NOTRE MAGASIN

Crédit Offert* EN SAVOIR PLUS

Soutien État de commande
EN
Bondo

Toile de fibre de verre Bondo

#047-5895-0
Toile de fibre de verre Bondo
17,99 $
Mieux notés

12,70 cm

20,32 cm

Achetez-le en ligne :
Ramassage à Leduc, AB
8 En stock
Obtenez-le dès aujourd’hui!

Ramassage disponible à 09 h 00, 31 déc.

Quantité mise à jour à 1
Nouveaux paiements numériques disponibles à la page de paiement
Trouvez-le également en magasin:
8 en stock au Leduc, AB
Allée 26
Ajouter au registre

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

Bondo
Bondo

Toile de fibre de verre Bondo

17,99 $

Produit Détails

La toile de fibre de verre Bondo MD est idéale pour les réparations sur le métal, la fibre de verre, le bois et bien d'autres surfaces. Les brins de fibre de verre entrelacés permettent de combler les trous et les lacunes dans les réparations plus importantes. Lorsque ce produit est utilisé avec la résine de fibre de verre Bondo MD , les réparations sont à 100 % étanches, ce qui est idéal pour la baignoire, la douche, le lavabo, la piscine, les bains à remous, les bateaux et plus encore.

  • Toile de fibre de verre Bondo pour réparer toutes les surfaces, comme le métal, la fibre de verre et le bois

  • Lorsque la toile est utilisée avec la résine de fibre de verre Bondo, les réparations sont à 100 % étanches, ce qui est idéal pour : bain, douche, lavabo, piscine, bains à remous, bateaux et plus

  • Toile souple idéale pour réparer des surfaces profilées

  • Offre une épaisseur additionnelle pour renforcer les structures lorsqu'elle est utilisée avec la résine de fibre de verre

  • Utiliser à l'étape 2 du système de réparation de carrosserie 3M

  • Choix de formats

Numéro de modèle de l’article 499
Type de couverture/bâche Articles de réparation de carrosserie
Forme Feuille
Nombre d’œillets 0
Couleur Blanc
Matériau principal Polypropylène
Hauteur de l'article (po) 2,00 po
Poids de l'article (lb) 0,01 lb
Largeur de l'article (po) 5,00 po
Hauteur du paquet (po) 1,02 po
Largeur du paquet (po) 0,90 po
Nombre de pièces 1
Poids du paquet (lb) 0,52 lb
Profondeur du paquet (po) 1,13 po
Épaisseur de l’article (po) 0,02 po

Notre politique de retour

Consulter l’intégralité de la politique de retour

Garantie

Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.

Comparer des articles semblables

Only Show Differences
Ratings
Type de couverture/bâcheArticles de réparation de carrosserie
FormeFeuille
Nombre d’œillets0

Points saillants de l'evaluation

List of Avantages Highlights
List of Désavantages Highlights
Impossible de générer un Désavantages approprié pour le moment.

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
14 commentaires avec 5 étoiles.
3 commentaires avec 4 étoiles.
0 commentaires avec 3 étoiles.
0 commentaires avec 2 étoiles.
3 commentaires avec 1 étoile.

Note générale

4.3
10 commentateurs sur 10 (100%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

    Filtrer les avis

    • facilité d'utilisation
    • achat
    • réparations
    • en cas d'urgence
    • fiable
    • épais
    • qualité
    • instructions
    1 to 5 sur 20 commentaire
    1 – 5 sur 20 commentaire

    Product was fine

    il y a un mois
    Product was fine but I was solicited for a survey just for buying it
    Traduire avec Google
    Utile?

    Bondo Fiberglass Cloth

    il y a un an
    excellent to create molds
    Traduire avec Google
    Utile?

    Exactly what I needed

    il y a un an
    Needed to reinforce a buggy body. Worked well
    Traduire avec Google
    Utile?

    Bondo

    il y a 2 ans
    Good quality, easy to cut , smooth layout when combined with resin. Easy to work with
    Traduire avec Google
    Utile?

