101
EASYHEAT Automatic Electric Water Pipe Heating Cable, 3/8-in -1½-in
#052-2592-4
$48.99
Top Rated
105 W
- 105 W
- 126 W
- 168 W
- 210 W
- 21 W
- 42 W
- 63 W
- 84 W
Buy Online :
- FREEAvailable
- Available
- Available
Pick up at Leduc, AB
Get it Today !12 In Stock
Pick up available 06:00 p.m., Feb 20
Quantity updated to 1
Also Find It in Store:
12 In Stock at Leduc, AB
Aisle 54
Add to Registry
Quebec residents: For information on maintenance and repair click here.
Product Details
This ready-to-use EASYHEAT heating cable protects pipes from freezing damage and is easy to install for the do-it-yourselfer seeking insurance in plunging temperatures. An integrated energy-saving thermostat automatically switches the cable on when temperatures dip to critical levels, shielding water pipes from freezing. The heating cable then activates and deactivates automatically as needed. No complicated setup required — just plug in for peace-of-mind pipe protection.
Keeps water flowing down to -40°F (-40°C)
For accessible metal or plastic water supply pipes only
Fits pipe diameters from 3/8" to 1½"
GFCI required (receptacle or portable GFCI cord)
Simply wrap the tough inner wire insulation, ground braid and weather-resistant outer jacket around your pipes and plug in
Includes thermostat and easy-to-follow instructions
Three wires per cable, seven watts per foot, 120 volts
UL and CSA certified for safety when used as directed
This product carries a 1 year exchange warranty redeemable at any Canadian Tire store
| Part Number | 31015 |
|---|---|
| Accessories List | Thermostat |
| Advanced Features | Grounded Plug, Weather Resistant |
| Amperage | 2 A |
| Assembled Length (cm) | 24.76 cm |
| Assembled Length (ft) | 0.81 ft |
| Assembled Length (in) | 9.75 in |
| Assembled Weight (kg) | 0.56 kg |
| Assembled Weight (lb) | 1.23 lb |
| Certifications | CSA Listed, UL Listed |
| Heating Cable Type | Pipe Heating Cable |
|---|---|
| Indicator Light Type | Power |
| Maximum Pipe Diameter (cm) | 3.81 cm |
| Maximum Pipe Diameter (in) | 1.50 in |
| Maximum Pipe Diameter (mm) | 38.10 mm |
| Minimum Pipe Diameter (cm) | 0.95 cm |
| Minimum Pipe Diameter (in) | 0.38 in |
| Minimum Pipe Diameter (mm) | 9.53 mm |
| Minimum Temperature Protection Rating (°C) | -40.00 °C |
| Minimum Temperature Protection Rating (°F) | -40.00 °F |
| Primary Colour | Black |
| Voltage (V) | 120 V |
| Wattage | 105 W |
Warranty:
- This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | |||||
| Ratings | |||||
| Accessories List | Thermostat | No Accessories Included | No Accessories Included | No Accessories Included | |
| Advanced Features | Grounded Plug, Weather Resistant | No Advanced Features | No Advanced Features | No Advanced Features | |
| Amperage | 2 A |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Review Highlights
Reviews
Customer Images and Videos
Filter Reviews
- installation
- purchase
- quality
- for cold weather
- instructions
- price
- draining
- light
Rating
Locale
1 to 5 of 69 Reviews
1 – 5 of 69 Reviews
Most Recent
4 out of 5 stars.
Bien
3 hours ago
Bon produit mais je ne sais pas si ca se fais mais il faudrais un plus fils pour le relier a la boite de courant
Translate with GoogleHelpful?
1 out of 5 stars.
failed thermostat dangerous
a day ago
thermostat failed the wire over heated burning the foam insulation and water line. this ended up with frozen pipes and no water for a week. the other one I bought failed to even heat up causing sewer pipe to freeze
No, I do not recommend this product.
Helpful?
4 out of 5 stars.
does the job
5 days ago
does the job .. it could be a little easier to handle
Helpful?
5 out of 5 stars.
Works excellent
15 days ago
Used to thaw water lines and plumbing and to prevent them from freezing again. By the time I applied heat trace and insulated pipes, plugged in cord and walked back upstairs everything was already thawed and working again as it should. Have had extremely cold days since then and have had no issues at all with frozen lines or plumbing. Cost effective for sure
Helpful?
5 out of 5 stars.
Câble de chauffage
a month ago
1 – 5 of 69 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 39 Questions
Most helpful answers
Q: Est-ce que le fils peut être enfoui dans le sol sur l’arrivée d’eau d’un puit pour le chalet? Merci
3 years ago3 Answers
- Translate with Google
A: Nos câbles chauffants AHB ne peuvent pas être enterrés sous terre, ils doivent être installés dans un environnement intérieur, où il fait sec.
3 years agoHelpful?
Q: Pour le fil chauffant es ce que nous pouvons mettre des tubes de mousse par dessus le fil et le tuyau?
