NOTRE MAGASIN

Crédit Offert* EN SAVOIR PLUS

Soutien État de commande
EN
Energizer

Ensemble mural de générateur portatif Energizer

#040-1944-2
Ensemble mural de générateur portatif Energizer
139,99 $
Mieux notés

Malheureusement, cet article ne fait plus partie de l’assortiment du magasin que vous avez sélectionné et les magasins de la région.

Ces produits similaires présentés ci-dessous pourraient vous intéresser.

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

Energizer
Energizer

Ensemble mural de générateur portatif Energizer

139,99 $

Produit Détails

La solution la plus simple pour vos besoins de sauvegarde à domicile, cette trousse complète offre tout ce dont vous avez besoin pour alimenter votre génératrice portative à l'intérieur. C'est une solution sécuritaire et pratique pour alimenter les appareils les plus importants en cas de panne d'électricité.

  • Ensemble mural de générateur portatif Energizer avec une entrée à verrouillage par rotation extérieure qui reçoit l'alimentation de la génératrice et transmet l’énergie à 6 prises murales standard

  • Vous permet de fermer toutes les fenêtres et les portes en cas de conditions météorologiques difficiles pour garder le monoxyde de carbone dangereux de votre génératrice à l'extérieur

  • Composants et câblage à l'épreuve des intempéries faciles à installer en moins d'une heure

  • Voyant d'alimentation à l'extérieur vous permettant de savoir que vous pouvez aller à l'intérieur et DEL qui illuminent le plancher à l'intérieur vous aidant à naviguer dans l'obscurité

  • Comprend : Boîte d'entrée métallique à verrouillage par rotation L14-30 de 30 A et 240 V, conduit en PVC de 12 po, mèche de 1 pi, quincaillerie et vis de montage, prise murale intérieure avec 6 prises 5-15 de 15 A et 120 V

Numéro de modèle de l’article ELACEWALL30
Couleur Gris
Fini gris
Hauteur du paquet (cm) 34,50 cm
Hauteur du paquet (po) 13,58 po
Hauteur une fois assemblé (cm) 38,10 cm
Hauteur une fois assemblé (pi) 1,25 pi
Hauteur une fois assemblé (po) 15,00 po
Largeur du paquet (cm) 15,50 cm
Largeur du paquet (po) 6,10 po
Largeur une fois assemblé (cm) 12,70 cm
Largeur une fois assemblé (mm) 127,00 mm
Largeur une fois assemblé (po) 5,00 po
Longueur une fois assemblé (cm) 12,70 cm
Longueur une fois assemblé (pi) 0,42 pi
Longueur une fois assemblé (po) 5,00 po
Matériau principal En plastique
Nombre de pièces 1
Poids du paquet (kg) 1,40 kg
Poids du paquet (lb) 3,09 lb
Poids une fois assemblé (kg) 1,40 kg
Poids une fois assemblé (lb) 3,09 lb
Profondeur du paquet (cm) 19,00 cm
Profondeur du paquet (po) 7,48 po
Type dʼaccessoire pour VR Bouchon

Notre politique de retour

Consulter l’intégralité de la politique de retour

Garantie

Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.

Renseignements supplémentaires

Consulter les guides de l’utilisateur et d'autres renseignements sur les articles

Comparer des articles semblables

Only Show Differences
Ratings
CouleurGrisNoirNoirNoirNoir
Finigris
Groupe de couleurGris

Points saillants de l'evaluation

List of Avantages Highlights
List of Désavantages Highlights
Impossible de générer un Désavantages approprié pour le moment.

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
10 commentaires avec 5 étoiles.
1 commentaires avec 4 étoiles.
0 commentaires avec 3 étoiles.
1 commentaires avec 2 étoiles.
2 commentaires avec 1 étoile.

Note générale

4.1
2 commentateurs sur 3 (67%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

    Filtrer les avis

    • installation
    • qualité
    • prix
    • sécurité
    • valeur
    • décevant
    • achat
    1 to 5 sur 14 commentaire
    1 – 5 sur 14 commentaire

    Might be safe to use

    il y a un an
    Trying to find an electrician that says it's safe to use and install it in my home.
    Traduire avec Google
    Utile?

    Great Bang for your Buck

    il y a un an
    Great ¨Product, Much better than the one I was going to buy. Great Value on sale.
    Traduire avec Google
    Utile?

    Wonderful For Generator

    il y a 2 ans
    After buying an adapter and proper extension cord, this was great for hooking our generator to the house. Six receptacles on inside wall to use. It is pretty simple to install through the wall.
    Traduire avec Google
    Utile?

    Not approved by ESA

    il y a 2 ans
    My electrician told me not to use this product, or other versions like it, because it is not approved by Electrical Safety Authority of Ontario, and that you would not pass an inspection or be able to close a permit with this installed. Not sure why they sell these at all. He also told me there could be insurance issues too.
    Traduire avec Google
    Utile?

