Black & Decker
Black & Decker GarageEpoxy™ Garage Floor Coating Paint, Satin
#048-9025-6
$64.99
Exclusive
Brown
- Brown
- Light Grey
Buy Online :
- FREEAvailable
- Available
- Unavailable
Pick up at Leduc, AB
Get it Today !7 In Stock
Pick up available 04:30 p.m., Dec 04
Quantity updated to 1
Also Find It in Store:Aisle 47
Only 7 left
at Leduc, AB
Add to Registry
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
Black & Decker GarageEpoxy epoxy floor coating helps transform dull, dirty concrete into a smooth, easy-to-clean surface. This two-in-one formula epoxy coating provides exceptional bonding power and durability, resisting stains, hot tires and weathering for years to come. It applies easily with rollers or brushes, adhering up to four times stronger than conventional garage floor paints. The satin finish makes spills, messes and debris easy to wipe clean, keeping your workspace neat and tidy for a long time.
Black and Decker Garage Floor Coating applies directly to floor surface with zero mixing required
Up to 500 square feet of protection, enough surface protection for 2 full-sized vehicles
Applies directly to concrete, eliminating the need for a primer
Includes advanced Epoxy + Acrylic technology formula for a durable and easy-to-clean finish
Prevents wear and tear from hot tires with 4x the resistance of conventional floor paints
Exceptional bonding power for long-term durability
Engineered for resistance from hot tires, weathering, and more
Volume: 3.7 L (1 US Gal)
Available in a variety of colours
| Part Number | 80706638 |
|---|---|
| Paint Type | Interior Floor/Masonry Paint |
| Job Type(s) | Concrete |
| Paint Finish | Satin |
| Paint Can Size | 3.7 L (1 gallon) |
| Paint Premixed Colour | Brown |
| Advanced Features | One coat coverage, Paint&Primer in one, Driveable Surface, High Foot Traffic, Low-Odour, Moisture Resistant, Mildew Resistant |
| Paint Maximum Coverage Area (sq ft) | 499 ft² |
| Paint Maximum Coverage Area (sq m) | 46 m² |
| Paint VOC Level | Low VOC |
| Application Method | Roller |
|---|---|
| Paint Clean up | Soap&Water |
| Dry Time (min) | 120 min |
| Recoat Time(hr) | 6 h |
| Shelf Life (year) | 3 yr |
| Shelf Life After Opening (Month) | 12 mo |
| Minimum Operating Temperature (°C) | 15 °C |
Warranty
- This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | |||||
| Ratings | |||||
| Paint Type | Interior Floor/Masonry Paint | Interior Floor/Masonry Paint | Interior/Exterior Floor/Masonry Paint | Interior/Exterior Floor/Masonry Paint | |
| Job Type(s) | Concrete | Concrete, Wood, Multi-surface, Decks | Porch/Floor, Concrete | Concrete | |
| Paint Finish | Satin | Satin | High Gloss | Satin |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Frequently Bought Together
+++
$275.46
Review Highlights
List of Pros Highlights
Pros
List of Cons Highlights
Cons
Suitable Cons could not be generated at this time.
Reviews
Customer Images and Videos
Filter Reviews
- parking
- instructions
- wait time
- holding
- finish
- large
- performance
- protection
Rating
Locale
1 to 5 of 12 Reviews
1 – 5 of 12 Reviews
Most Recent
4 out of 5 stars.
Good product but coverage was less than advertised.
a month ago
Called for 1 can for a double garage but I required 2 . It was the first time it was painted so not sure if that was a factor.
Helpful?
5 out of 5 stars.
Beau travail
a month ago
5 out of 5 stars.
Love this epoxy.
a month ago
Used this beige epoxy to paint over an older grey epoxy that was peeling after a few years. After proper cleaning and preparation, this epoxy was easy to apply. Waited about 10 days before parking SUV and after 2 summer months, no problems whatsoever. Garage floor never looked so good.
Helpful?
3 out of 5 stars.
Not bad
4 months ago
Good product but not compatible with epoxy chips. Little pricy because I was planning to add chips on it but they don’t float
Helpful?
1 out of 5 stars.
Paint Failed Within 2 Weeks of Application
5 months ago
I’m extremely disappointed with the performance of this garage floor paint. Despite following the instructions carefully, the paint began peeling and lifting in multiple areas just two weeks after application.
Prior to applying the product:
• The concrete surface was thoroughly cleaned and degreased.
• I ensured it was completely dry before applying the paint.
• I also avoided any traffic, water exposure, or heavy items on the surface during and after the curing period, as recommended.
