Rancho
Support d’amortisseur performance de séries hors route Rancho RS5000
#141-0606-4|No de pièce #RS55287
104,99 $
Mieux notés
- Numéro de pièce: RS55287
Achetez-le en ligne :
- GratuitOffert
- Stock épuisé
- Offert
Ramassage à Leduc, AB
Ramassage entre le 27 déc. - 28 déc.
Besoin d’une livraison aujourd'hui :
- 2 En stock
- 2 En stock
- 2 En stock
Quantité mise à jour à 1
Trouvez-le également en magasin:
En rupture de stock au Leduc, AB
Ajouter au registre
À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.
Besoin d’aide pour l’installation?
Les services automobiles sont disponibles dans votre magasin
Produit Détails
Choisissez une durabilité et une performance supérieures avec le support d'amortisseur performance de séries hors route Rancho RS5000. Sa soupape en 10 étapes sensible à la vitesse s'adapte aux besoins de votre véhicule pour assurer un roulement doux et équilibré sur tous les terrains. Doté d'une tige de piston robuste pour plus de solidité et d'un soufflet protecteur pour protéger contre les débris, le Rancho RS5000 est le choix idéal pour une fiabilité et une maîtrise accrues.
- Caractéristiques
- Spécifications
- Ressources
Tige de piston conçue pour ajouter de la force et de la durabilité et assurer une bonne performance, quel que soit l'environnement
Soufflet protecteur inclus pour protéger la tige d'amortisseur et le joint d'huile
Vendu séparément
Monotube
| Numéro de modèle de l’article | RS55287 |
|---|---|
| Conception interne | Monotube |
| Durabilité | Forest Stewardship Council (FSC) Certified, Programme for the Endorsement of Forest Certification (PEFC), Sustainable Forestry Initiative (SFI) Certified |
| Durée prolongée | 0,01 po |
| Fonctionnalités avancées | No Advanced Features |
| Hauteur de suspension | Stock |
| Hauteur du paquet (cm) | 8,41 cm |
| Hauteur du paquet (po) | 3,31 po |
| Largeur du paquet (cm) | 8,41 cm |
| Largeur du paquet (po) | 3,31 po |
| Liste d’accessoires | No Accessories Included |
|---|---|
| Longueur une fois replié | 0,01 po |
| Numéro de pièce du fabricant | RS55287 |
| Poids du paquet (kg) | 3,18 kg |
| Poids du paquet (lb) | 7,01 lb |
| Profondeur du paquet (cm) | 61,60 cm |
| Profondeur du paquet (po) | 24,25 po |
| Type d'emballage | Sold Individually |
Garantie
Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie limitée Canadian Tire.
Acheter des produits connexes
- Offres hebdomadaires
- Les clients ont aussi consulté
- Vers les produits tendances
- Plus de cette marque
Points saillants de l'evaluation
Évaluations
Filtrer les avis
- prix
- installation
- en cas d'urgence
- qualité
- la satisfaction
- personnel
- le volume
- résultats
Cote
Paramètre régional
1 to 5 sur 15 commentaire
1 – 5 sur 15 commentaire
Les plus récents
4 étoile(s) sur 5.
Good so far
il y a 10 mois
Seem to be good quality. Didn't come compressed by plastic banding like in videos I had watched. Mine were compressed and wrapped around by plastic wire which you wouldn't be able to remove once the rubber boot was installed, so had to cut them off and let shocks expand, which makes it a little harder to install but not too bad for me since the whole box of the truck was off. Hope they hold up as I put some miles and pounds on them.
Traduire avec GoogleUtile?
5 étoile(s) sur 5.
Excellent Result
il y a un an
This may not be the answer for every truck but it was an excellent result for my 2010 Ranger. I have had the truck over 10 years now and replaced shocks more than once and feel this is the best ride I have experienced yet. Note that these shocks do not have a nitrogen charge like most conventional twin tubes, just oil, so they do not rebound when they are compressed. My truck has a heavy cap loaded with tools so I added air helper springs to balance the sag of the load and now combined with these shocks is a perfect ride. Even without air springs I think anyone hauling loads in their truck or driving off road would greatly benefit from this product.
Traduire avec GoogleUtile?
5 étoile(s) sur 5.
Good product
il y a un an
1 étoile(s) sur 5.
Rancho customer dissatisfied with RS5000 & RS9000
il y a un an
I have had 2 sets of these RS5000 Rancho shocks replaced under the warranty with CT. Unfortunately the last set that had been replaced are now have leaky seals again. The CT service Mgr will not replace these leaky shocks under warranty even though they were replaced in his shop by his techs. After reaching out to the Rancho rep for the area as the CT Mgr will not assist me in getting these R&R, the rep is sending me back to the store for a resolution. Not going to happen with this Mgr in service. I would even accept a similar in kind shocks to eleviate the on going Rancho problem. They are not abused on the truck but it appears they are very poorly buolt with very POOR quality control before getting into the hands of the customer.
CT should review the product and discuss the departments Mgr view with assisting long time customers of this store. I have a very simular issues with the RS 9000 Ranchos on another truck. Switching product lines to Bilsten. Better product with HIGHER reviews online and in person. Avoid this Rancho product and this particular store location. Only 1 store south of Kamloops and North of Kelowna. You determine which store this is and the Mgr of service dept.
Traduire avec GoogleUtile?
5 étoile(s) sur 5.
