NOTRE MAGASIN

Crédit Offert* EN SAVOIR PLUS

Soutien État de commande
EN
DAP

Décapant Silicone-Be-Gone

#067-0809-0
Décapant Silicone-Be-Gone
6,99 $

Malheureusement, cet article ne fait plus partie de l’assortiment du magasin que vous avez sélectionné et les magasins de la région.

Ces produits similaires présentés ci-dessous pourraient vous intéresser.

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

DAP
DAP

Décapant Silicone-Be-Gone

6,99 $

Objets similaires

Produit Détails

  • Odeur faible, n'abîme pas les surfaces ni les finis

  • Assouplit le silicone, convient à toutes les marques de scellant au silicone

  • Opaque, permet de voir où le produit est appliqué

  • Consistance de gel ne coule pas

  • 90 mL

Garantie
  • Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.
Commande en ligne
  • Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
  • Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
  • La livraison le jour même coûte 9,99 $ par commande.
  • Informations sur une commande en ligne
Retours
  • La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
  • Certains articles ne sont pas remboursables ni échangeables.
  • La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.

Comparer des articles semblables

Only Show Differences
Ratings
Types de travailsAluminium, Asphalte, Béton, Fibre de verre, Métal galvanisé, PVS, Parement de vinyleAluminium, Asphalte, Béton, Fibre de verre, Métal galvanisé, PVS, Parement de vinyleAluminium, Fibre de verre, Métal galvanisé, PVS, Parement de vinyleAluminium, Asphalte, Béton, Fibre de verre, Métal galvanisé, PVS, Parement de vinyle
Forme chimiqueCalfeutrageCalfeutrageCalfeutrageCalfeutrage
Matériau principalLatexÉlastomèreLatex acryliqueLatex

Points saillants de l'evaluation

List of Avantages Highlights
List of Désavantages Highlights
Impossible de générer un Désavantages approprié pour le moment.

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
2 commentaires avec 5 étoiles.
3 commentaires avec 4 étoiles.
0 commentaires avec 3 étoiles.
0 commentaires avec 2 étoiles.
1 commentaire avec 1 étoile.

Note générale

3.8
5 commentateurs sur 6 (83%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

    Filtrer les avis

    • enlèvement
    • temps d'attente
    • petit
    • épais
    • instructions
    • achat
    • emballage
    1 to 5 sur 6 commentaire
    1 – 5 sur 6 commentaire

    Worked as advertised

    il y a 12 ans
    Excellent. Softens the old silicone so it can be "scraped" away. Important to first removed the bulk of the silicone bead with a utility knife (or?). I missed a couple of small spots and the Silicone-Be-Gone softened the silicone and it came off okay, but the less residue, the better. Where the silicone was mostly removed before application, it wiped and scraped of easily. The label says "wait 2 hours" and I agree. Tried a small section after 90 minutes and waiting two hours was the way to go. Very good. ☺
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?

    Did you hear that???

    il y a 12 ans
    I think I hear angels singing! LOL! Ok, so I've removed a whole bunch of three inch laminate backsplash, and am now looking at the equivalent of about 75 linear feet of silicone...on walls and countertop. WORST. JOB. EVER. I have scraped, razored, tried to bribe...yeah, this job was going to take the rest of my life. I bought a bottle of this stuff as a hail mary play. Opened it and thought, REALLY? It was like really bad jam with way too much gelatin in it. It was brown. It was gross. I thought for sure it was old and dried up. But I put some on a short stretch, and figured it might at least help. WOW! After leaving for 2 hours, it scraped off so easily!!! New hope that my job will get finished!!! YAY!!! I realize it might take a couple of jars. But so what? This stuff made an IMPOSSIBLE job possible. Even a thicker bead came away no problem, with minimal elbow grease. One tip I read somewhere was to cover with saran while waiting the 2 hours, so it wouldn't dry out. I did that, as it said that if it dries during the wait time you have to reapply. Yeah right. Not gonna happen. So the saran did the trick. I think an artist's palate knife might be easier to apply it than the little brush it comes with, and I will do that when I am ready to do more removal. The only reasons that I can think of that it doesn't work for some is that either the caulking they are trying to remove is not silicone, or that they allow the gel to dry out? Definitely worth every penny! And then some!
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?

    Works as Advertised

    il y a 14 ans
    This stuff softens silicone so it is much easier to scrape away. Before applying, remove as much silicone as you can (plastic scraper or whatever), then apply this stuff generously, and wait 2 hours. The remaining silicone that was hard to remove at first is now easy to scrape away. I recommend a small 1/2 inch paintbrush. The one provided is far too small. Clean-up is easy as this stuff is water soluble. Wear rubber gloves. (If it can soften silicone, imagine what it could do to skin!)
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?

    Makes it easier

    il y a 14 ans
    The product helped, but just don't expect it to do the whole job for you. You're not going to be able to miraculously wipe it off. As the instructions indicate, it merely softens the silicone to make it easier to remove. I cut away what I could & then found it difficult to scrape the rest off of the ceramic tile. After applying the product (& waiting the recommended 2 hours) it was much easier to scrape the rest off with a putty knife. So, if you've got the time & patience, the product does what it claims.
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?

    Maybe I did something wrong

    il y a 16 ans
    Removed as much old silicone as I could, then followed the instructions to a T. Seems to me this product didn't remove any of the remaining silicone. Would not recomend it,
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?
    Réponse de DAPProductExpert :
    il y a 7 ans
    DAPProductExpert
    Thank you for posting your feedback. We're sorry to hear about your experience with DAP Silicone-Be-Gone. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you about your project and provide you with the guidance you need to move forward. DAP
    1 – 5 sur 6 commentaire

    Aucune question n'a été posée sur ce produit.

    Questions

    4 étoiles et plus

    Haut