À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.
Objets similaires
Produit Détails
Garantie
- Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie limitée Canadian Tire.
Commande en ligne
- Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
- Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
- La livraison le jour même coûte 9,99 $ par commande.
- Informations sur une commande en ligne
Retours
- La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
- Certains articles ne sont pas remboursables ni échangeables.
- La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.
Comparer des articles semblables
Only Show Differences | Consultation en cours | |||||
| Ratings | ||||||
| Liste d’accessoires | Boîtier | Étui de transport | Étui de transport | Aucun accessoire inclus | ||
| Fonctionnalités avancées | Durable | Résistant à la rouille, À cliquet | Prise confortable, Résiste à la corrosion, Prise ergonomique, Rangement des outils | Résistant à la rouille, À cliquet |
Acheter des produits connexes
- Offres hebdomadaires
- Les clients ont aussi consulté
- Vers les produits tendances
- Plus de cette marque
Offres hebdo
Points saillants de l'evaluation
List of Avantages Highlights
Avantages
List of Désavantages Highlights
Désavantages
Impossible de générer un Désavantages approprié pour le moment.
Évaluations
Filtrer les avis
- fonctionnel
- achat
- prix
- batterie
- la satisfaction
- garantie
- précision
- qualité
Cote
Paramètre régional
1 to 5 sur 12 commentaire
1 – 5 sur 12 commentaire
Les plus récents
1 étoile(s) sur 5.
Obsolescence précoce article 058-8900-4
il y a 7 ans
L'appareil acheté il y a +- 2 ans,
Servi à moins de 12 fois,
Batterie 3 v pour fonctionner à 100% de capacité,
Ne fonctionne plus,
Ne veut plus ouvrir pour mesurer.
Déçu +++
Non, Je ne recommande pas ce produit.
Utile?
1 étoile(s) sur 5.
don't waste your money
il y a 8 ans
Just buy a proper torque wrench. Tried the 1/2" adaptor, it would randomly turn itself off as your trying to tighten the bolts, great way to warp a clutch disc.....
Traduire avec GoogleNon, Je ne recommande pas ce produit.
Utile?
1 étoile(s) sur 5.
recommande pas
il y a 8 ans
marchais bien pendant 2 jour apres sa marquais batterie low
Non, Je ne recommande pas ce produit.
Utile?
4 étoile(s) sur 5.
Not my best buy
il y a 9 ans
This isn't my best purchase at CT. This doesn't work consistently for me, my son has great luck, uses it all the time. I have trouble getting it to perform every time when I'm doing lug nuts, usually I can't hear it. Maybe cause I'm half deaf but still makes it inconvenient for me.
Traduire avec GoogleNon, Je ne recommande pas ce produit.
Utile?
4 étoile(s) sur 5.
Handy, especially at a reduced price.
il y a 9 ans
I picked up the 1/2" model to check my mechanical torque wrenches. This looks to be the Taiwan-made adapter many companies bring in under their label, and CT's price this week was competitive, so it was an easy decision. Depending who brings it in, the units claim anywhere from 1% to 2-3% accuracy. CT claims 2% for theirs, which is good enough for me. Unfortunately mine came with a nearly dead battery, so I'll have to ask CT for a fresh CR2032. With the low battery I could still use the "peak" torque measurement, just not the lights/sounds method. I tested 3 torque wrenches and the adapter was consistent and came close to matching the quality measurements the manufacturers supply with each mechanical wrench. The molded plastic case it comes with is good enough to protect the adapter, and has a real hinge which is nice, but it's a little too big inside so the adapter will rattle around unless you put a small rag or something in with it. Buttons are a bit fiddly to use and the display is upside-down for how you'd read it on a wheel lug or under a car, but that's minor. I'll rarely use this as a wrench as I doubt the electronics are durable enough for heavy use, but there will be tight spaces where it'll come in handy. Some companies who import this adapter supply it with a special socket you can clamp in a vise to make wrench testing easier-- I wish CT did this, because to my mind that's the most useful purpose of this device.
Traduire avec GoogleOui, Je recommande ce produit.
Utile?
1 – 5 sur 12 commentaire
Questions
Commencez à taper votre question et nous vérifierons si elle a déjà été posée et répondue.