Good Shocks!
il y a un an
Installed them on an old Cherokee and they work great! Super smooth ride. Somehow CT also has some of the best prices I could find around for them so even better!
Traduire avec GoogleUtile?
1 – 5 sur 15 commentaire
Questions
Commencez à taper votre question et nous vérifierons si elle a déjà été posée et répondue.
1 - 10 sur 12 questions
Réponses les plus utiles
Q : I ordered a pair of Rancho RS5029 shocks for the front of my 2002 Dakota. While installing, I noticed slight difference between them, and that one is stamped "RS5019." Is this for a different application?
il y a 5 ans3 Réponses
- Traduire avec Google
R : Hi, you are correct, the shocks should both be the same regardless of left & right side. Both should read RS5029, SKU 041-4216.
il y a 5 ansUtile?
Q : Would they be good for my 1987 Econoline 250 3/4 ton
il y a 6 mois2 Réponses
- Traduire avec Google
R : I can't speak to that vehicle specifically but last year I installed these on the back of my 2010 Ford Ranger Sport 4x4 with a heavy Leer cap full of tools on the back and was very pleased with the result. These are the 4th set of different rear shocks I have had on it in the 11 years I have driven it and by far the best ride quality. I think due to the heavier weight their stiffness is just perfect so with your van being a 3/4 ton I believe would be a good choice.
il y a 6 moisUtile?
Q : Do the shocks come with new nuts and bolts?
il y a 2 ans2 Réponses
- Traduire avec Google
R : Unfortunately, the shock absorbers did not come with any new bolts or nuts. I had to re-use the previous hardware on the truck.
il y a 2 ansUtile?
Q : What performance shock do you carry that would fit 2002 dodge Dakota 4dr 3.9L RWD if possible could you provide a part number as well
il y a 5 ans1 Réponse
- Traduire avec Google
R : Hi there, thank you for your question. Part # 0225555 and 0225556 should fit the front and back applications for your particular vehicle.
il y a 5 ansUtile?
Q : I have an 2003 dodge ram 1500.SLT 4x4 with factory 2 inch lift. With a 4.7. What would be the part number for the recommended Rancho shocks for the front. An rear be
il y a 5 ans1 Réponse
- Traduire avec Google
R : Hi, thank you for your question. I've provided the options below for your 2003 Dodge Ram 1500 with 4.7L & 4X4. For the Rear I would recommend using one of the following; 041-4221 RS55274 (Rancho 5000 Series) 041-7097 RS999274 (Rancho 9000 Series) For the Front, given that your vehicle uses a factory 2" lift we do not carry anything in our assortment I would recommend. However I have provided the Monroe Part #'s that you would need to source, that will fit your vehicle correctly. Monroe Rancho 5000 series - RS5373 or RS55373 specifically for trucks with factory lift of 1"-2"
il y a 5 ansUtile?
Q : What would the part number be for front shocks for 2003 dodge ram 1500 with 2 inch lift? And number for rear shocks for 2003 dodge ram 1500 with 2 inch lift?
il y a 5 ans1 Réponse
- Traduire avec Google
R : Hi, thank you for your question. I've provided the options below for your 2003 Dodge Ram 1500 For the Rear I would recommend using one of the following; 041-4221 RS55274 (Rancho 5000 Series) 041-7097 RS999274 (Rancho 9000 Series) The front is more difficult to determine. Based on our assortment coverage we do not currently offer a Rancho series for your truck with a 2" front lift. Can you confirm the engine size in the vehicle and if it is a 4wd or 2wd truck?
il y a 5 ansUtile?
Q : What would the part number be for front shocks for 1998 Jeep TJ with 2 inch budget lift? And number for rear shocks for 98 Jeep TJ with 2 inch lift?
il y a 5 ans1 Réponse
- Traduire avec Google
R : In response to your inquiry, the RS55239 Front and RS55241 Rear will be best for this 1998 Jeep TJ. Product# 34-4527 - RS55241 Product# 41-4283 - RS55239
il y a 5 ansUtile?
Q : Is there a part number stamped on these and where is it located?
il y a 6 ans1 Réponse
- Traduire avec Google
R : The part# should be stamped on the bottom of the shock above the lower mounting eyelet.
il y a 6 ansUtile?
Q : What ranch rs500 shocks fit a 2004 dodge 2500 extended cab with a diesel
il y a 6 ans1 Réponse
- Traduire avec Google
R : RS5221 (CTC# 0414224) fits the front for the below application if there is no lift kit installed. RS5269 (CTC# 0414222) fits the rear for the below application if there is no lift kit installed.
il y a 6 ansUtile?
Q : This is for a 2007 yukon 4x4 with a 5.3 What are the dimensions for the shock. ie length compressed and extended
il y a 7 ans1 Réponse
- Traduire avec Google
R : RS5262 (0344524) – Qualifier: w/o Z55 Electronic Suspension; w/o Nivomat Self-Leveling Suspension; w/o Police Package; w/o Z95 Magnetic Ride Control Vehicle Height: 0.5” Compressed Length: 15.125 Extended Length: 23.938 Travel Length: 8.813 RS5274 (0414221) – Qualifier: Use w/ Rancho RS6582B System; w/o Z55 Electronic Suspension; w/o Z95 Magnetic Ride Control; w/o ZW7 Premium Smooth Ride Suspension Vehicle Height: 4” Compressed Length: 16.250 Extended Length: 26.500 Travel Length: 10.250
il y a 7 ansUtile?
1 - 10 sur 12 questions
