplifier is a 435 Watt, 4-channel, full-range powerhouse amplifier
Features a cast-aluminum heat sink, built-in electronic crossover networks and bass boost circuits
On-board variable electronic crossovers and variable Bass EQ makes this a versatile system building tool for the audiophile
Easy to install, yet can serve as the foundation of a truly sophisticated sound system
4-Ohm Power Output: 60W rms x 4, less than 1% THD+N
2-Ohm Power Output: 85W rms x 4, less than 1% THD+N
Bridged power output: 170W x 2 into 4 ohms
Total peak power output: 435W
Signal-to-noise ratio: 93dB (ref rated output @ 4 ohms)
Frequency response: 20Hz−20kHz ±1dB
THD+N: less than 1%
Input sensitivity: 200mV−20V
Variable bass boost: 0 to +12dB @ 45Hz
Dimensions: 11-13/16 L x 8-1/8 W x 2-1/16" H (30 x 20.6 x 5.2 cm)
| Part Number | GX-A604 |
|---|---|
| Package Depth (cm) | 24.89 cm |
| Package Depth (in) | 9.80 in |
| Package Height (cm) | 10.80 cm |
| Package Height (in) | 4.25 in |
| Package Weight (kg) | 3.10 kg |
| Package Weight (lb) | 6.83 lb |
| Package Width (cm) | 33.53 cm |
| Package Width (in) | 13.20 in |
Warranty
This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Compare Similar Products
Only Show Differences | Currently Viewing | |||||
| Ratings | ||||||
| Package Depth (cm) | 24.89 cm | |||||
| Package Depth (in) | 9.80 in | |||||
| Package Height (cm) | 10.80 cm |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Review Highlights
Reviews
Filter Reviews
- noise level
- connections
- controls
- for gaming
- installation
- price
- purchase
- quality
Rating
Locale
1 to 4 of 4 Reviews
1 – 4 of 4 Reviews
Most Recent
4 out of 5 stars.
Great Amplifier but...
7 years ago
I bought this amp and it has a lot of settings. But if you are connecting 2 middle speakers with 1 subwoofer ( or as my case only 1 subwoofer ) you definitely need power capacitator to power up the amp, otherwise, it will drop off when you pump the volume up. It's heating up so it's better to mount it in open space not in closed box or confined space
Yes, I recommend this product.
Originally posted on jbl.com
5 out of 5 stars.
Van Instalation and it is wicked
7 years ago
I have just had this installed in my Companies delivery van and it is awesome, it is firing a pair of 3 ways as Mid and Tweeter which I will change for a pair of JBL's now and an 8inch passive sub and it sounds great, got to get a monorail for the sub and use the GX-A604 for my high range in the dash, I am a JBL Lover any ways, I use the 2 control 10's in my home cinema set up.
I highly recommend this amp to anyone.
Yes, I recommend this product.
Originally posted on jbl.com
5 out of 5 stars.
Great inexpensive amp!
9 years ago
I'm using this amp driven by a JBL MS-8. The amp is a good step up from
your typical 20W/channel systems. Very noticeable gain difference in that it plays loud and clean w/little distortion. Using 2 of 4 channels bridged for a passive sub and that works well too. Recommended.
Yes, I recommend this product.
Originally posted on harmanaudio.at
4 out of 5 stars.
Powerful
10 years ago
Good clean and powerful sounding amplifier that is comparable to a high priced item.
Yes, I recommend this product.
Helpful?
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 22 Questions
Most helpful answers
Q: Can i use this to power my 4 jbl gx602’s?
7 years agoOriginally posted on jbl.com
1 Answer
A: Yes the GXA604 amplifier will work with the GX 602 speakers without any issues.
7 years ago
Q: I'm using the GX-604 4 channel amp with 4 JBL 6.5" CS762 coaxial speakers. What should I have be level set to? 0.2v or 4.0v? Thanks
7 years agoOriginally posted on jbl.com
1 Answer
A: Hi Ainsley, Thank you for the question. You might find the answer to your question in our Product Support FAQ and Knowledgebase Sections. The link is located at the top of this page. To submit a support case, please fill out the Contact Us form at the same location.
