CANADA'S STORE

Credit Offered* Learn More

Support Order Status
FR
Rust-Oleum

Rock Solid Floors Polyurea Grey Garage Coat Kit, 3.75 kg

#048-9750-8
$149.99

Unfortunately, this product is discontinued in your selected store and nearby stores.

You may be interested in these similar products shown below.

Quebec residents: For information on maintenance and repair click here.

Rust-Oleum
Rust-Oleum

Rock Solid Floors Polyurea Grey Garage Coat Kit, 3.75 kg

$149.99

Product Details

  • Rock Solid Floors Polyurea Garage Coat Kit is industrial grade floor coating system that requires no mixing or measuring, just shake, pour and roll

  • Dries quickly, walk on in 4-8 hours, and drive on in 24 hours

  • Includes instructional booklet, Safe-Etch Solution™, foam roller, garage coat pouch, decorative chip and grey colour tint

  • 3.75 kg

Part Number 282151
Paint Type Exterior Floor/Masonry Paint
Job Type(s) Porch/Floor
Paint Finish Flat
Paint Can Size 946 mL (1 quart)
Paint Maximum Coverage Area (sq ft) 43 ft²
Paint Maximum Coverage Area (sq m) 4 m²
Paint VOC Level Low VOC
Warranty
  • This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Online Ordering
  • Pick Up is free at most stores (some stores require a minimum order value before tax)
  • Shipping fee is based on size and weight of products and distance from address to store
  • Same-Day Delivery costs $9.99 per order
  • Online Ordering Information
Returns
  • Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
  • Some products are non-refundable and non-exchangeable
  • The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.

Compare Similar Products

Only Show Differences
Ratings
Paint TypeExterior Floor/Masonry PaintInterior/Exterior Floor/Masonry PaintInterior/Exterior Floor/Masonry PaintInterior Floor/Masonry PaintInterior/Exterior Floor/Masonry Paint
Job Type(s)Porch/FloorPorch/Floor, ConcretePorch/Floor, ConcretePorch/Floor, ConcreteConcrete
Paint FinishFlatHigh GlossHigh GlossTop CoatSatin

Reviews

Review this product

Select to rate the item with 1 star. This action will open submission form.
Select to rate the item with 2 stars. This action will open submission form.
Select to rate the item with 3 stars. This action will open submission form.
Select to rate the item with 4 stars. This action will open submission form.
Select to rate the item with 5 stars. This action will open submission form.
Be the first to review this product

Questions

1 - 6 of 6 Questions

Q: We have applied epoxy to our floor in our house and it scratches easily. We want to sand and apply a final coat, will this scratch from dog claws and moving furniture?

5 years ago
1 Answer
  • A: Hi Heatherc, While the coating is tough, it can be scratched from dog's nails if they are long and from moving furniture. When moving furniture, you should still avoid dragging it across the floor. If 7 days has surpassed from your last coat, we recommend cleaning the floor if it was used, scuff sand lightly with 60-80 grit sand paper, remove the sanding dust and reapply your final coat. We hope this new information it helpful.

    5 years ago
    Helpful?

Q: Can this product be put over Armour Coat enamel paint?

9 years ago
1 Answer
  • A: The Armor Coat enamel paint is not a floor coating, so we wouldn't recommend that Rock Solid be applied over it. Rock Solid can be applied over an existing floor paint, provided the surface is cleaned well, and scuffed with 60 grit sandpaper first. If the surface is a garage floor, the existing paint should also be a garage floor coating, capable of withstanding vehicle traffic. If it is not, we'd recommend the paint be removed before the floor is coated with Rock Solid.

    9 years ago
    Helpful?

Q: can this product be used to level a dip in the garage floor? My garage floor has a slight dip/depression that's roughly 1/2" deep over approximately 6 square feet of area. Can this product be used to fill in the depression while coating the entire surface?

11 years ago
1 Answer
  • A: The Rock Solid coating is designed to coat a surface, but will not fill major depressions, or gaps.

    11 years ago
    Helpful?

Q: Can it be applied on an epoxy floor?

12 years ago
1 Answer
  • A: yes we have had good success bonding to an existing epoxy floor coatings by scuff sanding and solvent wiping, then applying our coating system. The potential customer should consider the following when recoating: 1) We will stick to the epoxy, but is the existing epoxy sticking to the concrete? If the existing epoxy is delaminating, then the entire coating system should be ground off. 2) Is the existing wearing off? The bare concrete area need to be prepped. In this instance, there might not be enough coating to bond to and the entire coating system should be ground off. 3) If the existing coating system is in good shape but just needs help on cosmetics, the potential customer could scuff sand with a 80 grit to get an anchor profile. They should then vacuum, leaf blow and solvent wipe with acetone to remove all of the contaminants before applying a new coating system. Make sure the customer is extra safe when using acetone – Respirator, Safety glasses, protective clothing and gloves. Also, this is a flammable solvent, no open flames during use.

    12 years ago
    Helpful?

Q: After applying Rock Sold Garage Coating Grey is it necessary for durability to aditionally purchase and apply the Top Coat product? Is the purpose of Top Coat durability when applied over Grey Garage Coating or only for a high gloss finish?

12 years ago
1 Answer
  • A: The Rock Solid Garage Coat is designed as a one coat application. The clear coat is optional. About 20% of the vendor’s customer base purchase the optional clear coat to add extra durability. These customers are typically owner of high end garages or shops where they are constantly working on their cars.

    12 years ago
    Helpful?

Q: Will this cover 350 sq.ft garage floor ? I have a double garage approx 350sq.ft. How much does this product cover ?

12 years ago
1 Answer
  • A: 489750 RockSolid Gray Garage Coat Kit will cover 250 sf (average size of a single stall garage) For the customers 350 square foot garage, they will need two kits.

    12 years ago
    Helpful?
Top