Obtenez votre commande dès aujourd’hui. Ramassage* ou livraison le jour même** disponible.

En savoir plus

ÉCONOMISEZ JUSQU’À 60 % LORS DU VENDREDI FOU.

MAGASINEZ
Permatex

Nécessaire réparation de dégivreur de lunette arrière Permatex

#038-3738-0
Nécessaire réparation de dégivreur de lunette arrière Permatex
19,99 $
Achetez-le en ligne :
Disponible dans les magasins à proximité :
Quantité mise à jour à 1
Nouveaux paiements numériques disponibles à la page de paiement
Trouvez-le également en magasin:

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

Permatex
Permatex

Nécessaire réparation de dégivreur de lunette arrière Permatex

19,99 $

Produit Détails

Trousse complète contenant tout ce dont vous avez besoin pour faire des réparations de qualité professionnelle en quelques minutes seulement Composants à la fine pointe de la technologie et instructions faciles à suivre avec des photos Pour une réparation économique et de haute qualité du dégivreur de lunette arrière Quick GridMC est le produit d'un projet sur les joints du centre de recherche de General Motors

  • Nécessaire de réparation du désembueur de lunette arrière Permatex pour réparer les conducteurs et contacts

  • Pour réparer les égratignures ou les conducteurs et contacts brisés du désembueur arrière

  • Grande conductivité électrique

  • Rétablit en permanence les contacts du désembueur de la lunette arrière

  • Composants à la fine pointe de la technologie et instructions faciles à suivre avec des photos

  • Pour une réparation économique et de haute qualité du dégivreur de lunette arrière

  • Quick GridMC est le produit d'un projet sur les joints du centre de recherche de General Motors

  • Contenu : mastic de réparation de dégivreur, adhésif conducteur d'électricité, lingette à activateur, brosse, pochoir, lingette à alcool, papier abrasif et feuillet de directives

  • Utilisations : Dégivreur de lunette arrière

Numéro de modèle de l’article 0383738
Hauteur du paquet (cm) 16,51 cm
Hauteur du paquet (po) 6,50 po
Largeur du paquet (cm) 9,70 cm
Largeur du paquet (po) 3,82 po
Poids du paquet (kg) 0,05 kg
Poids du paquet (lb) 0,10 lb
Profondeur du paquet (cm) 1,91 cm
Profondeur du paquet (po) 0,75 po

Notre politique de retour

Consulter l’intégralité de la politique de retour

Garantie

Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.

Renseignements supplémentaires

Consulter les guides de l’utilisateur et d'autres renseignements sur les articles

Comparer des articles semblables

Only Show Differences
Ratings
Largeur du paquet (po)4,00 po3,82 po3,82 po3,82 po

Points saillants de l'evaluation

List of Avantages Highlights
List of Désavantages Highlights

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
24 commentaires avec 5 étoiles.
7 commentaires avec 4 étoiles.
4 commentaires avec 3 étoiles.
6 commentaires avec 2 étoiles.
41 commentaires avec 1 étoile.

Note générale

2.6
22 commentateurs sur 54 (41%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

Images et vidéos du client

Filtrer les avis

  • instructions
  • réparations
  • en cas d'urgence
  • prix
  • achat
  • facilité d'utilisation
  • petit
  • parking
1 to 5 sur 82 commentaire
1 – 5 sur 82 commentaire

Disappointing results

il y a 18 jours
I purchased this item to repair the wires that had come disconnected from the glass on the rear window defroster. I followed the directions twice. It did not adhere to the glass, like the product packaging claimed. I am disappointed in the product and would not recommend using this product for repairing disconnected wires.
Traduire avec Google
Utile?
Réponse de Technical Services :
il y a 16 jours
Technical Services
hello Leroy, thank you for sharing your feedback on the Permatex Rear Window Defogger Repair Kit. Adhering the rear window defogger tab can be tricky. The instructions indicate that ideal temperatures should be between 10°C to 24°C (50°F to 75°F). This specialized adhesive maintains proper electrical conductivity. Additives that would allow the adhesive to cure work best in the stated temperature range. AS well properly preparing the area to be bonded is extremely important for both creating a successful bond and to restore electrical conductivity. A full cure requires 24 hours, and maintaining the optimal temperature range is best during the cure period. Please feel free to reach out to us with any further comments or questions, visit: https://www.permatex.com/contact/. Thank you.

