This paragraph should be hidden.
Pick up available 10:30 a.m., Oct 08
Only 7 left
BrassCraft 1/2 in. Nom Comp Inlet x 3/8 in. OD Comp Outlet 1/4-Turn Angle Ball Stop controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a 90 degree turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home.
BrassCraft Angle Valve is intended for use in potable water distribution systems
1/2-in nominal compression x 3/8-in OD compression angle valve
On/off flow control with a 90 degree (1/4) turn of the valve handle
Finish: Chrome
Part Number | KTCR19X CPEF |
---|---|
Valve Type | Ball |
Connection Type | Compression |
Primary Material | Brass |
Primary Colour | Silver |
Pipe Type Compatibility | Copper |
Maximum Pressure (psi) | 125 lb/in² |
Number of Pieces | 1 |
Advanced Features | No Advanced Features |
Certifications | IAPMO Certified, NSF Certified, ANSI Listed |
Assembled Height (cm) | 2.54 cm |
---|---|
Assembled Height (in) | 1.00 in |
Assembled Length (cm) | 16.51 cm |
Assembled Length (in) | 6.50 in |
Assembled Weight (kg) | 0.44 kg |
Assembled Weight (lb) | 0.97 lb |
Assembled Width (cm) | 9.53 cm |
Assembled Width (in) | 3.75 in |
Inlet Size (in) | 0.50 in |
Inlet Size (mm) | 12.70 mm |
Outlet Size (in) | 0.37 in |
Outlet Size (mm) | 9.40 mm |
Only Show Differences | |||||
Ratings | |||||
Valve Type | Globe | Ball | Gate | Globe | |
Connection Type | Flare | Threaded | Flare | Flare | |
Primary Material | Brass | Brass | Brass | Brass |
$143.95