Rust Check Rust Killer, 350-g
- FREEAvailable
- Available
- Unavailable
Pick up available 05:30 p.m., Feb 03
Quebec residents: For information on maintenance and repair click here.
Product Details
The Rust Check Rust Killer halts rust progression and rejuvenates the appearance of your items. This 350 g product creates a primed surface for topcoats, requiring no sanding and can be applied directly on rust.
Stops rust from spreading and restores appearance
Provides a primed surface for topcoats and can be applied directly over rust
No sanding required
Resists high temperatures and common household chemicals
Ideal for vehicle repair: excellent for touch-ups of surface rust spots, auto body repairs, frame rails, axles, differentials, and trailer hitches
Can also be used for equipment repair: great for farm, garden, landscaping, snow removal, and industrial equipment - can also be used on machinery and tools
Can also be used for structure repair: ideal for metal sheds, metal fences and railings, steel window or door frames, flashings, park benches, playground equipment, wrought iron garden furniture, garbage cans and bins and loading docks
Touch up rust surface spots, home repairs, frame rails, etc. No sanding required.
Size: 350 g
| Part Number | 11000 |
|---|---|
| Flammable | Yes |
| Non-toxic When Used as Intended | No |
| Advanced Features | No Advanced Features |
| Product Height (in) | 7.87 in |
| Product Weight (lb) | 1.10 lb |
| Chemical Form | Aerosol |
| Flash Point (°C) | 18.00 °C |
| Painting Chemical Type | Rust Remover |
| Product Volume (L) | 0.40 l |
| Surface Type | Metal |
|---|
This product carries a manufacturer warranty. Please visit or contact your local Canadian Tire store for details. This product carries a manufacturer warranty. Please visit or contact your local Canadian Tire store for details.
View user manuals and additional product information
Pick Up is free at most stores (some stores require a minimum order value before tax)
Shipping fee is based on size and weight of products and distance from address to store
Same-Day Delivery costs $9.99 per order
Same-Day Delivery and Ship to Home are unavailable for tires and wheels
Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
Some products are non-refundable and non-exchangeable
Special order hard parts and specific application automotive parts must be returned to original store of purchase
The return info outlined above may not apply to the product you are currently viewing. For complete details and exceptions, please refer to our Return Policy.
Compare Similar Products
Only Show Differences | Currently Viewing | |||||
| Ratings | ||||||
| Flammable | Yes | Yes | Yes | No | Yes | |
| Non-toxic When Used as Intended | No | No | No | No | No | |
| Advanced Features | No Advanced Features | No Advanced Features | No Advanced Features | No Advanced Features | No Advanced Features |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Review Highlights
Reviews
Customer Images and Videos
Filter Reviews
- purchase
- quality
- instructions
- price
- ease of use
- wait time
- thickness
- functional
Very bad qulaity
Rust Check rust killer
Right over the rust made the paint stick and didnt blead
Timely cover up.
Long drying time!!!
Questions
Q: what do you use to clean off overspray
4 years agoA: Wipe off with a cloth.
4 years agoHelpful?
Q: If I use it as one coat, how many square foot One Canister will cover
4 years agoA: Rust Check Rust Killer (aerosol) will cover approximately 10-12 sq. ft with good coverage. The coverage will vary slight based on the application process (thickness of applictation) and substrate.
4 years agoHelpful?
Q: I need help please. Can I apply this product on top of body filler ? Can I also apply this product on rest of hood as primer, before painting ? Thanks
4 years agoA: This product can be applied on top of filler but is not designed to be. It is designed to be used in spot repair areas where a rust converter is not practical for use to seal and neutralize rusted areas. If the area is accessible and not near finished paint areas we would recommend treating the area manually (grinder/sanding) and following with Rust Converter ( #047-7964-4 or #047-7965-2). After which, wipe the surface well with water, allow to dry before applying the filler. Ensure the filler has fully dried and is clean of any sanding dust before applying a sealer primer.
4 years agoHelpful?
Q: Does this spray on white or clear?
6 years agoA: I believe this may be a mixing issue. If mixed properly, the applied coating will appear light grey. This product contains lots of filler / pigment which settles out and must be mixed thoroughly to a uniform consistency before spraying. The mixing is accomplished by slowly inverting can upside down, then returning to an upright position – no more than 60 times/minute. If you invert too fast or just shake the can, then no mixing occurs! I mix until the ball is moving freely, then mix for an additional 2-3 minutes. If improperly mixed, then coating with very little filler/pigment will be applied and will appear light, even off-white. It may not even cure properly unless properly mixed.
6 years agoHelpful?
Q: 2005 jeep t.j 6 cyl. if I need to use small amount body filler do I apply rust check rust killer before or after? can rust killer be applied on top of body filler?
6 years agoA: We do not recommend using polyester type fillers over Rust Killer primer. The Body Filler is designed to fill and level a panel and must be used on clean untreated metal for proper adhesion. If Rust Killer is to be used in such a situation, it would be done after any filling requirement has been satisfied..
6 years agoHelpful?
Q: So if I spray this over rust will it prevent the rust from spreading or will it just cover it up?
7 years agoA: Most of the loose rust should first be removed. On areas with very little rust, the coating will cure to an off-white film appearance. On highly rusted spots you may see brownish spots/discoloration due to the conversion process. Just let it fully cure before top-coating.
7 years agoHelpful?
Q: Does it affect the brake pads if spray over ?
7 years agoA: Rust Killer is an alkyd based coating and should not be sprayed over brake pads. This may affect brake performance.
7 years agoHelpful?
Q: Why don't Rust Check products list the time between coats like all other products do. There were no instructions so I used the times for Dupli-Color Perfect Match paint. It is bad enough that the instructions are in microprint but they should be complete.
7 years agoA: • Usually one coat is sufficient to cover the substrate with a dry time of 2 to 3 days • If an additional coat of Rust Killer applied, then the minimum dry between coats should be 16 hours to 2 days • When two coats of Rust Killer are applied, the required dry time before top-coating will increase to 5 – 7 days • These dry times will increase if there is poor ventilation, low temperatures or if the applied coating is too thick.
7 years agoHelpful?
Q: Does the white ever go away ?
7 years agoA: This may be a mixing issue. If mixed properly, the applied coating will appear light grey. This product contains lots of filler / pigment which settles out and must be mixed thoroughly to a uniform consistency before spraying. The mixing is accomplished by slowly inverting can upside down, then returning to an upright position – no more than 60 times/minute. If you invert too fast or just shake the can, then no mixing occurs! Mix until the ball is moving freely, then mix for an additional 2-3 minutes. If improperly mixed, then coating with very little filler/pigment will be applied and will appear light, even off-white.
7 years agoHelpful?
Q: How long does Rust Killer take to dry? The question was not answered. If thin coats are applied, how long between each Rust Killer coats, and how long before paint can be applied. Thanks,
9 years agoA: Usually one coat is sufficient to cover the substrate with a dry time of 2 to 3 days. If an additional coat of Rust Killer is applied, then the minimum dry between coats should be 16 hours to 2 days. When two coats of Rust Killer are applied, the required dry time before top-coating will increase to 5-7 days. These dry times will increase if there is poor ventilation, low temperatures or if the applied coating is too thick.
9 years agoHelpful?
