Mastercraft
Mastercraft 15 Amp Adjustable Planer with Stand, 12-1/2-in
#055-5503-4
$529.99
Exclusive
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Similar Items
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
With a graduated depth gauge and side carrying handles, this Mastercraft 15 Amp Adjustable Planer will fit right at home in your workshop or garage. Combining an average cuts-per-minute of 18,000 with an impressive 9,000 RPM of speed, this steel planer will get accurate passes every time. The planer comes with everything you need, including a blade wrench, hex key and crank handle, plus an adjustable cutterhead and dust chute.
The Mastercraft 15 Amp Adjustable Planer provides 18,000 cuts per minute for accurate passes
Cuts per minute: 18,000, speed: 9,000 rpm
Graduated depth gauge, side carrying handles
Adjustable cutterhead, dust chute, blade storage
Includes blade wrench, hex key and crank handle
Replacement planer blades are 55-5506
Side carrying handles
Adjustable cutter head allows for a variety of wood thicknesses
Dust chute and hood
Blade storage
Includes blade wrench, hex key and crank handle
Replacement planer blades (sold separately): Mastercraft 12-1/2-in Replacement Planer Blades (CT #055-5506)
| Part Number | MB1931B |
|---|---|
| Accessories List | Dust Bag |
| Blade Material | High-Speed Steel |
| Case Type | Not Included |
| Cord Gauge (ga) | 14ga |
| Cord Length (ft) | 6.0 ft |
| Cord Length (m) | 1.83 m |
| Cord Type | Corded |
| Dust Collection Output Diameter (cm) | 10.20 cm |
| Dust Collection Output Diameter (in) | 4 in |
| Dust Collection Output Diameter (mm) | 102.00 mm |
|---|---|
| Dust Collection Type | Dust Box |
| Motor Type | Brushed |
| No-Load Speed Range (rpm) | 8100 - 9900 |
| Number of Accessories | 1 |
| Package Depth (cm) | 69.50 cm |
| Package Depth (in) | 27.36 in |
| Package Height (cm) | 50.00 cm |
| Package Height (in) | 19.69 in |
| Package Weight (kg) | 42.00 kg |
| Package Weight (lb) | 92.59 lb |
| Package Width (cm) | 37.50 cm |
| Package Width (in) | 14.76 in |
| Planing Depth (cm) | 0 1/4 cm |
| Planing Depth (in) | 0 1/8 in |
| Planing Depth (mm) | 0 1/8 mm |
| Product Model Number | MB1931B |
| Rabbeting Depth (cm) | 0 cm |
| Rabbeting Depth (in) | 0 in |
| Rabbeting Depth (mm) | 0 mm |
Warranty
- 3 yr limited repair. For customer support, call Mastercraft Hotline at 1-800-689-9928
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | Currently Viewing | |||||
| Ratings | ||||||
| Accessories List | Dust Bag | Wrench | No Accessories Included | Wrench, Dust Bag | Wrench | |
| Blade Material | High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide-Tipped | Carbide-Tipped | |
| Case Type | Not Included | Hard Case | Not Included | Not Included | Not Included |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Review Highlights
List of Pros Highlights
Pros
List of Cons Highlights
Cons
Reviews
Customer Images and Videos
Filter Reviews
- purchase
- price
- quality
- satisfaction
- thickness
- small
- value
- setup
Rating
Locale
1 to 5 of 147 Reviews
1 – 5 of 147 Reviews
Most Recent
1 out of 5 stars.
Smoke from Motor
a year ago
Second time I used it the motor caught fire. Smoke was pouring out. It wasn't even cutting any wood at the time.
Unfortunately it was a few months out of warranty and Canadian Tire can't do anything for me.
No, I do not recommend this product.
Helpful?
Response from Canadian Tire:
a year ago
Ask And Answer
Thank you for your review, we will be reaching out to you.
1 out of 5 stars.
No worth the money
2 years ago
Bought this product and before the 30 day warranty was up, it would not run. Soon as you turned it on it blew the breaker. Had it been over 30 days, I would have had to drive to Brighton to get it fixed. Cheaply made and not worth to money
No, I do not recommend this product.
