Méga de printemps sur les pneus : RABAIS JUSQU'À 25 %* sur certains pneus et jantes de marques de qualité.

Magasinez
NOTRE MAGASIN

Crédit Offert* EN SAVOIR PLUS

Soutien État de commande
EN
NOMA

Cordon pour chauffe-moteur NOMA

#052-2463-2
Cordon pour chauffe-moteur NOMA
39,99 $
Exclusivité

Malheureusement, cet article ne fait plus partie de l’assortiment du magasin que vous avez sélectionné et les magasins de la région.

Ces produits similaires présentés ci-dessous pourraient vous intéresser.

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

NOMA
NOMA

Cordon pour chauffe-moteur NOMA

39,99 $

Produit Détails

  • Cordon pour chauffe-moteur NOMA avec minuterie et capteur de température intégrés

  • Peut être allumé ou éteint manuellement ou avec une minuterie

  • Peut être déclenché automatiquement par un capteur quand la température atteint le niveau programmé

  • Utilisez les réglages qui vous conviennent

  • Surveille la consommation d’énergie en allumant le chauffe-moteur de votre auto que quand il le faut, vous n’aurez plus à vous soucier d’avoir une auto trop froide pour démarrer

  • Réduit la consommation d’énergie en éteignant le chauffe-moteur quand la température atteint -10 °C (14°F) ou avec la minuterie

  • Résiste aux intempéries, résiste au froid jusqu’à -40 °C

  • Homologation CSA

Garantie:
  • Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.
Commande en ligne
  • Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
  • Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
  • La livraison le jour même coûte 9,99 $ par commande.
  • Informations sur une commande en ligne
Retours
  • La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
  • Certains articles ne sont pas remboursables ni échangeables.
  • La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.

Comparer des articles semblables

Only Show Differences
Ratings
Longueur du cordon (m)2,00 m10,00 m4,57 m3,05 m
Nombre de prises de courant3333
Nombre de conducteurs3333

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
7 commentaires avec 5 étoiles.
7 commentaires avec 4 étoiles.
3 commentaires avec 3 étoiles.
5 commentaires avec 2 étoiles.
16 commentaires avec 1 étoile.

Note générale

2.6
13 commentateurs sur 37 (35%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

Images et vidéos du client

Filtrer les avis

  • achat
  • prix
  • par temps froid
  • paramètres
  • retours
  • tournant
  • qualité
  • instructions
1 to 5 sur 38 commentaire
1 – 5 sur 38 commentaire

Works as advertised

il y a 4 ans
I have use this unit for several years with no problems. It works as advertised. My only wish is that the plug input from the vehicle had a lead/plug extension or longer shroud. This would protect the plug from getting wet when there is snow on it. All in all a decent product.
Traduire avec Google

Oui, Je recommande ce produit.

  • Plugged in.
  • Input from vehicle.
  • Ready for winter.
Utile?

good extension with on off switch

il y a 4 ans
good extension with on off switch (timer or temperature control forget it)
Traduire avec Google
Utile?

Bad noma 052-2463-2 timer

il y a 8 ans
It constantly reverts back to"C". One week battery is defiantly weak. Even in doors the battery is zero. You can not trust it.
Traduire avec Google

Non, Je ne recommande pas ce produit.

Utile?

Complicated to program and use

il y a 9 ans
This block heater cord is tough to program and complicated to use. Make sure you keep the instruction sheet handy because you are going to need it every time you go to change anything, and maybe every time use use it even. Nothing about this unit is intuitive.
Traduire avec Google

Non, Je ne recommande pas ce produit.

Utile?

minuterie qui bogue par grand froid

il y a 9 ans
j'avais acheté ce produit il y a quelques année et j'ai été vraiment déçu en plus de ne pas afficher la bonne heure il cessait parfois de fonctionner sous -30°c au moment ou j'en avait le plus besoin. finalement j'ai racheté une minuterie mécanique qui elle fonctionne a toute température.

Non, Je ne recommande pas ce produit.

Utile?
1 – 5 sur 38 commentaire

Questions

1 - 10 sur 35 questions

Q : Noma timer 52 2463-2 from Cdn Tire. Will this timer hold the programmed times in when a power-out occurs, or does it need to be re-programmed?

il y a 15 ans
Traduire avec Google
7 Réponses
  • R : There is a battery backup that will hold your settings for about 1 week.. Note the operative word about. This will work fine when new.. but as the battery gets old.. (This will shorten) to the point of not at all when dead.. Not sure if you could get a new battery.. But more than likely not worth the effort.

    il y a 14 ans
    Utile?
    Traduire avec Google

Q : Do the temperature activated and programable timer features work in conjunction? i.e. If the timer is set to 6am-8am, will it turn on only during that window as well ONLY if the temperature is below -10c? Or are the features an either / or where if the timer is set it will always turn on between 6am - 8am in my example..

il y a 15 ans
Traduire avec Google
5 Réponses
  • R : Yes The timer has 3 working modes Auto mode (AU) Auto and Temperature mode (AC) Manual mode (LL) AU- Works with timer only AC- The one you want. LL- you press the button On/Off

    il y a 14 ans
    Utile?
    Traduire avec Google

Q : time consistantly off? I was wondering if anyone else is having issues with the time being off? Had it plugged in for two weeks and now it seems to be about 2 hours slow. Wondering if this is usual or should return for another one?

il y a 14 ans
Traduire avec Google
3 Réponses
  • R : Mine runs slow as well. in as little as a couple of weeks it's off by more than an hour. Would appear this is a common problem.

    il y a 13 ans
    Utile?
    Traduire avec Google

Q : Is there a cold reset on these timers to wipe out the program that was installed and start over

il y a 15 ans
Traduire avec Google
3 Réponses
  • R : Yes Press and hold the "Enter" button for 5 seconds from the time mode.

