NOTRE MAGASIN

Crédit Offert* EN SAVOIR PLUS

Soutien État de commande
EN
FRANK

Vadrouille à essorage rapide FRANK Quick Squeeze

#142-0401-8
Vadrouille à essorage rapide FRANK Quick Squeeze
19,99 $

Malheureusement, cet article ne fait plus partie de l’assortiment du magasin que vous avez sélectionné et les magasins de la région.

Ces produits similaires présentés ci-dessous pourraient vous intéresser.

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

FRANK
FRANK

Vadrouille à essorage rapide FRANK Quick Squeeze

19,99 $

Produit Détails

  • Vadrouille à essorage rapide FRANK Quick Squeeze d'utilisation facile et efficace

  • Éponge durable avec tissu en microfibre extrêmement absorbant

  • Convient à tous les planchers durs, y compris la céramique, le bois, le marbre et les carreaux

Garantie
  • Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.
Commande en ligne
  • Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
  • Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
  • La livraison le jour même coûte 9,99 $ par commande.
  • Informations sur une commande en ligne
Retours
  • La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
  • Certains articles ne sont pas remboursables ni échangeables.
  • La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.

Comparer des articles semblables

Only Show Differences
Ratings
Type de vadrouilleVadrouille à vaporisateurFrangesTorsionPlat
Longueur de la poignée (po)38,98 po49,61 po51,18 po48,03 po
Matériau principalFibres synthétiquesFibres synthétiquesFibres synthétiquesFibres synthétiques

Offres hebdo

Points saillants de l'evaluation

List of Avantages Highlights
List of Désavantages Highlights
Impossible de générer un Désavantages approprié pour le moment.

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
0 commentaires avec 5 étoiles.
0 commentaires avec 4 étoiles.
1 commentaires avec 3 étoiles.
0 commentaires avec 2 étoiles.
1 commentaire avec 1 étoile.

Note générale

2.0
0 commentateurs sur 2 (0%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

    Filtrer les avis

    • frotter
    • résultats
    • poussière
    • conception
    • sol
    • en magasin
    • achat
    1 to 2 sur 2 commentaire
    1 – 2 sur 2 commentaire

    Poor Construction/Design

    il y a 7 ans
    The first mop I grabbed at the store was jammed. The sliding sleeve on the shaft was stuck. I bought a different mop which was sliding freely. After one use at home, the mop head would not stay on the mop. The mophead is supposed to come off since its only held on by velcro. One side of the velcro, Hook I think, is glued to the mophead and adheres to the Loop side which is glued to the mop. Unfortunately, the glue (or what little glue there was) failed and the mophead was no longer attached to the velcro. Whenever the mophead was squeezed, the mophead fell off. The velcro attached to itself perfectly but the glue as the weak link in the chain. The mop needs either better/more adhesive for the velcro or a different method of securing the mophead to the mop. My next step is to let the mop dry and then use Gorilla Glue to attach the velcro to the mophead.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?

    Interesting Design but Flawed

    il y a 10 ans
    The Frank Quick mop offers a clever design but there are problems. It is good for quick damp wipes but not for more thorough cleaning. The mop sponge holds too much water compared to other squeeze-style sponge mops. You cannot squeeze enough water out of it. As a result, I tend to push the Frank Quick sponge against the bathtub wall or to shake out excess water in the bathtub. It has a low profile so it is easy to get under beds and low standing furniture but the pivoting head rotates about too easily so it is hard to control the orientation of the mop head. It flips and flops on its own. It is not good for hard scrubbing or in corners. The sponge folds in the middle as part of the design to squeeze out water but this means the ends of the sponge fold up off the floor too easily making it hard to apply even pressure or to get deep into corners. I found it tended to leave wet globs of hair, dirt, and dust in the corners that needed to be wiped up later with a cloth. So far the head has detached once from the pivoting mechanism but I was able to put it back on. Basically, it needs a locking mechanism and/or greater friction to effectively manage the free rotation of the mop head and it needs to be able to squeeze more water out of the sponge.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?

    Questions

    1 - 1 à 1 question

    Q : Mop head How do you clean the mob head. It doesn't seem to come apart to clean or replace it.

    il y a 10 ans
    Traduire avec Google
    2 Réponses
    • R : Turn the mop upside down so the top of the handle touches the floor, then just grab a handful of the white cloth material and pull gently, up and towards the middle of the mop head. The white cloth is attached to a white ring which will snap off of the green circular part. Then you can throw the whole piece in the wash or replace it by doing these steps in reverse.

      il y a 10 ans
      Utile?
      Traduire avec Google
    Haut