E2
E2 1 In 2 Out Distribution Block
#035-0084-8
$19.99
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Similar Items
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
- Features
- Specifications
- Resources
E2 1 In 2 Out Distribution Block is a 9.5 mm to 6.5 mm quad distribution block
Features 1-4 gauge input and 4-8 gauge outputs
Platinum plated for best conductivity and most durable finish
Easily mounts to vehicle surface
One 2/4 gauge input
Holds 2 AGU fuses
Part #EDBF
| Part Number | EDBF |
|---|---|
| Advanced Features | No Advanced Features |
| Assembled Height (cm) | 15.08 cm |
| Assembled Height (ft) | 0.49 ft |
| Assembled Height (in) | 5.94 in |
| Assembled Length (cm) | 11.27 cm |
| Assembled Length (ft) | 0.37 ft |
| Assembled Length (in) | 4.44 in |
| Assembled Weight (kg) | 0.11 kg |
| Assembled Weight (lb) | 0.24 lb |
| Assembled Width (cm) | 2.70 cm |
|---|---|
| Assembled Width (in) | 1.06 in |
| Assembled Width (mm) | 27.00 mm |
| Colour | Black |
| Electronic Accessory Type | Cable Managers/Ties |
| Non-toxic When Used as Intended | Yes |
| Number of Pieces | 1 |
| Package Depth (cm) | 11.27 cm |
| Package Depth (in) | 4.44 in |
| Package Height (cm) | 15.08 cm |
| Package Height (in) | 5.94 in |
| Package Weight (kg) | 0.11 kg |
| Package Weight (lb) | 0.25 lb |
| Package Width (cm) | 2.70 cm |
| Package Width (in) | 1.06 in |
| Primary Material | Other |
| Theme | No Theme |
Warranty
This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Compare Similar Products
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Review Highlights
Reviews
Filter Reviews
Rating
Locale
1 to 1 of 1 Review
1 – 1 of 1 Review
Most Recent
3 out of 5 stars.
Not as advertised
5 years ago
Splitter is actually 4ga in, 8ga out. Description should be updated.
Yes, I recommend this product.
Helpful?
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 2 of 2 Questions
Most helpful answers
Q: Do I need to put in or use the internal fuses or can I just put one wire in and two out by themselves. I will already be running one fuse bye the batteries an a fuse on each output from the block.
6 years ago1 Answer
A: The 0350084P (E2DB) does not accept any fuses. It can accept 1 input and provides 2 outputs. It would be perfectly fine to use if you are already fusing the input coming from the battery and adding in your own fuses on each output from the distribution block.
6 years agoHelpful?
Q: so does this have 2 or 4 outputs and are they 4 or 8 gauge?
9 years ago1 Answer
A: 1 - 4 gauge input and 4 - 8 gauge outputs.
9 years agoHelpful?
