Mastercraft
Mastercraft Sandblasting Cabinet
#299-5511-4
$199.99
Exclusive
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Similar Items
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
Mastercraft Sandblasting Cabinet allows you to remove paint, rust and other debris while keeping all abrasive media safely contained inside
PSI average air consumption: 2.4 CFM @ 90 PSI
Sliding door opening allows loading of bulky parts
Extra- large work area for large and more bulky work pieces
Acrylic protective screen with replaceable shield
Includes: abrasive gun, ceramic nozzles, 28" (70 cm) long hose and rubber gloves
Weight: 37.5 lbs (17 kg)
Dimensions:25.2 L x 20 W x 20.47" H (64 x 50x 52 cm)
| Part Number | STF-90 |
|---|---|
| Chest/Cabinet Type | Bottom Tool Cabinet |
| Assembled Length (in) | 17.72 in |
| Assembled Width (in) | 18.11 in |
| Assembled Height (in) | 22.83 in |
| Primary Material | Steel |
| Colour | Blue |
| Accessories List | No Accessories Included |
| Number of Drawers | 1 |
| Number of Doors | 5 |
| Number of Pieces | 1 |
|---|---|
| Advanced Features | Scratch Resistant |
| Frame Steel Gauge (ga) | 24 ga |
| Maximum Weight Capacity (lb) | 41.89 lb |
| Capacity (in³) | 5490.00 in³ |
| Assembled Weight (lb) | 41.89 lb |
| Wheel Diameter (in) | 22.83 in |
| Duty Rating | Heavy Duty |
| Package Width (in) | 17.72 in |
| Package Depth (in) | 23.03 in |
| Package Height (in) | 18.11 in |
| Package Weight (lb) | 26.46 lb |
Warranty
- This product carries a 3 year exchange warranty redeemable at any Canadian Tire store.
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | Currently Viewing | |||||
| Ratings | ||||||
| Chest/Cabinet Type | Bottom Tool Cabinet | |||||
| Assembled Length (in) | 17.72 in | 1.97 in | 5.51 in | 10.63 in | 5.12 in | |
| Assembled Width (in) | 18.11 in | 0.98 in | 5.51 in | 4.80 in | 1.57 in |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Review Highlights
Reviews
Filter Reviews
- light
- purchase
- sanding
- price
- glass
- dirt
- finish
- closing
Rating
Locale
1 to 5 of 13 Reviews
1 – 5 of 13 Reviews
Most Recent
1 out of 5 stars.
Blasts great but poor QA
4 years ago
I bought this two days ago and already might have to exchange it twice. The first one I got had been smashed in on the side so the door wouldn't close during packaging. The box looked perfect. The second one came with cracked door glass and the light died within an hour. There were also a number of other small issues ( silicone sealant to keep sand in the cabinet comes off if you look at it, light connector into the cabinet is cracked in half, etc. )
It blasts great. I just wish I could convince the cabinet to keep up.
No, I do not recommend this product.
Helpful?
4 out of 5 stars.
fonctionne très bien
5 years ago
J'ai se sand blast depuis maintenant 4 ans il fonctionne très bien mais il nécessite un bon compresseur lorsqu'on l'utilise longtemps et une shop vac avec un sac a particule pour bien voir se que l'on fait par la fenêtre
Translate with GoogleYes, I recommend this product.
Helpful?
5 out of 5 stars.
WORKED GREAT
5 years ago
The blasting cabinet came out the box as expected. the light works and has for several hours of use now, no issue so far as per other reviews.
I have tried Crushed glass 20-30, glass bead B7 and BT13. all have worked well.
I brought 50lb bags of media. i put in about 15lbs-ish in the machine (basically filled the base to just below the mesh floor). I have gotten a beautiful finish on the parts I was ether paint stripping, restoring or simply creating a peened/textured finish from the glass bead (b7). I have blasted Alloy, carbon steel and stainless steel.
On Aluminum you should dial the pressure down a touch and/or blast from a further distance as it pits fast. Carbon and stainless i ran 100psi at the compressor and held the nozzle close. I used the smallest nozzle for all my work as i'm not doing large areas. For the large nozzle i would imagine more PSI might be needed. Its trial and error until you find what is right for the job you doing.
I also noted that with the super fine glass media (BT13) that it was clumping in the base of the machine due to high moisture in the air and line. This was not a problem with the machine.
