NOTRE MAGASIN

Crédit Offert* EN SAVOIR PLUS

Soutien État de commande
EN
Rust-Oleum

Revêtement pour garage à polyurée Rock Solid, gris, 3,75 kg

#048-9750-8
149,99 $

Malheureusement, cet article ne fait plus partie de l’assortiment du magasin que vous avez sélectionné et les magasins de la région.

Ces produits similaires présentés ci-dessous pourraient vous intéresser.

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

Rust-Oleum
Rust-Oleum

Revêtement pour garage à polyurée Rock Solid, gris, 3,75 kg

149,99 $

Produit Détails

  • Revêtement pour garage à polyurée Rock Solid de qualité industrielle qui ne requiert aucun mélange ni mesure, il suffit de secouer, verser et appliquer

  • On peut marcher sur la surface dans les 4 à 8 heures qui suivent et passer en voiture 24 heures après l'application

  • Comprend : livret d'instructions, Safe-Etch Solution, rouleau de mousse, sachet de revêtement pour le garage, pastille décorative et la teinte gris

  • 3,75 kg

Numéro de modèle de l’article 282151
Type de peinture Peinture de sol/maçonnerie pour l’extérieur
Types de travails Planchers et porches
Fini de la peinture Plat
Taille du contenant de peinture 946 mL (1 pinte)
Surface maximale de couverture de la peinture (pi²) 43 pi²
Surface maximale de couverture de la peinture (m2) 4 m²
Niveau de COV de la peinture Aucun COV
Garantie
  • Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.
Commande en ligne
  • Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
  • Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
  • La livraison le jour même coûte 9,99 $ par commande.
  • Informations sur une commande en ligne
Retours
  • La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
  • Certains articles ne sont pas remboursables ni échangeables.
  • La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.

Comparer des articles semblables

Only Show Differences
Ratings
Type de peinturePeinture de sol/maçonnerie pour l’extérieurPeinture de sol/maçonnerie pour l’intérieur/l’extérieurPeinture de sol/maçonnerie pour l’intérieur/l’extérieurPeinture de sol/maçonnerie pour l’intérieurPeinture de sol/maçonnerie pour l’intérieur/l’extérieur
Types de travailsPlanchers et porchesPlanchers et porches, BétonPlanchers et porches, BétonPlanchers et porches, BétonBéton
Fini de la peinturePlatTrès lustréTrès lustréRevêtement supérieurSatiné

Évaluations

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Rédiger le premier commentaire

Questions

1 - 6 sur 6 questions

Q : We have applied epoxy to our floor in our house and it scratches easily. We want to sand and apply a final coat, will this scratch from dog claws and moving furniture?

il y a 5 ans
Traduire avec Google
1 Réponse
  • R : Hi Heatherc, While the coating is tough, it can be scratched from dog's nails if they are long and from moving furniture. When moving furniture, you should still avoid dragging it across the floor. If 7 days has surpassed from your last coat, we recommend cleaning the floor if it was used, scuff sand lightly with 60-80 grit sand paper, remove the sanding dust and reapply your final coat. We hope this new information it helpful.

    il y a 5 ans
    Utile?
    Traduire avec Google

Q : Can this product be put over Armour Coat enamel paint?

il y a 9 ans
Traduire avec Google
1 Réponse
  • R : The Armor Coat enamel paint is not a floor coating, so we wouldn't recommend that Rock Solid be applied over it. Rock Solid can be applied over an existing floor paint, provided the surface is cleaned well, and scuffed with 60 grit sandpaper first. If the surface is a garage floor, the existing paint should also be a garage floor coating, capable of withstanding vehicle traffic. If it is not, we'd recommend the paint be removed before the floor is coated with Rock Solid.

    il y a 9 ans
    Utile?
    Traduire avec Google

Q : can this product be used to level a dip in the garage floor? My garage floor has a slight dip/depression that's roughly 1/2" deep over approximately 6 square feet of area. Can this product be used to fill in the depression while coating the entire surface?

il y a 11 ans
Traduire avec Google
1 Réponse
  • R : The Rock Solid coating is designed to coat a surface, but will not fill major depressions, or gaps.

    il y a 11 ans
    Utile?
    Traduire avec Google

Q : Can it be applied on an epoxy floor?

il y a 12 ans
Traduire avec Google
1 Réponse
  • R : yes we have had good success bonding to an existing epoxy floor coatings by scuff sanding and solvent wiping, then applying our coating system. The potential customer should consider the following when recoating: 1) We will stick to the epoxy, but is the existing epoxy sticking to the concrete? If the existing epoxy is delaminating, then the entire coating system should be ground off. 2) Is the existing wearing off? The bare concrete area need to be prepped. In this instance, there might not be enough coating to bond to and the entire coating system should be ground off. 3) If the existing coating system is in good shape but just needs help on cosmetics, the potential customer could scuff sand with a 80 grit to get an anchor profile. They should then vacuum, leaf blow and solvent wipe with acetone to remove all of the contaminants before applying a new coating system. Make sure the customer is extra safe when using acetone – Respirator, Safety glasses, protective clothing and gloves. Also, this is a flammable solvent, no open flames during use.

    il y a 12 ans
    Utile?
    Traduire avec Google

Q : After applying Rock Sold Garage Coating Grey is it necessary for durability to aditionally purchase and apply the Top Coat product? Is the purpose of Top Coat durability when applied over Grey Garage Coating or only for a high gloss finish?

il y a 12 ans
Traduire avec Google
1 Réponse
  • R : The Rock Solid Garage Coat is designed as a one coat application. The clear coat is optional. About 20% of the vendor’s customer base purchase the optional clear coat to add extra durability. These customers are typically owner of high end garages or shops where they are constantly working on their cars.

    il y a 12 ans
    Utile?
    Traduire avec Google

Q : Will this cover 350 sq.ft garage floor ? I have a double garage approx 350sq.ft. How much does this product cover ?

il y a 12 ans
Traduire avec Google
1 Réponse
  • R : 489750 RockSolid Gray Garage Coat Kit will cover 250 sf (average size of a single stall garage) For the customers 350 square foot garage, they will need two kits.

    il y a 12 ans
    Utile?
    Traduire avec Google

4 étoiles et plus

Haut