Minwax
Polyuréthane à base d'huile pour planchers à séchage super rapide Minwax, 3,78 L/1 gallon
#048-0832-8
99,99 $
Lustré transparent
- Lustré transparent
- Satiné transparent
- Semi-lustré transparent
Achetez-le en ligne :
- GratuitOffert
- Offert
- Indisponible
Ramassage à Leduc, AB
6 En stock
Ramassage disponible à 09 h 00, 05 déc.
Quantité mise à jour à 1
Trouvez-le également en magasin:Allée 47
Il n’en reste que 6
au Leduc, AB
Ajouter au registre
À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.
Produit Détails
Le polyuréthane à séchage super rapide Minwax pour planchers offre une finition protectrice, durable, transparente, à base d'huile, formulée pour une utilisation sur les planchers de bois dur.
Polyuréthane à séchage ultra-rapide forme une couche transparente dure protégeant et embellissant les surfaces en bois d'intérieur telles les planchers, meubles, moulures et portes
Fini protecteur longue durée idéal pour le bois franc, le bois tendre et les parquets
Durabilité supérieure pour les planchers
Ne nécessite aucun ponçage entre les couches
Sous le seuil 350 COV (composés organiques volatiles)
Lustrée, semi-lustrée ou satinée
3,78 L
| Numéro de modèle de l’article | CM1302700 |
|---|---|
| Fini de la teinture | Clair |
| Type de teinture | Teinture d'intérieur |
| Matériau de la base | Huile |
| Couleur prémélangée de la teinture | Lustré transparent |
| Utilisations du produit | Intérieur |
| Taille du pot de teinture | 3,7 L (1 gallon) |
| Nettoyage de la teinture | Essences minérales |
| Méthode d'application | Brosse |
| Nombre de côtes recommandé | 2 |
| Fonctionnalités avancées | Sans fonctionnalités avancées |
|---|---|
| Durée de conservation après l’ouverture (mois) | 99 mon |
| Durée de conservation (année) | 99 a |
Garantie
- Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.
Commande en ligne
- Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
- Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
- La livraison le jour même coûte 9,99 $ par commande.
- Informations sur une commande en ligne
Retours
- La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
- Certains articles ne sont pas remboursables ni échangeables.
- La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.
Acheter des produits connexes
- Offres hebdomadaires
- Les clients ont aussi consulté
- Vers les produits tendances
- Plus de cette marque
Souvent achetés ensemble
+++
$177.96
Points saillants de l'evaluation
Évaluations
Filtrer les avis
- ponçage
- bois
- achat
- la satisfaction
- résultats
- instructions
- odeur
- présentation
Cote
Paramètre régional
1 to 5 sur 74 commentaire
1 – 5 sur 74 commentaire
Les plus récents
1 étoile(s) sur 5.
Drying
il y a 3 mois
Satin finish first two coats looked great,had a few dry spots and went to coat 3. Went high gloss . Sanded recoatedstill glossy.3 more times still glossy.called help line just questing. It was very well stirred
Traduire avec GoogleUtile?
Réponse de MINWAX :
il y a 3 mois
MINWAX
Thank you for taking the time to review the Super Fast Drying Polyurethane for Floors. I am very sorry to hear that you are experiencing up-glossing. Generally, up-glossing is caused by two conditions: insufficient agitation of the product, or a slightly heavier-than-recommended application of the product to the surface. When using our semi gloss, satin, matte, or ultra flat products, it is very important that you thoroughly mix the product before and during application. This is due to the flatteners that are included in the formulation, which create the duller semi gloss, satin, matte, or ultra flat sheens. These flatteners have a tendency to settle towards the bottom of the container, which it is why it is extremely important to ensure that they are thoroughly distributed throughout the container before starting your project. It is also equally important to continue re-stirring the product every 15 minutes or so during your application to ensure that these flatteners do not begin to settle towards the bottom of the container again. If they do, the result will be a higher sheen than expected or desired.
If you have ensured that the product is thoroughly stirred before and during application, then your up-glossing issue may be caused by a slightly heavy application of the product. When any of these sheens are applied a little heavier to the surface of a project, these flatteners can again begin to settle towards the bottom of the coating. A thicker layer of product will take a bit longer to dry, which gives the flatteners time to sink to the bottom instead of drying on the surface as they are intended. The result will be a higher sheen than desired.
Fortunately, up-glossing can be relatively easy to correct. You will simply need to apply one more coat of product that has been adequately mixed. Make sure to thoroughly stir the container (pulling from the bottom of the container to the top) before and during your application for the best possible results. Also, be sure to apply in a thin coat to the surface per label directions and you should have a pleasing finish for your project. If you would like to discuss your review further please contact us directly at 1-800-523-9299 or info@cbgbrandreview.com. Sincerely, L.T., Digital Care Team
If you have ensured that the product is thoroughly stirred before and during application, then your up-glossing issue may be caused by a slightly heavy application of the product. When any of these sheens are applied a little heavier to the surface of a project, these flatteners can again begin to settle towards the bottom of the coating. A thicker layer of product will take a bit longer to dry, which gives the flatteners time to sink to the bottom instead of drying on the surface as they are intended. The result will be a higher sheen than desired.