I would only recommend, glass bead, crushed glass, walnut (polishing), corncob (polishing), aluminum oxide, copper and coal slag, soda in this machine. I would not use steel shot etc.
Sand blasting is not a simple thing, you need to learn you psi, and the media your using. any bad reviews on this machine were operator error for the most part. Read the manual!
I do however hope the light holds up as its an needed feature.
Yes, I recommend this product.
Helpful?
1 out of 5 stars.
More stuff for the scrapyard
6 years ago
No parts available from Canadian tire or anywhere else I would bother with. Out to the curb on goods exchange day
No, I do not recommend this product.
Helpful?
2 out of 5 stars.
junk
7 years ago
I bought this two months ago and have since thrown it out never did work right and it is a waste of money Not worth buying
Helpful?
1 – 5 of 13 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 16 Questions
Most helpful answers
Q: Is the light shown in the picture included?
9 years ago3 Answers
A: The light was included. It works fairly decently, but you'll have to lift the lid to get a good look at whatever you are blasting for areas that require a bit more work. Hooking up a shop-vac helps immensely with visibility.
9 years agoHelpful?
Q: Does CTC sell adapter that allow a vacuum to connect to the sand blast cabinet?
9 years ago2 Answers
A: the easiest way to connect it without an adaptor is with foil tape used in heating and air systems. its cheap, seals nicely and cuts easily
9 years agoHelpful?
Q: What is the minimum amt of media needed?
9 years ago2 Answers
A: To ensure the product works effectively the minimum amount of media required will need to cover the holes at the bottom of the spray gun. The maximum amount of media is 7L.
9 years agoHelpful?
Q: Gun won't syphon Brand new, I cannot get the sandblast media to syphon through the gun, I am using the sandblast media that came with it. I have no air leaks running my compressor at 80 psi. My compressor produces 15.4 cfm.
9 years ago2 Answers
A: A damp media, or slight kinking of the hose can prevent media from getting sucked up. I noticed with mine that I had to continually sweep media back to the middle so it could get sucked up. You either have to lift it from side-to-side to move the media, or use it without the metal screen installed and sweep media back to the middle to it can be sucked up by the hose.
9 years agoHelpful?
Q: Are there lights or replacement lights available for the sandblaster
9 years ago2 Answers
A: The power supply for my light failed after about one hours usage and I replaced it with a quality 12vdc 750ma unit. I had to move the plug from the failed unit to the replacement unit. My repair is still working a several hours usage.
8 years agoHelpful?
Q: would this hold a 14 inch car rim
5 years ago1 Answer
A: Yes, this product can hold a 14 inch car rim!
5 years agoHelpful?
Q: Is there a list of available replacement parts like the filters, gloves and clear plastic sheets to protect the glass I would be nice if these came with a manual!!!!
5 years ago1 Answer
A: In order to obtain the information you require, we encourage you to communicate with Mastercraft by calling 1-800-689-9928
5 years agoHelpful?
Q: Quelle type de compresseur est requis pour utiliser ce produit.
5 years ago1 Answer
- Translate with Google
A: Ce produit nécessite 2,5 CFM @ 100 PSI avec une consommation moyenne d'air de 2,4 CFM @ 90 PSI. Nous recommandons au moins 1 CV ou plus pour faire fonctionner l'armoire. Nous recommandons le compresseur d'air Mastercraft 5 gallons 1,5 CV (058-9315) ou le compresseur d'air Mastercraft 8 gallons 1,5 CV (058-9316). Pour cette armoire.
5 years agoHelpful?
Q: is a sandblasting gun required separately from this unit or does it just need a compressor and sand blasting media to use?
6 years ago1 Answer
A: Please kindly note that sku 299-5511 has sandblasting gun, just need a compressor and sand blasting media to use.Thanks.
6 years agoHelpful?
Q: Quelle quantité de sable faut-il mettre a l' intérieur pour son fonctionnement ? Sur la boite, y a le numéro de piece (sable) mais pas de quantité et quelle est la grosseur du grain ? Merci
7 years ago1 Answer
- Translate with Google
A: Remplissez la trémie avec environ 10 lb (4,5 kg) de produits de sablage, en vérifiant que les produits de sablage sont secs et propres. N'utilisez pas de produits de sablage abrasifs tels que de la grenaille d'acier. Pour plus d'informations, s'il vous plait appeler Mastercraft au 1-800-689-9928.
6 years agoHelpful?
1 - 10 of 16 Questions
