Credit Offered* Learn More
10 MIN | EASY | 8 STEPS
WHAT YOU'LL NEED
Start by protecting the bath tub or shower floor with an old towel or sheet.
Unscrew the old showerhead.
Clean the threads.
Use your fingers to remove any old plumber's tape - and then use an old toothbrush or soft wire brush to clean the threads.
Wrap threads with plumber's tape.
Take your new showerhead out of its packaging.
You're more than halfway there!
Screw on your new showerhead.
Remove the towel or sheet you put on the floor.
Turn the water on, test the flow and check for leaks.
..and you're done!