CURT 13603 Class 3 Trailer Hitch, 2-in Receiver, Fits Select Kia EV6

Fits very well. Quite heavy, would be tough to do by yourself. I also used a jack to hold up the hitch while I was putting the first bolts into place, and then my wife helped balance it while I put in the bolts. I put the car up on a couple of layers of 2x6; raised it about 3" which was handy and enough to make it reasonably comfortable. The thing that took the longest was clearing out the holes. My car is a 2022 so holes had rusted up to some extent. I used the "extra" short bolt that holds the spacer to do all the cleaning out (with WD40) so as not to wear out the structural bolts. Instructions and videos on line are helpful; they tell you to move a connector which is very difficult to interpret looking at the picture, but when you get under the car and read the description carefully, it is clear. Only thing is it tells you to move the connector to the new location before putting the hitch in place; it would have been easier to remove the connector, figure out where it goes, and then not snap into place until after the hitch was up. Looks just like their pictures, quality hitch that doesn't distract from the look of the car.