Mastercraft
Mastercraft Two Height Mitre Saw Stand
#055-6822-8
$99.99
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Similar Items
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
Collapsible mitre saw stand
Has an overall dimension of 23"x25"x25"
Ideal two position heights: 22-5/8" for table saw and 26-1/2" for Mitre Saw
6" rubber wheels make for easy mobility
150 lb. weight capacity
Warranty
- This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | Currently Viewing | |||||
| Ratings | ||||||
| Assembled Height (cm) | 81.28 cm | 82.00 cm | 82.55 cm | 82.00 cm | ||
| Assembled Height (ft) | 2.67 ft | 2.69 ft | 2.71 ft | 2.69 ft | ||
| Assembled Height (in) | 32.00 in | 32.28 in | 32.50 in | 32.28 in |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Review Highlights
List of Pros Highlights
Pros
List of Cons Highlights
Cons
Reviews
Filter Reviews
- sawing
- purchase
- price
- mounting
- portable
- instructions
- setup
- quality
Rating
Locale
1 to 5 of 29 Reviews
1 – 5 of 29 Reviews
Most Recent
3 out of 5 stars.
Good Stand for the most part
11 years ago
Bought this on sale along with the 12" Dual Bevel Mitre Saw. The ad said they went together and so did the sales person.
I built the stand as per the instructions and only when I got to the "Mount your saw" section did the instructions states, "only for 10" Saws". I looked all over the box and paperwork thinking I had missed something. Went back to CT and talked with 2 sales ppl there. The last one said that she had bought one a few years back and had the same problem but her husband did some mods to to the stand to make it work.
So I went home and made some mods and now my saw is mounted and mobile.
I wouldn't recommend this to a friend without telling them what I went through. However, having the saw mounted and mobile is exactly what I wanted.
No, I do not recommend this product.
Helpful?
4 out of 5 stars.
Needed some fine tuning but it works now.
11 years ago
Bought this to go with the Dual Bevel 10 inch compound Mitre saw. Both are Mastercraft brand, yet the stand doesn't fit with the saw.
Very strange. there's an adjustable track with the bots in it. I reversed that and it works with my saw. I needed to use my own bolts to have bolts long enough to secure my saw.
All said and done, there was a little hassle setting it up, but now that I've got my mitre saw mounted, it's awesome. I find the height sufficient, and it's sturdy.
the balance is also nice, and it's easy to move.
I'm quite pleased with this purchase.
Yes, I recommend this product.
Helpful?
5 out of 5 stars.
Works Great
11 years ago
Great buy when on sale. Sturdy enough for my tablesaw and radial saw. Purchasing another soon for the scroll saw I'm also purchasing.
Yes, I recommend this product.
Helpful?
3 out of 5 stars.
Needs signifigant fine tuning to use
11 years ago
I found that my saw needed longer bolts and the template was too small so I was forced to enlarge the holes on the base of my saw to fit the stand, as well, no corner hangers were in place to hold the dust bag, It works well after I got it attached though.
Very sturdy
No, I do not recommend this product.
Helpful?
4 out of 5 stars.
Great price on sale.
12 years ago
georgeinmontreal states that his Mastercraft Dual-Bevel Sliding Mitre Saw did not fit this stand, my Maximum, Compound did ? Two mounting bolts were too short to use but stand adjustments were well designed to fit a range of saws. Wheel smell faded, at 5'11" I bend when sawing and for the sale price for a DIY stand I could not have made it myself for less. After reading many negative reviews I got more than I expected.
Yes, I recommend this product.
Helpful?
1 – 5 of 29 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 9 of 9 Questions
Most helpful answers
Q: Is there any way to make this stand fit a 12" mitre saw I purchased this stand and it is what I was looking for,but when I tried to hook my 12" mitre saw to it the brackets were about 2 inches too short.
16 years ago6 Answers
A: I have a 12" slider and the holes were too far apart to fit stand. I purchased a piece of plywood and mounted to stand. Before I bolted it down I installed 2" carriage bolts measured to fit saw holes. Seems to work fine.
12 years agoHelpful?
Q: Will the Mastercraft Collapsible Mitre Saw Stand #55-6822-8 advertised on page 17 0f the recent flyer fit a 12" Mastercraft Saw - holes 16 3/4 " apart
12 years ago3 Answers
A: I simply extended the holes on my saw base with a serpentine bit, 1/4-1/2 inch to fit, it was plastic, so no prob, longer bolts and it fit. Poor engineering on the stand mating base but for 50.00 its a bargain.
11 years agoHelpful?
Q: Will this collapse flat without having to disassemble it? So it could be stored against a wall or under a table for example.
12 years ago3 Answers
A: Yes it will collapse. Just be mindful of weight added to stand.
12 years agoHelpful?
Q: will this stand fit a mastercraft tablesaw?
17 years ago2 Answers
A: Yes it will fit most 10" table saws made today.
14 years agoHelpful?
Q: ou peut on trouver le manuel utilisation merci
4 years ago1 Answer
- Translate with Google
A: Malheureusement, l'acheteur ne dispose pas d'un manuel pour ce produit.
4 years agoHelpful?
Q: Can I get a manual for assembly please? I purchased one that was put together wrong. I've looked for a pdf but I haven't found this exact model Thank you
7 years ago1 Answer
A: Please call our Customer Service to have a copy of the manual emailed to you by calling: 1-800-387-8803
7 years agoHelpful?
Q: can stand be collapsed & stored on end with saw mounted? May seem a silly question, but can table be collapsed with the saw mounted to it, and then the whole thing stood on end for storage?
11 years ago1 Answer
A: Although the stand can be transported with the saw still attached it is not recommended you store your saw attached to the stand as it might tip or fall causing damage to power tool or injury.
11 years agoHelpful?
Q: l'article est-il universel? Article #55-6822-8 est-ce universel pour toutes les scies onglet (Dewall)
12 years ago1 Answer
- Translate with Google
A: Les dimensions de montage sont les suivantes : Longeur - 14 1/2" to 18 7/8" Largeur - 4 3/8" to 16" En autant que les trous de montage soient de ces dimensions, il ne devrait pas y avoir de problèmes.
12 years agoHelpful?
Q: est-ce possible de poser un banc de scie sur ce support à scie à onglet ?
13 years ago1 Answer
- Translate with Google
A: Les dimensions pour poser un outil sur ce support sont : Longueur:14 1/2" à 18 7/8" Largeur:4 3/8" à 16" En autant que les trous de pose sont dans ces dimensions, il devrait y avoir aucun problèmes.
13 years agoHelpful?
