NOTRE MAGASIN

Crédit Offert* EN SAVOIR PLUS

Soutien État de commande
EN
MAXIMUM

Tournevis magnétiques MAXIMUM, 33 pièces

#057-3418-6
Tournevis magnétiques MAXIMUM, 33 pièces
37,99 $
Exclusivité

Malheureusement, cet article ne fait plus partie de l’assortiment du magasin que vous avez sélectionné et les magasins de la région.

Ces produits similaires présentés ci-dessous pourraient vous intéresser.

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

MAXIMUM
MAXIMUM

Tournevis magnétiques MAXIMUM, 33 pièces

37,99 $

Produit Détails

Tournevis magnétiques MAXIMUM à embouts en acier durci S2, 3 fois plus durables que les tournevis au chrome vanadium standard

  • Surface d'oxyde noir

  • Résistant à la rouille

  • Comprend 33 pièces

  • Comprend 33 pièces

Numéro de modèle de l’article FLS-047
Hauteur du paquet (cm) 5,00 cm
Hauteur du paquet (po) 1,97 po
Largeur du paquet (cm) 22,00 cm
Largeur du paquet (po) 8,66 po
Poids du paquet (kg) 1,03 kg
Poids du paquet (lb) 2,27 lb
Profondeur du paquet (cm) 14,30 cm
Profondeur du paquet (po) 5,63 po
Garantie
  • Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie limitée Canadian Tire.
Commande en ligne
  • Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
  • Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
  • La livraison le jour même coûte 9,99 $ par commande.
  • Informations sur une commande en ligne
Retours
  • La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
  • Certains articles ne sont pas remboursables ni échangeables.
  • La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.

Comparer des articles semblables

Only Show Differences
Ratings
Hauteur du paquet (cm)5,00 cm
Hauteur du paquet (po)1,97 po
Largeur du paquet (cm)22,00 cm

Points saillants de l'evaluation

List of Avantages Highlights
List of Désavantages Highlights
Impossible de générer un Désavantages approprié pour le moment.

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
1 commentaires avec 5 étoiles.
1 commentaires avec 4 étoiles.
1 commentaires avec 3 étoiles.
0 commentaires avec 2 étoiles.
1 commentaire avec 1 étoile.

Note générale

3.3
2 commentateurs sur 4 (50%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

    Filtrer les avis

    • prix
    • valeur
    • nettoyage
    • corrosion
    • bois
    • forage
    • retours
    1 to 4 sur 4 commentaire
    1 – 4 sur 4 commentaire

    Good, got what I wanted.

    il y a 7 ans
    By itself, the kit is okay and worth getting on sale (60%). There's a good selection of bits but the handle I got is different from the picture, tri-lobe shaped. The bits are not magnetic, and the magnet in the shaft is too weak to hold the bits securely. There was a fair bit of oil/grease on the bits, perhaps to protect them from rust and I cleaned it with a rag. I expected the above but I was looking exactly for this kind of kit so for me, it was 5/5 stars. I epoxied a quick change bit adapter to the handle and that took care of securely holding any standard insert or power bit or extension. The bits themselves are S2 tool steel standard power bits and can be used in drill/drivers or even impact drivers for wood screws into soft woods. Today I used one of them with my drill to disassemble a muskoka chair, about 50 Philips screws, and based on the wear, I'd say they're good for around 200 power driven screws. Not bad.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?

    Good value on sale

    il y a 8 ans
    I looked a long time for a value pack of decent length bits with a good variety. I've learned from experience that Canadian Tire bits will rust horrendously when exposed to dampness for too long. I'll just keep these indoors when I'm not using them.
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?

    Great little unit!!

    il y a 9 ans
    Comes with the popular bit sizes!! The bits were a little hard to remove but I am sure over time it will get easier. No issues with any breaking!! Great looking box too!!! Handle works well. Even with some extra muscle torqueing ! Highly recommend!
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?

    Dissappointing at best.

    il y a 9 ans
    I was quite dissappointed to learn ONLY the driver is magnetic, not the bits. This is not what I believed when I read the label. It should have been made clear that the "Bits are NOT magnetic". I have tons of bits and screwdrivers. I wanted magnetic ones. I guess I'll just take it back.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?

    Questions

    1 - 4 sur 4 questions

    Q : Are these bits able to be used in an impact driver? There are 2 different answer by CT Team, one list them as Impact bits the other says they can't be used except with a handle as a screwdriver. Can these bits be used in a drill/driver or impact driver or are they limited to use with supplied handle?

    il y a 8 ans
    Traduire avec Google
    1 Réponse
    • R : These are not impact bits.

      il y a 8 ans
      Utile?
      Traduire avec Google

    Q : Can I use these with my Maximum 20 W Impact driver or Power Drill? Can I use these with my Maximum 20 W Impact driver or Power Drill? Do I need an adapter or another piece to make this happen?

    il y a 8 ans
    Traduire avec Google
    1 Réponse
    • R : The bits in this set are designed to fit in the driver handle provided. You can not use these bits in an Impact Driver or a Power drill.

      il y a 8 ans
      Utile?
      Traduire avec Google

    Q : Are the bits magnetic? Are the bits magnetic? Because I work in the computer industry, and I need to remove screws within laptops. So I need a screwdriver that will hold onto the screws as a insert and remove them.

    il y a 9 ans
    Traduire avec Google
    1 Réponse
    • R : Yes they are

      il y a 9 ans
      Utile?
      Traduire avec Google

    Q : what are size of bits

    il y a 10 ans
    Traduire avec Google
    1 Réponse
    • R : 3“ PH1 Impact Bit 1 3“ PH2 Impact Bit 3 3“ PH3 Impact Bit 2 3“ SQ1 Impact Bit 1 3“ SQ2 Impact Bit 3 3“ SQ3 Impact Bit 2 3“ P2R Impact Bit 1 3“ SL1/8 Impact Bit 1 3“ SL5/32 Impact Bit 1 3“ SL3/16 Impact Bit 1 3“ SL7/32 Impact Bit 1 3“ SL1/4 Impact Bit 1 3“ SL9/32 Impact Bit 1 3“ TORX T8 Impact Bit 1 3“ TORX T10 Impact Bit 1 3“ TORX T15 Impact Bit 1 3“ TORX T20 Impact Bit 1 3“ TORX T25 Impact Bit 1 3“ TORX T27 Impact Bit 1 3“ TORX T30 Impact Bit 1 3“ TORX T40 Impact Bit 1 3“ H3/32 Impact Bit 1 3“ H1/8 Impact Bit 1 3“ H5/32 Impact Bit 1 3“ H3/16 Impact Bit 1 3“ H7/32 Impact Bit 1

      il y a 10 ans
      Utile?
      Traduire avec Google
    Haut