    A bit pricy but worked well.

    il y a 2 ans
    Worked for project and covered well.
    Traduire avec Google
    Utile?
    1 – 5 sur 20 commentaire

    Questions

    1 - 8 sur 8 questions

    Q : I have been hearing that this should be used with mat not on its own. I fixing only part of my boat floor and wanted use this join the two boards together after screwing them down. Can anyone comment?

    il y a un an
    Traduire avec Google
    2 Réponses
    • R : Yes that with the clear resin is the choice you want. Coat the area with resin then lay the cloth on the resin and work in some more resin with a cheap paint brush that will be thrown out after.

      il y a un an
      Utile?
      Traduire avec Google

    Q : Is the finished product sandable?

    il y a 3 ans
    Traduire avec Google
    2 Réponses
    • R : Yes Might require some glazing putty to smooth things for paing, but yes you can sand this product.

      il y a 3 ans
      Utile?
      Traduire avec Google

    Q : What are the cloth dimensions>

    il y a 4 ans
    Traduire avec Google
    2 Réponses
    • R : Hi, thanks for your inquiry. The overall length of the cloth is 8 ft (2.5 m).

      il y a 4 ans
      Utile?
      Traduire avec Google

    Q : What is the weight per yard for this cloth? I see an answer saying 7 oz but I'm not sure if that's the weight per yard? I'm looking to repair my canoe. It's just clear epoxy. I want a similar weight. Thanks Dave

    il y a un an
    Traduire avec Google
    1 Réponse
    • R : I think it is weight per square yard if in ounces. I've repaired several canoes. I cut patches of increasing size to follow the crack/hole contour so I end up with a large overlap to grip the strong area around the hole/crack. Then subsequently smaller patches centred on the crack/hole. First start by cleaning up the crack with a jigsaw and belt sander/grinder. Feather out the crack and clean up the inside of the canoe to allow a good bond with the new glass patch. Wipe down the inside and outside with a strong cleaner to get rid of dirt and wax. Next use packing tape on the outside of the canoe to create a smooth outside surface. No glass will be put on the outside - Set the canoe so the crack is at the bottom to minimize running of the epoxy. Wet the area with epoxy and apply the largest patch first. Get rid of air bubbles with a roller. At the he next patch and maybe some more epoxy to saturate the cloth. Keep adding layers until you've built up the repair to the thickness you want. I'm thinking 3 layers for a small hole and more for a large hole. Let the epoxy cure. Finish sand the outside and paint to match. Rough sand the inside and paint to match. Epoxy is UV sensitive so do paint. I cheap out and use Rustoleum or Tremclad.

      il y a un an
      Utile?
      Traduire avec Google

    Q : What's the cloth weight in imperial and metric ?

    il y a 3 ans
    Traduire avec Google
    1 Réponse
    • R : Hi, thanks for your question. This fiberglass cloth weighs around 6 ounces (170g).

      il y a 3 ans
      Utile?
      Traduire avec Google

    Q : Will this work on a polystyrene foam

    il y a 7 ans
    Traduire avec Google
    1 Réponse
    • R : In order to obtain the information you require, please call 1-888-364-3577

      il y a 7 ans
      Utile?
      Traduire avec Google

    Q : is this product good for using on wooden boats to cover the hull?

    il y a 9 ans
    Traduire avec Google
    1 Réponse
    • R : It would depend on what you are trying to achieve. Using this cloth in conjunction with Bondo Fiberglass Resin and hardener will provide a durable, water-resistant layer on the hull of a wooden boat. Many boats are made out of fibreglass laid up under a layer of gelcoat, aided by a foam or balsa core of some sort for added strength. However, you will have to test for suitability for your application. The wood should be prepped properly and completely dry. Lay-up will have to be air-free to avoid bubbles using proper technique. You should know what thickness you are looking to achieve. Best results usually require an outer coating (if this is being added to the outside of your hull) to enhance waterproof properties. Also realize that this will add weight to your boat.

      il y a 9 ans
      Utile?
      Traduire avec Google

    Q : Why is there imperial measurements in the description but metric in the size drop down menu? Shouldn't the type be in the menu? i.e. cloth, tape, mat

    il y a 9 ans
    Traduire avec Google
    1 Réponse
    • R : Thank you for brigning this to our attention. We will send this information for review and correction.

      il y a 9 ans
      Utile?
      Traduire avec Google
    Haut