Mastercraft
Établi robsute Mastercraft
#057-0117-0
299,99 $
Malheureusement, cet article ne fait plus partie de l’assortiment du magasin que vous avez sélectionné et les magasins de la région.
Ces produits similaires présentés ci-dessous pourraient vous intéresser.Objets similaires
À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.
Produit Détails
Établi doté d'un panneau perforé rigide pour accrocher les outils fréquemment utilisés
Plateau en MDF et mélamine
Deux tiroirs coulissants à roulement à billes de taille moyenne et un grand
Trois unités de stockage au-dessus du panneau perforé dont deux tiroirs coulissants fermés et une grande tablette
Barre d'alimentation à trois prises pour outils électriques à fil
Comprend une lampe de travail
Dimensions : 47 po L x 23,5 po P (119 x 60 cm)
Warranty
- Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.
Commande en ligne
- Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
- Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
- La livraison le jour même coûte 9,99 $ par commande.
- Informations sur une commande en ligne
Retours
- La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
- Certains articles ne sont pas remboursables ni échangeables.
- La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.
Comparer des articles semblables
Only Show Differences | Consultation en cours | |||||
| Ratings | ||||||
| Capacité | Service intense | Service moyen | Service intense | Service intense | ||
| Couleur | Noir | Noir | Noir | Jaune | ||
| Fonctionnalités avancées | Ajustable | Glissières à roulements à billes, Indicateur verrouillable, Résiste aux rayures, Couvercle ouvert sécurisé | Pliable | Ajustable, Panneau perforé, Pliable, Verrouillable |
Acheter des produits connexes
- Offres hebdomadaires
- Les clients ont aussi consulté
- Vers les produits tendances
- Plus de cette marque
Points saillants de l'evaluation
Évaluations
Filtrer les avis
- achat
- prix
- instructions
- installation
- petit
- la satisfaction
- bois
- poids
Cote
Paramètre régional
1 to 5 sur 32 commentaire
1 – 5 sur 32 commentaire
Les plus récents
1 étoile(s) sur 5.
Only buy this product if it's on a supersale
il y a 9 ans
I'll keep this short.. only buy this if it's on a really, REALLY, good sale. It's cheaply made, maybe a fifth of the holes would not line up and a bunch of nuts didn't even have threads in them. The sliding drawers barely fit and don't sit completely flush.
I'm really glad I bought this for a third of it's retail price.
Traduire avec GoogleNon, Je ne recommande pas ce produit.
Utile?
4 étoile(s) sur 5.
Impossible to passup Pricing
il y a 10 ans
Solid unit! Very simple to build, just time consuming. You only need a phillips (star screwdriver) an 8mm and a 10mm wrench! My unit came with all screws, extra washers, and only one item was labelled incorrectly, but no big deal.
Bought it after reading everyones negative reviews, and as others pointed out - a couple (read two) holes didn't line up perfectly.
The drawers are VERY difficult to operate, and feel WAY too stiff. I'm sure I can loosen some parts to free them up, but right now they're seemingly, "put stuff in and jam it shut and forget about it" drawers ;)
The top cabinets are nice, work very well - but both of them were dented. Only notice it if you look, but I look!
The table top and bottom shelf are excellent quality. Certainly enough room for a typical Vice, not sure what the other reviewers meant.
The light that comes with it has a protective casing around it, and is quite bright! No need for brighter imho.
Easy enough to move around once built as well. I would have rated it five stars if the items weren't dented, and the drawers were high quality. Some folks mention the instructions are hard to read, they're not. There are three types of screws with the unit, the ones you use the most of are in one bag, the other two (for wood, and for drawers) are in another bag. Super simple. The instructions ARE in French and English, I.E. Pages 1-4 are English, then page 5 is French, then pages 6-10 are English again. No big deal, just need to flip to page 5 of the FRENCH side for English instructions. Funny that.
Thinking I'll be picking up another one!
Traduire avec GoogleOui, Je recommande ce produit.
Utile?
5 étoile(s) sur 5.
Super établis
il y a 10 ans
Nous avons acheter cette établis, elle est complete, et solide.
tres contente du produit
Oui, Je recommande ce produit.
Utile?
4 étoile(s) sur 5.
Better than expected
il y a 10 ans
After reading the reviews here, I had mixed feelings about purchasing this workbench.
