MotoMaster
MotoMaster Oil Filter - FD
#017-1749-6|Part #MPH5
$6.79
Top Rated
- Part Number: MPH5
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Quebec residents: For information on maintenance and repair click here.
Need Installation Help?
Auto Services are available at your store
Similar Items
Product Details
- Features
- Specifications
- Resources
MotoMaster Oil Filter is engineered for both conventional and synthetic motor oils
Cellulose and glass blended media manufactured to meet or exceed vehicle requirements for OE recommended oil change intervals
94% filtration efficiency
| Part Number | MPH5 |
|---|---|
| Accessories List | No Accessories Included |
| Advanced Features | Anti Drain Back Valve, Bypass Relief Valve |
| Manufacturer Part Number | MPH5 |
| Package Depth (cm) | 9.77 cm |
| Package Depth (in) | 3.85 in |
| Package Height (cm) | 13.52 cm |
| Package Height (in) | 5.32 in |
| Package Weight (kg) | 0.45 kg |
| Package Weight (lb) | 1.00 lb |
| Package Width (cm) | 9.77 cm |
|---|---|
| Package Width (in) | 3.85 in |
Warranty
This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Review Highlights
Reviews
Customer Images and Videos
Filter Reviews
- price
- quality
- installation
- purchase
- satisfaction
- value
- performance
- staff
Rating
Locale
1 to 5 of 404 Reviews
1 – 5 of 404 Reviews
Most Recent
4 out of 5 stars.
Filter
2 years ago
Usually use these filters as they are cheaper than original ones and just as good.
Yes, I recommend this product.
Helpful?
4 out of 5 stars.
Works well
2 years ago
Followed guidelines. Works as intended. Installed at store garage
Yes, I recommend this product.
Helpful?
5 out of 5 stars.
MotoMaster Oil filter
2 years ago
I have used these for years. Always good quality at a good price
Yes, I recommend this product.
Helpful?
4 out of 5 stars.
OIl Filter
2 years ago
I have used this filter for my car that now has over 400000 km and still runs like new.
Yes, I recommend this product.
Helpful?
1 out of 5 stars.
motormaster oil filter
3 years ago
l do not know how to rate this purchase as l am not even sure if the oil filter was changed or not
No, I do not recommend this product.
Helpful?
1 – 5 of 404 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 24 Questions
Most helpful answers
Q: Looking for an oil filter for a 2012 kubota BX 25
3 years ago2 Answers
A: Fram ph6607 should work for kubota hh150 filter
3 years agoHelpful?
Q: Who manufactures the Motomaster filters? Last answer was more than 2 years ago. Who is currently (April 2015) making oil filters for Canadian Tires?
10 years ago2 Answers
A: Fram manufactures these. The Fram part number is PH8A while this part number is MP8HA. It is public information from Fram.
7 years agoHelpful?
Q: Can this MM filter effectively hold particles down to 15 microns or less? If not, which oil filter can do that? Thanks!
13 years ago2 Answers
A: As a clarification point, capacities of particles held does vary by filter type. However, Motomaster filters meet and exceed all OE standards for size of particle captured and amount of contaminant held.
13 years agoHelpful?
Q: Does the mph2 oil filter fit my 03 f-150 v8 5.4l
3 years ago1 Answer
A: Hi there, thank you for the question. The recommended MotoMaster Oil Filter for a 2003 Ford F-150 V8 5.4L is Part #MPH2 which has the corresponding CTC Product 017-1738.
3 years agoHelpful?
Q: Does this filter fit an Onan Performer 20?
3 years ago1 Answer
A: Hi there, Thank for your question. In order to recommend the correct filter, we will need specific details on which vehicle or machinery uses the Onan Performer 20 engine. I also recommend speaking to one of our store associates working behind the parts counter or a service advisor.
3 years agoHelpful?
Q: What is the Anti-drain back valve made of ?
5 years ago1 Answer
A: Hi Joseph, the ADBV is made of silicone. Typically, the silicone material is more flexible and longer lasting than nitrile.
5 years agoHelpful?
Q: I want to order a PH8170 filter but the app requires you to order by Canadian Tire part number. How can I find this info?
5 years ago1 Answer
A: Hi there, the CTC SKU no. for PH8170 is 117-5312, unfortunately, due to our system limitations you will either need to enter in your vehicle details into the Parts Selector tool, or type 117-5312 exactly as shown into the search bar on CT.ca. You will then be able to add this item to your cart without inputting any vehicle details. We apologize for this inconvenience.
5 years agoHelpful?
Q: Fl820s oil filter fit a 4.6 ford 2010 f150
7 years ago1 Answer
A: To answer your question, which equivalent MotoMaster oil filter fits their 4.6 litre Ford 2010 F-150 vehicle. FL820S is the Ford Motorcraft part number. The equivalent FRAM is the PH2 (MPH2 or SKU# 0171738 in MotoMaster). I believe that’s what they’re after. This is the correct filter for the 2010 mod motors.
7 years agoHelpful?
Q: Does it come with a Crush Washer?
7 years ago1 Answer
A: No, the MotoMaster oil filters do not come with a crush washer. However, you are able to purchase a drain plug gasket in store or online, as this will essentially act the same way a crush washer would.
7 years agoHelpful?
Q: Filtration level Anyone know how many microns these filters actually work down to? Looking for info on car filters, not on desiel or bike
7 years ago1 Answer
A: Our MotoMaster oil filters are tested using the industry standard ISO tests to capture over 94% of contaminants 20 microns and larger. They are designed and manufactured to meet or exceed vehicle requirements for OE recommended oil change intervals.
7 years agoHelpful?
1 - 10 of 24 Questions