Worked Perfectly

il y a un mois
I purchased this product approximately 2 months ago and followed the instructions step by step. I even watched some other videos and read other reviews/suggestions with the best ones being: shake the paint bottle extensively, paint the line thicker than the grid that comes with the product (not great looking but works) and clean the broken line section(s) with 100% alcohol, if possible. I did all of the above and used masking tape to make my lines a little thicker and have tried it several times in the last 2 months and the rear defroster works perfectly. Also make sure nothing touches the inside of the glass, risking future damage to the lines
Traduire avec Google
Utile?

Not a great product.

il y a un mois
Did not work for me, followed the instructions and while it stuck to the window it dos not work
Traduire avec Google
Utile?
Réponse de Technical Services :
il y a un mois
Technical Services
Hello Peter, thank you for your feedback. We are sorry to hear that the rear defogger is not working. Here are some points to review: 1. The instructions indicate not to bond the tab over the same spot where the tab fell off. The electrical coating (busbar) in that area may have peeled off. 2. Bond the tab to an area where the electrical coating (busbar) is clean and unscratched. 3. If the tab was bonded to a clean and unscratched area of the electrical coating, and the defogger still does not work, then another area of the electrical system needs to be investigated. As an example, ensure that the fuse for the rear defogger system has not broken. Thank you.

👍

il y a 2 mois
Great product. Follow instructions exactly. I watched a couple YouTube videos showing how to make repair first. It took about 15 minutes to apply, overnight to dry.
Traduire avec Google
Utile?

Worked perfectly

il y a 2 mois
It works perfectly. Follow the instructions.
Traduire avec Google
Utile?
1 – 5 sur 82 commentaire

Questions

1 - 6 sur 6 questions

Q : Is it normal to have a hot spot where the repair paint was applied to the grid line?

il y a 3 ans
Traduire avec Google
2 Réponses
  • R : If you have really hot spot then you may want to add layers or make it a bit wider to reduce resistance. if you had a really long gap you may add a piece of thin wire with this conductive paint

    il y a 2 ans
    Utile?
    Traduire avec Google

Q : I have to redo basically all the lines on a 1970s Beetle. Is there enough material here for the whole grid?

il y a 4 ans
Traduire avec Google
2 Réponses
  • R : No, it has enough for maybe 3 inches worth. You have a small bottle for line coating and there is a recommended 3 coats on a segment. Even with the cardboard guide, included, it is difficult to keep the brush lines neat. The guide line is also too large.

    il y a 4 ans
    Utile?
    Traduire avec Google

Q : peut-on le poser en hiver ? dehors ou a la chaleur ou ca dérange pas

il y a 11 ans
2 Réponses
  • R : Non faut le poser en été, la vitre doit être sèche pour que sa colle bien.

    il y a 9 ans
    Utile?

Q : How many inches would this kit repair? How can i tell where the repairs are needed? Thank you for your help :o).

il y a 13 ans
Traduire avec Google
2 Réponses
  • R : you need to use a voltmeter or multimeter set for 12 Volts. touch the sensors to two ends of a line, if there is no current, the line is broken in between.

    il y a 12 ans
    Utile?
    Traduire avec Google

Q : Missing adhesive; removed from Canadian products? I bought a new package and the adhesive is missing but the brush on repair liquid is still there.

il y a 27 jours
Traduire avec Google
1 Réponse
  • R : Hello JC066, The Permatex Rear Window Defogger Repair Kit includes an instruction sheet for use, repair compound, adhesive, activator towelette, brush, stencil, alcohol towelette and sandpaper. If the product you purchased is missing something from the listed kit contents kindly return to the store it was purchased at for an exchange as this is an uncommon instance. Thank you

    il y a 24 jours
    Utile?
    Traduire avec Google

Q : What does the kit include?

il y a 10 ans
Traduire avec Google
1 Réponse
  • R : 38-3738-0 Permatex Rear Window Defogger Repair Kit includes1 comprehensive instruction sheet, repair compound 1.4ml, adhesive 0.8ml, activator towelette 0.6ml, 1 brush, 1 stencil, 1 alcohol towelette, 1 sandpaper 2"x4" (5cm x 10cm).

    il y a 10 ans
    Utile?
    Traduire avec Google
Haut