Danze Sheridan
Danze Sheridan Three Handle Tub and Shower Faucet
#063-3955-0
$159.99
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Available Alternative Items
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
Three handle tub and shower faucet, "teapot" style
Porcelain lever handle
1-setting showerhead
Chrome finish
Drip-free washerless cartridge
CSA approved
Warranty:
- This product carries a special warranty. Please see your local Canadian Tire store for details.
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | Currently Viewing | |||||
| Ratings | ||||||
| Faucet Type | Tub/Shower Faucet | Tub/Shower Faucet | Tub/Shower Faucet | Tub/Shower Faucet | ||
| Plumbing Finish | Brushed Nickel | Chrome | Chrome | Black | ||
| Design Style | Modern | Classic | Modern | Modern |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Review Highlights
Reviews
Filter Reviews
- purchase
- quality
- turning
- installation
- tearing
- price
- cutting
- chrome
Rating
Locale
1 to 5 of 9 Reviews
1 – 5 of 9 Reviews
Most Recent
1 out of 5 stars.
Garbage
3 years ago
cartridges always stripping and busting, screws bending, handles busting. Have to contact support@globalunion.com for any replacement parts. Every 6 months busting. Good luck trying to find anything that fits the valves behind wall. DO NOT GET
Helpful?
5 out of 5 stars.
better than the ratings
8 years ago
If you are replacing an older tub set that clamps the fixture from the tub side, this unit doesn't work that way. You clamp it from the stud side and the posts simply push through the old holes. The decorative flanges just push onto the exposed hot/cold/shower posts. The only clamping available is with the tub spigot, make sure that you buy a nipple short enough. I see quite a few negative reviews from people who really shouldn't be doing it themselves. A shame.
Yes, I recommend this product.
Helpful?
1 out of 5 stars.
returning these
12 years ago
bought these to install in our bathroom as my wife liked the look of them. After tearing out the wall and buying a new tub surround I got looking at the taps and realized they would not go threw the drywall. a rectangular hole would have to be cut as the threads for the chrome covers is less then 1/4 inch. even with just the surround thickness it only gives two turns to hold the escutcheon on. Furthermore the center sleeve threads are not defective and will not hold the diverter tight. Having so little thread on these taps is just bad designing.
No, I do not recommend this product.
Helpful?
1 out of 5 stars.
requires frequent repair
14 years ago
This set came with the house we purchased and I've had to change the plastic cartridges many times. My current problem is that the diverter is sending water into the wall behind the fixtures. !!! The black plastic cap that sits within the brass plumbing is wrecked. A trip to my local store netted nothing (I was slightly surprised as I had to make this repair about five years ago.) Because it's a Danze product, CTC is the only place one can hope to get replacement parts. I will check at a different store tomorrow, but if it really isn't available my options are to purchase an entirely different faucet/shower set and have to tear out that portion of the shower wall, or spend $150 on this very set just to get the black plastic piece, but avoid tearing apart the wall.
No, I do not recommend this product.
Helpful?
2 out of 5 stars.
Quality not there
15 years ago
Don't recommend these are the handles on ours are falling apart.
No, I do not recommend this product.
Helpful?
1 – 5 of 9 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 7 of 7 Questions
Most helpful answers
Q: size "centre to centre" is not listed. i need 11 inch centre. size is missing. centre to centre is the usual mode.
12 years ago2 Answers
A: these have an 8 inch center that is the standard for most taps. I had the same as you before and could not find anything to fit.
12 years agoHelpful?
Q: Is the shower/tub handle included? Product # 63-3955-0 Danze Tub & Shower The photo shows the shower/tub handle, but the description or features do not indicate the shower/tub handle, being provided. Thank you in advance.
16 years ago2 Answers
A: Yes, but being very soft plastic where it connects, it doesn't stay on for long without stripping and turning round and round.
16 years agoHelpful?
Q: Are these taps temperature controlled or pressure balanced?
11 years ago1 Answer
A: All the three handle tub shower handles are not temperature controlled or pressure balanced, due to the fact there are 2 handles to control water flow.
11 years agoHelpful?
Q: Does CTC have Danze replacement diverter cartridges? The product model was Cleopatra (something like the present Bannockburn model on Danze website). See photo of my existing installation attached.
11 years ago1 Answer
A: Canadian Tire may have replacement parts, However you may also contact the manufacture for parts at 1-800-487-8370.
11 years agoHelpful?
Q: Does CTC have Danze replacement diverter cartridges? Purchased from CTC a number of years ago, I have Danze 3-handle wall mount tub and shower faucets. I need a diverter replacement cartridge. Can I find same at CTC or do I have to contact Danze in the USA (seems not in Canada)?
11 years ago1 Answer
A: Please call 1 800 487-8372 for assistance.
11 years agoHelpful?
Q: Est-ce garanti à vie et sinon combien de temps?
14 years ago1 Answer
- Translate with Google
A: Garantie à vie limitée contre les défauts de matériaux, de fabrication et de fini, dans des conditions normales d'utilisation à des fins non commerciales avec votre preuve d'achat.
13 years agoHelpful?
Q: Les mesures entre les manettes et aussi le robinet En d'autres mots je veux m'assurer si je peux remplacer mon ancienne robinetterie sans faire de nouveaux trous.
17 years ago1 Answer
- Translate with Google
A: Les poignées sont de 8" à part. Voir le schéma ci-dessous.
13 years agoHelpful?