    il y a 14 ans
    Utile?
    Traduire avec Google

Q : Can I set this so it will only come on Monday to Friday? I would like to be able to plug my truck in Friday night and not have it come on untill Monday morning.

il y a 15 ans
Traduire avec Google
3 Réponses
  • R : No,it has no knowlege of the day or setting for them.

    il y a 14 ans
    Utile?
    Traduire avec Google

Q : Can the batteries be changed in this unit??

il y a 13 ans
Traduire avec Google
2 Réponses
  • R : Doesnt use batteries... it's powerline powered... Garbage product that loses time and electronics reset in it. RETURN IT for a refund while you can! GREAT idea but poor quality design or quality control!

    il y a 12 ans
    Utile?
    Traduire avec Google

Q : Lost setting instructions, can you please provide.

il y a 13 ans
Traduire avec Google
2 Réponses
  • R : Function and operation 1 - This timer has 3 working modes a - Auto Mode(AU) b - Auto and Temperature Control Mode (AC) c - Manual Mode (LL) Press "MODE" button and the LED display will cycle through these three modes. 2 - There is an output indicator light which turns Green (On all modes) and red (Off - manual mode) 3 - There is a bettery backup that can retain programs for about 1 week after power outage. Operation 1 - On first use . Connect the unit to 125V AC power source. The LED display blinks 'C'. The unit at this moment is in initial state, where time and program need to be set. 2 - Press the "TIME" button, the LED display will now show "12.00", now the unit is entering time setting mode a - The time interval for this product is 15 minutes b - Press "TIME" button again. LED dislays 12:15 with each press of the time button the time increases by 15 minutes. If you press and hold the time button for 2 seconds the LED will increase rapidly. c - After setting the time, press the enter button and the LED will display current time setting. d - To change the clock press the "Enter" and the "TIME" buttons simultanously to enter the editing mode. Press the "TIME" button to adjust the time. Press the enter button to confirm 3 - To program press "mode" button once and the LED will display "AU" which stands for Auto Mode, press the "MODE" button once again and the LED will display "AC" which is the Auto and Temperature Control Mode. Press the "MODE" button once more and the LED will display "LL" which is Manual Mode. Press enter to confirm the selected mode. Press "MODE" button to role over these three options. a - Auto Mode Press "MODE" button and the unit will enter Auto Mode, LED displays "AU" - Press "ENTER" button to confirm. LED displays "P". Press "TIME" button to set program ON time. - After the program ON time is set press "ENTER" button to enter program ending time. LED will display "E". Press the "TIME" button to set the ending time. - Press "ENTER" button to return to normal time display mode. - The program indicator will be turned on after the ON time and ending time have been programmed - Press the "TIME" button to review the program ON time setting and program ending time setting. The LED displays "P" and "E" respectively. After that the LED displays the current time. - In case you want to modify the setting repeat step "a". *** Note: When entering your program if no action takes place within 15 seconds it will go back to the time screen. b - Auto and Temperature Control Mode Press the "MODE" button and the LED will display "AU". Press the "MODE" button again and the LED will display "AC". press the "ENTER" button to confirm. - The timer activates the load only when the folloewing two conditions are met: 1 The temperature is below -10 2 The program on time p is reached For instructionsn on how to set the program ON time and the program ending time please refer to the Auto Mode fucntion - The program indicator will be turned on after the ON time and the ending time have been programmed. - When the program ending time is not yet reached, the load will be deactivated if the temperature rises above -7 and will be activated again if the temperature drops below -10. Once the prgram ending time is reached the load will be deactivated regardless of the temperature. C - Manual Mode Press the "MODE" button to select Manual Mode. When the LED displays "LL" press the "ENTER" to confim. The LED returns to show the current time. Press the "TIME" button to activate the timer the LEd will display ON. Press the "TIME" button again the LED will display off. - In Manual Mode the output indicator will display red when the load is deactivated and green when activated. - To exit manual mode press "TIME" and "MODE" buttons simultanously and the unit will return to Auto mode. The loading will be activated and deavtivated according to the previous setting. 4 Output indicator 1 - In Auto Mode ort Auto Temperature Control Mode when the loadind is deactivated the output indicator tunrs off. 2 - In Manual mode the outpur indicator turns red when loading is deactivated. 3 - In Manual Mode, Auto Mode and Auto Temperature Control Mode the output indicator turns green when the output is activated. To reset all of your settigns including current time and programs, press and hold the "ENTER" button for 5 seconds from the "TIME" mode.

    il y a 13 ans
    Utile?
    Traduire avec Google

Q : Is this powerful enough to plug in my ford expedition block heater?

il y a 14 ans
Traduire avec Google
2 Réponses
  • R : I don't see why not. It's intended use is for "Block Heaters". I'm sure your block heater is not anymore powerful than my Mustang's.

    il y a 13 ans
    Utile?
    Traduire avec Google

Q : I want the timer to be controlled by temp. only. How do I do this?

il y a 14 ans
Traduire avec Google
2 Réponses
  • R : You cannot set this to operate by temperature only. You can program this to operate 23h45min per day, so that it will effectively seem to be controlled by temperature only. Or you can buy a thermocube that does what you are looking for.

    il y a 14 ans
    Utile?
    Traduire avec Google

Q : What is the rated wattage of this unit?

il y a 14 ans
Traduire avec Google
2 Réponses
  • R : 1875 watts (Max Resistive load) aka (for block heater) 8A 1000 watts (Tungsten) aka (if used for lights)

    il y a 14 ans
    Utile?
    Traduire avec Google
1 - 10 sur 35 questions

4 étoiles et plus

Haut