CANADA'S STORE

Credit Offered* Learn More

Support Order Status
FR
Mastercraft

Flotec Deep Well Pump, 10G 1/2 HP 3W

#062-3540-8
Flotec Deep Well Pump, 10G 1/2 HP 3W
$499.99
Exclusive

Unfortunately, this product is discontinued in your selected store and nearby stores.

You may be interested in these similar products shown below.

Quebec residents: For information on maintenance and repair click here.

Mastercraft
Mastercraft

Flotec Deep Well Pump, 10G 1/2 HP 3W

$499.99

Product Details

  • Capable of pumping 10 gallons per minute of water

  • 1/2 HP motor

  • 3-wire system includes separate control box for easy service

  • Includes built-in check valve

  • Patented floating stack design for sand resistance

  • Model No. FP3212

Warranty
  • This product carries a 3 year exchange warranty redeemable at any Canadian Tire store.
Online Ordering
  • Pick Up is free at most stores (some stores require a minimum order value before tax)
  • Shipping fee is based on size and weight of products and distance from address to store
  • Same-Day Delivery costs $9.99 per order
  • Online Ordering Information
Returns
  • Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
  • Some products are non-refundable and non-exchangeable
  • The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.

Compare Similar Products

Only Show Differences
Ratings
Flow Rate (l/min)59.93 l/min24.60 l/min378.53 l/min82.00 l/min
Maximum Operating Temperature (°C)40.00 °C40.00 °C40.00 °C25.00 °C
Power Source(s)ElectricElectricElectricElectric

Reviews

Rating Snapshot

Select a row below to filter reviews.
0 reviews with 5 stars.
0 reviews with 4 stars.
0 reviews with 3 stars.
1 review with 2 stars.
0 reviews with 1 star.

Overall Rating

2.0

Review this product

Select to rate the item with 1 star. This action will open submission form.
Select to rate the item with 2 stars. This action will open submission form.
Select to rate the item with 3 stars. This action will open submission form.
Select to rate the item with 4 stars. This action will open submission form.
Select to rate the item with 5 stars. This action will open submission form.
Adding a review will require a valid email for verification

    Filter Reviews

    • draining
    • installation
    • opening
    • purchase
    1 to 1 of 1 Review
    1 – 1 of 1 Review

    Piece of Junk

    7 years ago
    Bought last week. First thing the control box blew up. Best way I can describe it. Smoke everywhere. CDN Tire does not sell control boxes separately so they opened a new kit (pump and box) and replaced our box. Got the electrician to install it and nothing. not a sound. We pulled the pump. AGAIN. Did the old put the pump in a barrel of water and test it. The water drained out of the pump. Bad foot valve. Anyone that has ever done this will relate. Pulling a pump is hard work. Doing it more than once just because the pump is no good is just maddening.
    Helpful?

    Questions

    1 - 7 of 7 Questions

    Q: What is the PSI out put of this pump

    7 years ago
    1 Answer
    • A: PSI depends on - feet of head (the further you are away from the discharge of the pump the lower the PSI and GPH) per the chart below: - diameter of the pipe used - cut on/out of the pressure switch Please see attached chart.

      7 years ago
      • Answer photo 1.
      Helpful?

    Q: quel est le poids de la pompe #62-3540-8 c'est une pompe submersible Flotec 10 gallons 1/2HP 3W et je veux savoir son poids. C'est surement indiqué sur l'emballage. Merci

    9 years ago
    Translate with Google
    1 Answer
    • A: La pompe pèse environ 25 lbs.

      9 years ago
      Helpful?
      Translate with Google

    Q: What is the recommended (Amp) braker switch to use for this Pump?. 0-62-3540-8 Sub DW PMP with CTRL box. the sticker in the motor has 4 AMPS to a Maximun of 5.7 AMPS. I was told to use a 10 AMP Switch braker for this Pump. is this braker the right one?

    9 years ago
    1 Answer
    • A: The recommended breaker size for this pump is a 15 amp, 230v breaker.

      9 years ago
      Helpful?

    Q: What is the diameter of the input and output? What is the smallest diameter the water flows through in this pump?

    10 years ago
    1 Answer
    • A: The 4” submersible well pumps have a diameter of about 3.875” (3- 7/8”). DISCHARGE PIPE SIZE: 1-1/4" NPT

      10 years ago
      Helpful?

    Q: Does this pump require a large head to work well? (will 10 feet or less work)

    10 years ago
    1 Answer
    • A: Assuming we are talking about a well close to the surface with the depth of 10’ or less is not recommended for a couple of reasons: 1. The entire pump must be submerged all the time. To do this, it has to be placed 1’ above the bottom of the well to minimize the probability of it coming out of the water. When installing the pump so close to the bottom there is a high risk of sucking in debris which is a problem for the pump and quality of water you will get at the surface. 2. Remember, the depth below the pump is 1’, the length of the pump is 3’ so that only leaves 6’ of water above the pump which is not much at all. Since we cannot guarantee the speed of the well’s regeneration there is a possibility that the well may run dry and thus burn out the pump. We would suggest a customer use a shallow well jet pump as a better option for this scenario.

      10 years ago
      Helpful?

    Q: Does this pump come complete with the control box FP217-810?

    11 years ago
    1 Answer
    • A: We did a running change on this SKU from Flotec to Mastercraft a while back, you may still find older stock in the stores. All SKUs under this product number be it Mastercraft or Flotec, should have a control box but we cannot specifically identify the control box used on the Flotec version.

      11 years ago
      Helpful?

    Q: What is the voltage and how deep will this pump work?

    16 years ago
    1 Answer
    • A: It is a 230 volts 1/2HP, 10GPM 3-wire 4" submersible well pump. It is for 4" inside diameter or larger wells. Pumps from depths of 150ft Floating stack design for sand resistance and reduced sand locking Corrosion-resistant stainless steel pump and motor housing.

      11 years ago
      Helpful?
    Top