7 years ago
Q: Hello. Does this amp work in 3 channels? having 2 straight for components and the other 2 bridged for a subwoofer? Thanks :)
7 years agoOriginally posted on jbl.com
1 Answer
A: We would like to work with you directly to help you with your issue. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
7 years ago
Q: Can I use the GX-A604 to power a JBL CS1204B subwoofer and 2 13cm speakers with a max 250W power output and 35W RMS, without loosing any sound quality? or should I just power the sub only? Thanks
8 years agoOriginally posted on jbl.com
1 Answer
A: The GX-A604 is can power the sub but it would be too much for the speakers since they can only handle 35 RMS while the GX-A604 only handles 60W at 4 ohms and 85W at 2 ohms. If you're planning on connecting the speakers I would advise not to crank it up too much as it may damage the speakers in the long run.
8 years ago
Q: Hi, will GX-A604 properly power front pair GT7-6C 6.5" and rear pair Gt7-96 6"x9" ? Is there any possibility of overheat on maximum power? And last one. Is there any output for monoblock amplifier?
8 years agoOriginally posted on jbl.com
1 Answer
A: This set-up will work okay as long as you set your front and rear levels correctly. The GX-A604 can output up to 60W to 4-ohms speakers - which is the impedance of the GT7 series speakers. The The GT7-6 and the GT7-96 can handle up to 45 and 70W respectively. This means that as long as you set your front levels a to around 75% of the way, you should be alright and there should be ideally no risk at maximum power. This amplifier does not have a pre-out to be bridged to another amplifier. As an alternative, you can split the output from the head unit going to your fronts, with a Y-adapter, going to the monoblock amplifier. For further help, please submit a case at jbl.com/contact-us and our Customer Service Group will be glad to assist you.
8 years ago
Q: i bought 2x gto609c component speakers. what amplifier would best to install together n how is the wiring?
8 years agoOriginally posted on jbl.com
1 Answer
A: You can bridge these GTO609c to the GX-A604 so the amp will provide 170W per speaker since the GTO609C can handle up to 200W.
8 years ago
Q: Hello, I have a pair of Stage 9603 and one of stage 502, it's this amplifier to much for those speakers?
8 years agoOriginally posted on jbl.com
1 Answer
A: The GX-A604 drives 60W x4 @ 4 ohms while the Stage 9603 can handle 70W at 4 ohms, unlike the Stage 502 can handle 35W at 4 ohms. In a nutshell, the Stage 9603 can handle the amplifier while the Stage 502 cannot handle the amp due it's low power handling.
8 years ago
Q: I want to take my rear channel speaker high level output and tie into the GZa604 amp and get 4 channel output. Will this work, do I have to tie into both high level inputs or just 1 input? Does this amp come with 1 or 2 high level input cables?
8 years agoOriginally posted on jbl.com
1 Answer
A: We would like to work with you directly to help you with your issue. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
8 years ago
Q: Am I able to run a pair of 2ohm and a pair of 4ohm speakers on this amp simultaneously without causing damage?
8 years agoOriginally posted on jbl.com
1 Answer
A: Yes, you will be able to connect a pair of 2-ohms speakers and a pair of 4-ohms speakers on this amp simultaneously without causing damage as each power amplifier channel can handle down to 2-ohms at maximum power output of 85 watts.
8 years ago
Q: I bought this amp! I have an Infinity Reference 860w 8 inch subwoofer( 250 Watt RMS, 4 ohms) I am only hooking up this one sub...no other speakers. I'm not too sure how to wire it up though. Are they compatible?
8 years agoOriginally posted on jbl.com
1 Answer
A: You can bridge the subwoofer to this amp by using the rear set of wire terminals. Run wire from the sub's positive terminal to the amp's rear left positive terminal. Run a wire from the sub's negative terminal to the rear right negative terminal. Doing so will provide the sub with 170 watts RMS at 4 ohms but this will leave the other two channels unused. Also, this may help you on how the control switches needs to adjusted. - Set the input mode switch to 4 channel. - Set the high pass switch to ON. - Set the x-over switch to LP (low pass) - If needing more bass enhancement, switch bass boost to ON
8 years ago
1 - 10 of 22 Questions