4 years ago3 Answers
- Translate with Google
A: Yes, the foam insulation should be non-flammable and non-combustible with an R Value of 1.8.
4 years agoHelpful?
Q: Can you use this outdoors on a PVC outflow pipe for a sump pump -- ie a drain pipe? Wrap it with insulation? Can it be on constantly since it is below freezing most of the time for a couple of months?How much power does it consume?
5 years ago3 Answers
A: It works fine with PVC. With a Sump application care must be taken that outflow, actually has a place to-go-to (flow volume/direction). Above-ground/exposed PVC, should be insulation wrapped to increase efficiency. Electrical tape is handiest to attach the Heat-line then apply insulation. Foam pipe insulation is really handy if the diameter of sump hose will allow. Again electrical tape or zip-ties work well. The product is designed to consume energy (watts/per foot) per the Specs. on "Product Details", keeping the entire cord length just above freezing, consistently. The products' thermostat (self-regulating) will self-recognize "foot-to-foot" installation conditions and supply variable power to colder pipe (this foot, but not as much the foot next to it) as needed. This IS a proven technology. I've used it for hose-bibs to 400' lake-water intakes to roofing and drainage for 25 years. Your total Electrical consumption really is efficient and only depends on how much sump-hose is above-ground. In my Use, 6 meters, 1/2 below grade (above/below/above/below again), "on" 24/7 all winter, is hourly consuming a little more than a 75 watt light bulb. Hope this helps.
5 years agoHelpful?
Q: I can’t find any spec that shows how long this cable is. The only spec about length says “assembled length is 9.75 inches”, which doesn’t make any sense
2 months ago2 Answers
A: I believe the cable length and wattage rating are usually on a white label that is stuck onto the plastic packaging - maybe the one you looked at has the label missing? Correct 9.75 inches does not make sense. It would be more likely be 6, 12, 15, 20, 30 feet.
2 months agoHelpful?
Q: Cord End Light Blinking
a year ago2 Answers
A: We would like to have a conversation with you regarding this inquiry. Kindly give us a callback on our toll-free hotline, 1-800-621-1506. Choose option 2 for technical support and option 3 for heating cables systems. We are open from Monday to Friday, 7 am to 7 pm central time.
a year agoHelpful?
Q: could this electric water pipe heater be used on a copper pipe that is 5 to 8 inches below ground
a year ago2 Answers
A: Our AHB Heating Cables are designed exclusively for water-filled metal or plastic supply pipes that are above ground and must remain dry at all times. For applications involving water pipes located a few inches below ground, we recommend using our wet-rated products, such as the SR Trace and PSR Heating Cables. It’s crucial that the underground pipe is accessible to ensure proper installation of the cable according to the instructions, and it should be insulated with waterproof insulation as well.
a year agoHelpful?
Q: how do I know what wattage to choose? We will use this for our home's main water line in the basement .
2 years ago2 Answers
A: The AHB heating cable is rated at 7 watts per foot, 120 Vac. Therefore, this will depend on the length of your plastic/metal waterline. The cables come in pre-terminated lengths that range from 3 feet to 80 feet. Do take note that the cable should only be installed in a straight manner. Pipes must be at least 3 feet long and at least ⅜” and no more than 1 ½” in diameter and used only in appropriate locations based on the manual. As for your reference, kindly see the links below for additional information regarding our EasyHeat AHB heating cable. Catalog: AHB Cable | EasyHeat Product Manual: AHB Cable | EasyHeat If you have additional technical questions, please contact us using our toll-free number 800 621 1506 then choose option 2.
2 years agoHelpful?
Q: Does my PVC drain pipe outside my garage have to be full of water to use this heat cable
2 years ago2 Answers
A: Our EASYHEAT Automatic Electric Water Pipe Heating Cables is used on water-filled metal or plastic (including PEX) supply pipes only. Do not use for anything else, such as drain lines, empty water pipes, fuel lines, steam lines, hoses, gutters, etc. Pipes must be at least 3 feet long and at least ⅜” and no more than 1 ½” in diameter. You can contact tech support +18006211506 for further qualification for a possible alternative heating cable that is appropriate for your drain line.
2 years agoHelpful?
Q: what w should be used
3 years ago2 Answers
A: We'll need more information about your pipe in order to give you the heating cable that is best suited for your pipe application. We will be more than helpful to have a phone discussion with you, our toll-free number 1-800-621-1506, choose option 2 for Technical Support, then option 3 for Heating Cable Systems. We are open from 7 am to 7 pm CST.
3 years agoHelpful?
Q: Can this heat cable be used to help unthaw all ready frozen pipes
3 years ago2 Answers
A: Our EasyHeat AHB Automatic Electric Water Pipe Heating cable is designed to prevent metal and plastic supply pipes from freezing. We recommend to thaw the pipe first before installing this cable.
3 years agoHelpful?
1 - 10 of 39 Questions
