McGard 61001 Shank Style Lug Nut Set
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Similar Items
Quebec residents: For information on maintenance and repair click here.
Get It Installed
Available at checkout
Similar Items
Product Details
Chrome plated lug nuts lead a tough life.; Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers.; Not to mention overzealous impact guns and loose fitting lug wrenches.; This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly.; Tough Nuts can take the punishment and keep your wheels looking beautiful.; Tough Nuts are guaranteed for life not to rust, chip or peel.; McGard manufactures lug nuts in the USA to meet or exceed O.E.M.; standards for safety and durability.; Every lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.; McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.; Tough Nuts are designed and built for the real world, because life is tough.; Regular .746 Shank length for use with custom replacement aluminum wheels that are between 11/16 and 7/8 thick at the stud hole and have a flat seat.; Contains polished stainless steel washers.; This product may contain globally sourced materials/components.
McGard 61001 Shank Style Lug Nut Set are fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
McGard's plating process includes three layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
Contains 4 lug nuts and 4 polished stainless steel washers.
Thread size: 7/16" x 20
Colour: Chrome
Finish: Chrome
Hex size: 13/16"
Overall Length: 1.65"
Seat / Style: Shank Seat Nut
Shank Diameter: 0.679"
Shank Length: 0.746"
| Part Number | 61001 |
|---|---|
| Degree of Taper | 0 |
| Finish | Shine |
| Hex Adapter | No |
| Hex Size | 13/16 in / 21 mm |
| Lock Key Included | 4 |
| Lock Type | N/A |
| Locking Lug Length | 1.65 in |
| Lug Diameter | .68 in |
| Lug Type | Hex Regular Shank Nut |
| Material | Steel |
|---|---|
| Open Ended | No |
| Packaging Type | Individually Sold Item (i.e. Bulk) |
| Quantity in Package | 0 |
| Quantity of Locks | 0 |
| Quantity of bolts | 0 |
| Seating | Flat/Mag/Shank |
| Shank Length | .75 in |
| Socket Tool Indicator | No |
| Thread Size | 7/16-20 |
| Valve Stems Included | 0 |
This product carries a manufacturer warranty. Please visit or contact your local Canadian Tire store for details. This product carries a manufacturer warranty. Please visit or contact your local Canadian Tire store for details.
View user manuals and additional product information
Pick Up is free at most stores (some stores require a minimum order value before tax)
Shipping fee is based on size and weight of products and distance from address to store
Same-Day Delivery costs $9.99 per order
Same-Day Delivery and Ship to Home are unavailable for tires and wheels
Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
Some products are non-refundable and non-exchangeable
Special order hard parts and specific application automotive parts must be returned to original store of purchase
The return info outlined above may not apply to the product you are currently viewing. For complete details and exceptions, please refer to our Return Policy.
Compare Similar Products
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Review Highlights
Reviews
Filter Reviews
Great product!
Yes, I recommend this product.
Questions
Q: will the 61001 lug nuts McGard fit my glk350 mercedes benz, and is there anything else i would need.
6 years agoA: GLK350 2013 oem wheels are on the vehicle
6 years agoHelpful?
Q: looking for lug nuts for my 2022 Toyota Venza. Lug nuts would be for my after market winter steel wheels.
3 years agoA: Please contact our customer service dept. for application information at 1-800-444-5847 Mon.-Fri. 8am-5pm EST. We will need to know if your aftermarket winter steel wheels have a cone seat or a flat seat (which would be the same as your OEM wheels if that is the case). Most aftermarket wheel are a cone seat so this is something we need to know before we can provide you any additional information. Please contact us and we will work with you to figure this out. Thank you!
3 years agoHelpful?
Q: what are the washers for? I know stupid question
6 years agoA: This part # is to be used on an aluminum wheel that is between 11/16" and 7/8" thick at the stud hole and have a flat seat. The washers must be put on the lug shank before installed onto the wheel. The shank of the lug nut goes into the wheel to center it and the washer (which should be on the lug nut) applies pressure to clamp the wheel to the axle. Please see the installation / removal instructions from the McGard website for additional information, the link is http://www.mcgard.com/customer-service/installationremoval/#MagShankStyle. If you have additional questions, please contact McGard Customer Service at 1-800-444-5847 Mon. - Fri., 8am - 5pm EST.
6 years agoHelpful?
Q: will these fit my 2013 ford fusion
10 years agoA: I apologize as there was no part number attached to the question. If you have the Original Equipment wheels on the 2013 Ford Fusion and are looking for chrome lug nuts, the correct part number would be 64012 which is a pack of 4 lug nuts. You would need 5 of this part number, 64012 to outfit all the wheels on your vehicle (5-4packs would give you 20 lug nuts as each wheel requires 5 lug nuts). If you want wheel locks as well, you would need part number 24137 (package contains 4 locks & 1 key - 1 lock goes onto each wheel) and would then need to purchase only 4 of part number 64012 to have enough for all 4 wheels.
10 years agoHelpful?
Q: Will this fit a 2015 Rav4 LE FWD if not what would younsuggest.
10 years agoA: McGard does not offer a lug nut to fit the 2015 Rav4 LE FWD OEM (Original Equipment) Wheels. The lock set that will work on the original equipment wheels is part number 21156 or you can go to the Toyota dealer for the OEM set. If you have aftermarket cone seat wheels, McGard does offer a lock set & lug nuts for a aftermarket cone seat wheel.
10 years agoHelpful?
Q: Will these fit a 2012 Hyundai Santa Fe? They will be used with my winter 16" steel rims.
12 years agoA: No
12 years agoHelpful?
Q: What type of locking wheel nuts would I need for my 2012 Hyundai Sonata. Is there a specific part # that I should be buying??
12 years agoA: If you have the original equipment wheels and can see the lug nuts without having to remove a cap or cover, the McGard wheel lock set would be 24157. If the lugs are under a cap or cover, it would be part number 24012. If its aftermarket cone seat wheels that have a small diameter lug hole, you would use 25257. This model takes an M12x1.5 thread cone seat unless it’s a very unique aftermarket wheel. The above are chrome part numbers, these are available in black as well.
12 years agoHelpful?
Q: wil these fit 2005 nissan sentra winter steel rims
12 years agoA: This product has a 7/16-20 thread size and is a shank style lug nut. The 2005 Nissan Sentra has a M12x1.25 thread size and most steel wheels are a cone seat which would make it a McGard Part Number 64003, CTC# 41-7705 lug nut 4/Pack.
12 years agoHelpful?
Q: what are the measurments length diameter thread size
12 years agoA: Product 041-8543 measurements are as follows; Thread size 7/16-20 Length – 1.65” Hex size – 13/16
12 years agoHelpful?