Helpful?
5 out of 5 stars.
great planner
2 years ago
this planner works better than I hoped for used to plane rough oak boards and the finished results were amazing no need for sanding very happy with my purchase highly recommend this planner.
Yes, I recommend this product.
Helpful?
5 out of 5 stars.
Great for the money
2 years ago
Picked this up a week ago and have run close to 50 or so boards through it. Cuts great and leaves a buttery smooth finish after. The only issue I had was that it won’t fold all the way on one side because of the power switch so I have to use a bungee cord to store it.
Yes, I recommend this product.
Helpful?
5 out of 5 stars.
Super achat
3 years ago
Fait la job super bon achat je le recommande pratique pour petit travaux
Translate with GoogleYes, I recommend this product.
Helpful?
1 – 5 of 147 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 94 Questions
Most helpful answers
Q: Lorsqu'on zoom la photo du planeur on voit bien sur l'étiquette 10 000 tours à vide. Le site indique 9000 tours et dans les spécification 8100 ? 9900 ? tours. Donc c'est imprécis! Donc merci de corriger!
3 years ago4 Answers
- Translate with Google
A: Les révolutions devraient être de 10000, nous allons mettre à jour le système en conséquence.
3 years agoHelpful?
Q: Is it possible to use the planer without the stand? I would like to store it out of the way and pull it out to use on a benchtop when needed.
4 years ago4 Answers
A: Hello! Thank you for your question. While this unit can be used without a stand, we recommend that it's always best for the planer to be properly secured to a sturdy, stable working surface. Please visit your user manual for further guidance.
4 years agoHelpful?
Q: I need a belt for this. Whats the part # for it? You list the blades, but no belt.
4 years ago3 Answers
A: My belt lasted only a few hours. The part number is 4M2840 but I couldn't find it.
4 years agoHelpful?
Q: I am thinking of buying this item or should i just bit yhe bullet and buy the dw735
4 years ago3 Answers
A: If your not going to run a production line of wood through it this is a great option. Just make sure everything is level and true and it is a nice working machine and you save money in the end. I got mine on sale at about 30% off so even better.
4 years agoHelpful?
Q: How do you eliminate SNIPE? This unit has bad outfeed snipe, how does one fix it?
15 years ago3 Answers
A: Run a scrap of wood the same thickness as the board you are planing beside the last few inches of your board. The rollers should not drop and you should be snipe free.
11 years agoHelpful?
Q: cette rabotteuse à t`elle 3 couteaux?
16 years ago3 Answers
- Translate with Google
A: non 2 couteux
15 years agoHelpful?
Q: I have a 12.5 inch planer that cuts into the end of the board when it is finishing the cut even though the table is level and the board is supported. How can I stop this from happening?
3 years ago2 Answers
A: This planer does cause “snipe”. It can be reduced by feeding multiple boards through together, but not eliminated completely in my experience.
3 years agoHelpful?
Q: How thick of a board will this do?
4 years ago2 Answers
A: Just over 7” thick (Hint: look at the scale in the picture)
4 years agoHelpful?
Q: What is the thinnest material this will work on?
4 years ago2 Answers
A: The thinnest is not my expertise. I found this planner to very robust and able to do the work. I planed 20+ rough cedar planks from 100 year old barn. I made some 2 X 8, 2X 6, and my pride and joy is a 13 ft piece 3 Inches by 10+. I think this machine can do what you want.
4 years agoHelpful?
Q: HI when the cutter blades go dull ,can they be sharpened,or do I replace them.How do I take them out of the planer TKS
4 years ago2 Answers
A: You have to replace them. You need 3 different sized Allen keys and a 3/8 wrench Take off dust collector, remove top and side panels, crank travelling portion of the tool all the way to the top and spin your blades so you can see the set screws. At this point you go on Google and watch 1 if many videos on replacing blades on MasterCraft planer
4 years agoHelpful?
1 - 10 of 94 Questions