    The only drawback to the installation was the knockout.

    il y a 2 ans
    The stamping was not deep enough. I had to drill it out using a 7/8” bit . Installed 2 of these . Both had the same issue.
    Traduire avec Google
    Utile?
    1 – 5 sur 14 commentaire

    Questions

    1 - 7 sur 7 questions

    Q : Is this product csa approved?

    il y a un an
    Traduire avec Google
    3 Réponses
    • R : There is a sticker on the outdoor box. There is a circle with ETL in the middle and listed at the bottom. There is a C and a US on the outside of the circle. Below that it says Intertek and the listing number is 3126867. Below that it says CONFORMS TO ULSTD.498. On the next line it says CERTIFIED TO CSA STD.C22.2#42. I am not an engineer but simply an end-user. I cannot figure out how to attach a photo to this response, sorry.

      il y a un an
      Utile?
      Traduire avec Google

    Q : My generator has 2 x 120v 15-20 outlets and a 30 AMP RV outlet. Can I connect my generator to the inlet box in this kits if I don't have a 30 amp L14-30 outlet ? What kind of cable or adapter would I need?

    il y a 2 ans
    Traduire avec Google
    3 Réponses
    • R : Depending on your generators RV outlet, the adapter you need is either a TT-30 to L14-30 OR a L5-30 to L14-30. Either are available as a plug or a short cord adapter, myself I prefer the short cord (dogbone) adapters. The previous answer is wrong, YES you will now be able to use all 6 of the available 120v outlets inside the building.

      il y a un an
      Utile?
      Traduire avec Google

    Q : How long is the conduit as would have to be the same length as the basement thickness

    il y a 2 ans
    Traduire avec Google
    3 Réponses
    • R : Plenty long enough for any normal wall thickness; but my advice is, No Glue on pipes; not really required, and if you make a mistake with glue you have a problem. If desired you can buy extra conduit length just in case you make a mistake cutting[ Measure twice, cut once).

      il y a 2 ans
      Utile?
      Traduire avec Google

    Q : How do you get the plug out of the metal box to put the wires through. It is solid.

    il y a 2 ans
    Traduire avec Google
    2 Réponses
    • R : Hello, We can certainly assist you with this matter. Please visit our website - https://www.energizergenerators.com/ca/download-manual Please click on - Through Wall Kit - Through Wall Kit User Guide Refer to page 16 1. Remove the screw below the plastic inlet port on the metal outdoor inlet box and lift the metal faceplate up and out. Place the base of the inlet box face down on a solid surface so that the back of the box with three mounting holes is facing upwards. 2.Locate the circular knockout hole on the back of the inlet box, remove the knockout using a knockout punch set or a drill. 3. Unscrew the tightening ring from the PVC conduit fitting, leaving the insulating ring on the fitting. 4. From the back of the inlet box push the threaded end of the conduit fitting through the knockout hole. Screw the tightening ring onto the conduit fitting from the inside of the power inlet box and tighten using pliers. We hope this information helps. Best regards, Energizer Through The Wall Customer Support Team

      il y a 2 ans
      Utile?
      Traduire avec Google

    Q : Are you limited to the size of generator? ie: 10,000 watts

    il y a un an
    Traduire avec Google
    1 Réponse
    • R : The maximum power this kit can throughput is 7,500-Watts because the maximum rated power that a L14-30 outlet can provide is 30 Amps at 250 Volts. (30A x 250V = 7500W). This kit will only provide as much power as your generator supplies, if your generator supplies less than 7,500W through its L14-30 outlet this kit will be underpowered but still function normally. If your generator can only produce 110-125V through its L14-30 outlet then only the top or bottom half of the outlets on this kit will provide power, but that half will still function normally.

      il y a un an
      Utile?
      Traduire avec Google

    Q : What about a nutral ??? We don't have the place wher we put it !!

    il y a 2 ans
    1 Réponse
    • R : The neutral (white wire) inside the through-wall kit connects the indoor 6-outlet power panel to the outdoor inlet box. That connection ensures a safe neutral continuity from the through-wall kit, through your L14-30 extension cord, and back to your portable generator. To safely use the through wall kit the outlet on your portable generator must be grounded and include a breaker of 30A or less.

      il y a 2 ans
      Utile?

    Q : On page 7 of the instructions it says I can choose another location to install my inside power panel. What gauge of wire would I use. 12 or 10 gauge?

    il y a 2 ans
    Traduire avec Google
    1 Réponse
    • R : Hello Eddy, We recommend you use 10 gauge wiring since the wall kit supports up to 30A. 12 gauge wiring is only rated up to 20A whilst 10 gauge is rated up to 30A. Hope this helps and has answered your question. Cheers!

      il y a 2 ans
      Utile?
      Traduire avec Google
    Haut