However, the paint has already started delaminating, particularly in areas where no unusual wear or load has occurred. The failure appears to be due to poor adhesion, despite proper surface preparation. There were no temperature or humidity extremes at the time of application.
As you can see in the attached photos:
• The paint is peeling off in sheets and chips.
• Underneath the peeled paint, the concrete remains intact and clean, indicating the product did not bond as expected.
• This issue has occurred in a low-traffic area, confirming it’s not a result of abrasion or misuse.
No, I do not recommend this product.
Helpful?
1 – 5 of 12 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 9 of 9 Questions
Most helpful answers
Q: Can it be applied in the winter
28 days ago1 Answer
A: Hello, the product should be used indoors and as long as the floor temperature remains above 18 degrees celsius, the floor is verified for humidity, prepared and cleaned as per the instructions on the label all will work properly. Please note that our delays are based on the floor being at 20 degrees celsius the product is Dry to the touch — 1 to 2 h To circulate — 24 h Hot tires — 7 days. Thank you
27 days agoHelpful?
Q: Would this work for a sealing a sauna floor, worried about off gasing?
10 months ago1 Answer
A: Unfortunately, this product may not be the best choice for your project due to the high humidity it will be exposed to, as this could impact its durability. I recommend a 2-component MVB epoxy, which is better suited to withstand the high humidity conditions in a sauna.
10 months agoHelpful?
Q: Can you add metallic tint ?
a year ago1 Answer
A: Unfortunately, the product is already pre-mixed, meaning it isn't designed to incorporate a metallic tint. If you still wish to proceed with adding one, we can't assure the outcome. However, if you're aiming for a glossier shine, you can apply a clear coat over our product after it has fully dried.
a year agoHelpful?
Q: CanI use this on cement that has been painted? Do I need to fill the cracks and sand the floor first ?
a year ago1 Answer
A: Yes, this product can be used on painted cement. However, proper surface preparation is essential before applying the product. Here are the steps you need to follow: 1. Clean the surface using a concrete cleaner or a garage floor cleaner. 2. Sand the surface to dull the finish of the previous paint. This will help the new product adhere better to the surface. 3. Remove the sanding dust. 4. Optionally, fill any cracks on your concrete floor for a more uniform finish. While not mandatory, this step is recommended as the product may not be thick enough to fill cracks. If you choose to fill cracks, ensure they are fully dry before applying the paint. 5. Finally, you're ready to apply the product to your concrete floor!
a year agoHelpful?
Q: Can this be used on a small porch and steps that is previously painted?
a year ago1 Answer
A: Hi, Unfortunately, we do not recommend using this product for outdoor applications. The epoxy component inside makes the surface hard but not flexible enough to withstand the fluctuations in temperature during winter and spring. This could lead to cracking of the paint. Instead, I would recommend our Porch and Floor paint for your project. It's made with acrylic and urethane, providing flexibility and resistance to temperature changes. You won't need a primer, even if the surface is already painted. However, proper surface preparation is essential. Here are the steps you should follow: 1. Clean the surface thoroughly using a good suitable porch cleaner. 2. Lightly sand the surface to remove any glossiness. You don't need to sand down everything, just enough to provide a good surface for the paint to adhere to. 3. Remove all sanding dust. 4. You'll be ready to start painting after completing these steps!
a year agoHelpful?
Q: Can you do a Second coat and if so when?. The can says one coat but I’d like to do two if it won’t undermine the coating.
a year ago1 Answer
A: Yes to second coat after minimum 24 hours in good drying conditions. Best to wait 48 hours (some environments are cold and damp and can delay curing)
a year agoHelpful?
Q: Can this product be applied over a cement floor that has previously been treated with a sealer
a year ago1 Answer
A: Each sealer is unique and some might require a light sanding to scuff the sheen. We suggest making a test over at small inconspicuous area before applying over the full surface.
a year agoHelpful?
Q: Is this product good for also waterproofing a furnace room floor to prevent moisture wicking up from under the floor?
2 years ago1 Answer
A: This product is a good finishing coat over a moisture vapour barrier primer but it won’t replace it.
2 years agoHelpful?
Q: Can this be used directly on plywood as well?
2 years ago1 Answer
A: Yes, it can. However, if the plywood is exposed to the elements and seasons outside, we recommend using the Porch+Floor product instead (Product 048-9028 Beige & 048-9025 Grey). It is more flexible and resilient to temperature changes compared to epoxy-based resins. For indoor use, there is no problem with either one.
2 years agoHelpful?