1 - 10 sur 24 questions
Réponses les plus utiles
Q : does this measure as low as 4 inch lbs?
il y a 12 ans3 Réponses
- Traduire avec Google
R : No. The 1/2" model bottoms out at 360 inch lbs (30 ft-lbs). I tried testing a light wrench down to 240 inch lbs (20 ft-lbs) with the 1/2" model and it was surprisingly accurate though. The 3/8" model claims to bottom out at 240 inch lbs. Maybe it's the same strain gauge for both units, just the physical attachments and calibration that differs.
il y a 9 ansUtile?
Q : Can it be used with an impact wrench? Dumb question from a not-so-handy person. As titled, can it be used with an impact wrench?
il y a 14 ans3 Réponses
- Traduire avec Google
R : I would say... heck no! You'd wreak it in 2 seconds.
il y a 14 ansUtile?
Q : Torque readings under 20 ft-lb I see the readout shows zero ft-lbs at rest. Has any one tested the accuracy of the device at torques under 20 ft-lbs. Even if the device doesn't beep I'm thinking I can just watch the readout and stop tightening when it reads 15 ft-lbs.
il y a 15 ans3 Réponses
- Traduire avec Google
R : I have an inch/lb 1/4" drive standard torque wrench that is quite accurate. When checked against the 3/8" drive adaptor, the readings coincided exactly.
il y a 14 ansUtile?
Q : Breaker Bar Can I use a breaker bar with this or does it only have to be a socket wrench? http://www.canadiantire.ca/AST/browse/6/Tools/Sockets/RatchetHandles/PRD~0589188P/Mastercraft+Maximum+Ratcheting+Breaker+Bar.jsp?locale=en
il y a 13 ans2 Réponses
- Traduire avec Google
R : Yes, that's what I use. It is more comfortable than a socket wrench. Just use your hands to torque, not your foot and do not exceed 150 ft-lbs.
il y a 10 ansUtile?
Q : Can I use the 3/8 to torque lugnuts on tires? What is the max torque on the 3/8?
il y a 14 ans2 Réponses
- Traduire avec Google
R : You would be much better off using a 1/2" adapter on a breaker bar / lug wrench for doing your lug nuts. Depends on your vehicles torque spec and if you have a socket for 3/8" that fits your lug nuts. At a maximum of 99 ft lbs of torque this would allow you to do them on various cars but not all and it also depends on your socket set. In order to do it right you would need a 1 foot cheater pipe to give more leverage probably. If in doubt use the lug wrench provided by the manufacturer of the vehicle as they are designed to give the right amount of torque when sufficient force is applied.
il y a 14 ansUtile?
Q : What is the min and max ratings for 1/2 inch tool? The 3/8" tool rating is 20ft.lbs to 99ft.lbs.The high end is good but it would be nice if it measured lower than 20ft.lbs for small equipment work. What is the min and max ratings for 1/2 inch drive model?
il y a 15 ans2 Réponses
- Traduire avec Google
R : 1/2" drive model is 30-147.5 foot-pounds (40-200 Nm)
il y a 14 ansUtile?
Q : Accuracy of this tool How accurate is this tool? Conventional torque wrenchs come with a spec sheet inside that tells how precise the actual torque is vs the setting and is done @ 3 intervals: low-end/mid/high-end/ I would like to know the same thing about this device.
il y a 15 ans2 Réponses
- Traduire avec Google
R : My 1/2" unit came with a spec sheet. I've compared the readings at various stages to my 3/8" adaptor, & they're nearly spot-on
il y a 14 ansUtile?
Q : I have used this Torque Adapter for years and it makes torqueing simple. However, the last time used it stopped working. I installed a new battery and it is still not working. Is there some kind of reset?
il y a 4 ans1 Réponse
- Traduire avec Google
R : No reset. You should be able to return to your local store for a refund, we are unable to exchange as they are no longer manufactured.
il y a 4 ansUtile?
Q : Does this work for reverse threads too?
il y a 8 ans1 Réponse
- Traduire avec Google
R : No, this is not recommended to be used on reverse threads.
il y a 8 ansUtile?
Q : does it register a rotating torque
il y a 8 ans1 Réponse
- Traduire avec Google
R : It measures the amount of torque being applied to a fastener in ft-lb, in-lb, N-M, or cm-kg.
il y a 8 ansUtile?
1 - 10 sur 24 questions