Putting it together took quite a while, but wasn't really complicated as every single part was labeled. As others have pointed out before, the pictures in the manual are rather tiny and they mixed up the English and the French descriptions. Not a big deal though, it just means you need to flip more pages unless you are bilingual.
Most bolt holes lined up just fine, in fact there was only a single one that did not. Again, no big deal.
The drawers fit well, but they are clearly not designed for heavier items.
Considering the low price of this workbench, I'd say it's a great deal. I mainly use it for my hobby and I don't think there's anything better in this price range.
Traduire avec GoogleOui, Je recommande ce produit.
Utile?
4 étoile(s) sur 5.
Good Work Bench.
il y a 10 ans
It's a good work bench for home use. Patience is needed to put it together. No big deal, just take you time. A nice project.
Traduire avec GoogleOui, Je recommande ce produit.
Utile?
1 – 5 sur 32 commentaire
Questions
Commencez à taper votre question et nous vérifierons si elle a déjà été posée et répondue.
1 - 10 sur 30 questions
Réponses les plus utiles
Q : Does it come with an assembly guide?
il y a 14 ans4 Réponses
- Traduire avec Google
R : The assembly instructions I received with my unit are adequate but not great. Be prepared to have to re-install a couple of parts because they are upside down (the manual is not that clear in places).
il y a 13 ansUtile?
Q : Are you able to assemble it with the drawers on the left hand side as well
il y a 12 ans3 Réponses
- Traduire avec Google
R : I don't know why the CT "expert" said no, this is a stated option in the instructions. Shown is a photo of the assembly manual.
il y a 10 ansUtile?
Q : Top shelf dimensions What are the dimensions of the top shelf? Thanks
il y a 11 ans2 Réponses
- Traduire avec Google
R : Top shelf: 8" x 471/2"
il y a 11 ansUtile?
Q : how much weigh this bench could hold? I'm planning to buy this for a 65 gallons aquarium ( about 650lbs total) its this strong enough ?? thanks
il y a 11 ans2 Réponses
- Traduire avec Google
R : I estimate that 650 LBS would be at or exceeding a safe tolerance. So, yes, it could hold it, but this work bench is NOT suitable for your purpose.
il y a 11 ansUtile?
Q : Can casters/wheels be attached? Can casters or wheels be attached to this workbench, in order to make it easier to move around the garage or shop?
il y a 11 ans2 Réponses
- Traduire avec Google
R : You would have to reinforce the legs with a block of wood or steel. Can be done.
il y a 11 ansUtile?
Q : How do I get an extra drawer rail and track if my bottom one came out of the track and won't fit back in? One of the track's for my bottom drawer came off the rail and won't go back into the track with the ball bearings. Are there spare parts (a track/rail combo, or pair) available to get or even buy for the bench?
il y a 12 ans2 Réponses
- Traduire avec Google
R : CAll the 800 number in the manual - 800 689 9928, they have parts. If you haven't already, do it soon, it's been (unfortunately) discontinued.
il y a 10 ansUtile?
Q : Shortening legs I only have 65" clearance. Can it be assembled without the legs and sit flat on the floor or possibly 1" above floor height? Could the legs be cut shorter
il y a 12 ans2 Réponses
- Traduire avec Google
R : The assembled unit stands about 68". You cannot assemble the unit without legs as the side frame assemblies function as both the legs and the structure to support the upper cabinet, benchtop, and side drawers. You could cut the legs down to shorten the overall height of the assembled unit. I would do this before assembly as the unit is quite heavy.
il y a 12 ansUtile?
Q : Can a vise be attached? Is it possible to attach a vise to this bench?
il y a 12 ans2 Réponses
- Traduire avec Google
R : Depends on the vice. if your vice clamps to a workbench, it should be ok - this unit is designed for that. The box this comes in says it has a "work surface with 1½ " overhang for clamping". If your vice doesn't clamp to a workbench, then you may have to drill holes to mount it.
il y a 10 ansUtile?
Q : What's the height of the table of the workbench from the floor?
il y a 13 ans2 Réponses
- Traduire avec Google
R : 36.5"
il y a 13 ansUtile?
Q : Does it come with a power cord for the power bar? I checked inside the main box and the smaller box that contained the power bar and see nothing. Was a power cord supposed to be included? (I would hope so..)
il y a 13 ans2 Réponses
- Traduire avec Google
R : no
il y a 13 ansUtile?
1 - 10 sur 30 questions