Fortunately, up-glossing can be relatively easy to correct. You will simply need to apply one more coat of product that has been adequately mixed. Make sure to thoroughly stir the container (pulling from the bottom of the container to the top) before and during your application for the best possible results. Also, be sure to apply in a thin coat to the surface per label directions and you should have a pleasing finish for your project. If you would like to discuss your review further please contact us directly at 1-800-523-9299 or info@cbgbrandreview.com. Sincerely, L.T., Digital Care Team
5 étoile(s) sur 5.
Different use but same outstanding results
il y a 3 mois
I have used the poly for floors on several table tops
My customers love its durability and shine.
I know its for floors but if you want a top coat that will stand the test of time and give your hardwood table a shine that beats all
Try it I have 2 boys and they really threw everything at it school projects and all
25 years later and it still looks great
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur minwax.com
5 étoile(s) sur 5.
Contest
il y a 4 mois
1 étoile(s) sur 5.
Horrible smell! Do not recommend
il y a 8 mois
Horrible product. The smell is awful. We moved out of the house for a week and ventilated and it still smells terrible. We have young children and are concerned for their safety with the strong off gassing. We are now having to move out again and sand this terrible product off the floors.
Traduire avec GoogleNon, Je ne recommande pas ce produit.
Affiché initialement sur minwax.com
Réponse de minwax.com :
il y a 8 mois
Customer Support
Thank you for taking the time to review the Super Fast Drying Polyurethane. We apologize you had an issue with the odor of the product. Since it is oil based, it will have an odor. Ventilation and air flow is important when applying and also while drying. If you would like to discuss your review further, please contact us directly at 1-800-523-9299 or info@cbgbrandreview.com. Sincerely, L.T., Digital Care Team
5 étoile(s) sur 5.
Fast drying, beautiful amber tone on milled wood
il y a un an
This product worked great for us on a floor made out of chainsaw milled lumber that had been planed and sanded. The first coat on a bit under 37 m2 (400 ft2) of flooring used a bit more than 3/4 of a can. It dried fast allowing the second coat to be applied later that afternoon. The second coat used less than half a can.
We are very happy with the result. Spilled water beads up nicely on the surface without leaving any stain marks.
Traduire avec GoogleUtile?
1 – 5 sur 74 commentaire
Questions
Commencez à taper votre question et nous vérifierons si elle a déjà été posée et répondue.
1 - 10 sur 11 questions
Réponses les plus utiles
Q : I used water based polyurethane on hardwood floor, can I put oil based polyurethane on top of it?
il y a 8 mois2 Réponses
- Traduire avec Google
R : Typically I would not suggest doing this. You must sand away the water based product. Preparation is the key for best results. The water base does not last as long as the oil base. I had done test areas with water base. Then a few years later I redid the whole floor with the oil based product. Came out beautiful
il y a 8 moisUtile?
Q : I used oil based polyurethane on hardwood floor, can I put water based polyurethane on top of it?
il y a 8 mois2 Réponses
- Traduire avec Google
R : yes
il y a 8 moisUtile?
Q : Does this oil based polyurethane yellow over time ?
il y a un an2 Réponses
- Traduire avec Google
R : No it does not
il y a un anUtile?
Q : Can it be used on laminate flooring
il y a 2 ans2 Réponses
- Traduire avec Google
R : Yes
il y a 2 ansUtile?
Q : Will this product protect/seal a previously oil varnished floor that has been sanded to mostly bare wood (with some old varnish left in spots sander can’t reach) and oil stained ( dried for 3 days) ?
il y a 3 ans2 Réponses
- Traduire avec Google
R : Hi, thanks for the interest in our Super Fast-Drying Polyurethane for Floors product. We can't guarantee our product will be compatible over other coatings. Sincerely, Dane @ Minwax Customer Support.
il y a 3 ansUtile?
Q : Will this work to level a rough plywood floor?
il y a 3 ans1 Réponse
- Traduire avec Google
R : Yes,it will seal the surface. However you will have to sand before and/or after, depending on the surface roughness. I sanded / sealed my dri core 2×2 panels so that my grandkids could play, 2 coats at least. Cheers
il y a 3 ansUtile?
Q : I am looking at using this product to cover a newly painted floor section. It is a latex painted section. Would you recommend this or any other solution.
il y a 5 ans1 Réponse
- Traduire avec Google
R : Hello. We don't offer a floor-rated product for use over paint. Regards, Minwax Customer Support
il y a 5 ansUtile?
Q : Is theis product ok to use outside?
il y a 6 ans1 Réponse
- Traduire avec Google
R : Hello. Super Fast-Drying Polyurethane is for indoor use only. Regards, Minwax Customer Support
il y a 6 ansUtile?
Q : Looking for a product to re-shine heavy duty vinyl flooring that looks like hardwood...does anyone know if this product could be used on it and if not any other suggestions? Thank you
il y a 7 ans1 Réponse
- Traduire avec Google
R : Hello. Yes, we have the answer to your question. Our finishes are meant for use on hardwood floors only. They will not adhere for long/at all to vinyl. Regards, Minwax Customer Service
il y a 7 ansUtile?
Q : Would it be possible to use a premier roller to apply the polyurethane to the floor?
il y a 7 ans1 Réponse
- Traduire avec Google
R : It is recommended to use apply a thin coat using a lambswool or synthetic pad applicator, or a natural bristle brush and to maintain a wet edge to avoid lap marks.
il y a 7 ansUtile?
1 - 10 sur 11 questions
