Mastercraft
Mastercraft 4-in Drill Press Vise, for Dry Use
#055-5906-6
$44.99
Exclusive
Buy Online :
- FREEAvailable
- Available
- Available
Pick up at Leduc, AB
Get it Today !4 In Stock
Pick up available 09:00 a.m., Dec 19
Quantity updated to 1
Also Find It in Store:Aisle 21
Only 4 left
at Leduc, AB
Add to Registry
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
The Mastercraft 4-in Drill Press Vise for Dry Use is a practical tool to add to your toolkit. With sturdy teeth that can hold on and grip a variety of materials of different shapes, this jet drill press vise makes life easier. It features a swivel handle crank to easily adjust the jaws as you go about your work. This jaws open up to 4", along with elongated holes that make fastening its clamp to the worktable of the drill press far more convenient.
This Mastercraft 4-in Drill Press Vise, for Dry Use features durable teeth that hold and grip various shapes of material when drilling
Swivel handle crank for easy jaw adjustment
Jaws open to 4" (10.16cm)
Elongated holes for fastening clamp to worktable of drill press
9 x 7 x 2½" d (22.9 x 17.8 x 6.4cm d)
6½ lbs (2.951kg)
| Part Number | 197998 |
|---|---|
| Tool Use | No Tool |
| Product Use(s) | Dry Use |
| Abrasive Type | Sanding Block |
| Arbor Size | Not Applicable |
| Advanced Features | No Advanced Features |
| Consumer Pack Size | 1 |
| Maximum Speed (rpm) | 0 r/min |
| Primary Material | Steel |
| Product Diameter (in) | 0.00 in |
| Product Height (ft) | 0.21 ft |
|---|---|
| Product Height (in) | 2.50 in |
| Product Length (ft) | 0.75 ft |
| Product Length (in) | 9.00 in |
| Product Thickness (in) | 0.00 in |
| Product Weight (kg) | 2.95 kg |
| Product Weight (lb) | 6.50 lb |
| Product Width (in) | 7.00 in |
| Product Width (mm) | 177.80 mm |
Warranty
- This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | Currently Viewing | |||||
| Ratings | ||||||
| Tool Use | No Tool | |||||
| Product Use(s) | Dry Use | |||||
| Abrasive Type | Sanding Block |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Frequently Bought Together
+++
$530.46$590.46
Review Highlights
Reviews
Filter Reviews
- drilling
- quality
- purchase
- price
- functional
- mounting
- holding
- sturdy
Rating
Locale
1 to 5 of 30 Reviews
1 – 5 of 30 Reviews
Most Recent
3 out of 5 stars.
Mounting hardware should be included
3 months ago
It works fine but doesn’t come with mounting hardware. Positions are limited and requires constant repositioning when drilling more than 1 hole.
Helpful?
5 out of 5 stars.
Works as advertised.
4 months ago
Good little vise. Holds securely
Helpful?
2 out of 5 stars.
Rough around the edges
11 months ago
Quality is pretty rough. Edges were razor sharp, lots of drips and runs in the paint, slag in the casting, jaws weren't quite parallel, and all the fasteners need some thread locker added to them. If you're willing to disassemble, and spend some time with a file it can be made serviceable.
Helpful?
Response from Canadian Tire:
11 months ago
Customer Service
Thank you for bringing this to our attention. We apologize for the poor quality experience you've had with the MASTERCRAFT Drill Press Vise 4". We understand your frustration with the sharp edges, paint issues, casting slag, jaws misalignment, and fastener concerns. If you haven't already, we recommend taking the vise to the nearest store for further assistance. They may be able to help resolve the issues you've encountered. If you have any further questions or need more information, please feel free to call our customer support at 1-800-689-9928. Please note that if a considerable amount of time has passed since your purchase, the product's warranty may have expired.
4 out of 5 stars.
It's okay, worth buying
a year ago
It's not the best quality, but for home garage use it's fine.
Helpful?
4 out of 5 stars.
Étau pour perceuse à colonne
2 years ago
Étau pour perceuse de bonne qualité et en fonte.
Je trouve dommage que l'étau n'ai pas d'écrou pour l'installation.
Comme tout les produits Canadian Tire, attendez un rabais avant d'acheter.
Translate with GoogleHelpful?
1 – 5 of 30 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Most helpful answers
Q: What is the spacing of the mounting slots?
4 years ago3 Answers
A: If you have a small bench top drill holes will fit the table of the drill press. The spacing is 5 inches or 140 mm
4 years agoHelpful?
Q: What is the vice made out of? Cast iron?
16 years ago2 Answers
A: It is. It has a mass of about 2.5kg and its sturdy.
15 years agoHelpful?
Q: Drill press 055-6798-6, Vice 055-5906-6 I just bought the Mastercraft drill press and to go with it the Mastercraft drill press vice. The slots on the vice DO NOT line up with the slots on the drill press table! You only sell 1 press & 1 vice.
2 years ago1 Answer
A: Thank you for the feedback. We will take this away and discuss with the vendors
2 years agoHelpful?
Q: I just bought the Mastercraft drill press and to go with it the Mastercraft drill press vice. The slots on the vice DO NOT line up with the slots on the drill press table! The only way to get partial line up is hang 50% off the table
2 years ago1 Answer
A: Please provide the product number of the Mastercraft drill press in another question so we can better look into the problem
2 years agoHelpful?
Q: Hello, thanks for your time, Is the given vise compatibility with Mastercraft 10'' drill press
3 years ago1 Answer
A: Hello Pranjal, Thank you for your inquiry. Yes, the 4” MC Drill Press Vise will fit the MC 10” Drill Press. There are various methods of attaching the 4” drill press vise to the drill press table. Using hex head bolts & nuts 1/2" x 2-1/2” (x2), ½” locking washer(x2) and ½” flat washer(x4) is the most economical method. The most important is to position the centre of the workpiece while it is secured to the 4” drill vise first. Then secure the drill press vise to the drill press table using a minimum two bolts. If you prefer to use c-clamps, then a minimum of two sides of the drill press vise should be clamped to the table, ensuring that the clamp does not interfere with the drill press as you move the drill down towards the work piece. If you are drilling in metal, ensure to set the drill press to a lower RPM and using cutting fluid to extend the life of your drill bit. Please see attached PDF for reference
3 years agoHelpful?
Q: What is the length of the jaws? (Not how far it opens, I know that's 4 inches) I need to know what length of jaw pads I should get for it.
3 years ago1 Answer
A: Hello Grammamom73, Thank you for contacting us. The jaw pad size that you would require is 4” (100mm) wide x 3/4" (19mm) tall should fit.
3 years agoHelpful?
Q: Does it it the mastercraft 10 in drill press?
12 years ago1 Answer
A: We are unable to answer your question without more information. Please clarify your question.
12 years agoHelpful?
Q: Does this Come with Bolts? Does this come with the necissary bolts and nuts or wingnuts to mount this to the Drill press?
15 years ago1 Answer
A: No, it does not, as there are too many different thicknesses of drill press work tables on the market.
15 years agoHelpful?
