NOTRE MAGASIN

Crédit Offert* EN SAVOIR PLUS

Soutien État de commande
EN

Danze Sheridan

Robinet bain-douche Danze, 3 manettes

#063-3955-0
Robinet bain-douche Danze, 3 manettes
159,99 $

Malheureusement, cet article ne fait plus partie de l’assortiment du magasin que vous avez sélectionné et les magasins de la région.

Ces produits similaires présentés ci-dessous pourraient vous intéresser.

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

Danze Sheridan

Danze Sheridan

Robinet bain-douche Danze, 3 manettes

159,99 $

Produit Détails

  • Robinet de baignoire et douche élégant

  • Levier en porcelaine

  • Pomme de douche un réglage

  • Fini chrome

  • Cartouche 1/4 tour sans rondelle, garantie anti-goutte

  • CSA

Garantie
  • Cat article est couvert par une garantie spéciale. Pour de plus amples renseignements sur la garantie, rendez-vous à votre magasin Canadian Tire.
Commande en ligne
  • Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
  • Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
  • La livraison le jour même coûte 9,99 $ par commande.
  • Informations sur une commande en ligne
Retours
  • La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
  • Certains articles ne sont pas remboursables ni échangeables.
  • La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
2 commentaires avec 5 étoiles.
1 commentaires avec 4 étoiles.
0 commentaires avec 3 étoiles.
1 commentaires avec 2 étoiles.
5 commentaires avec 1 étoile.

Note générale

2.3
3 commentateurs sur 8 (38%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

    Filtrer les avis

    • achat
    • qualité
    • installation
    • tournant
    • laiton
    • chrome
    • coupe
    • sciage
    1 to 5 sur 9 commentaire
    1 – 5 sur 9 commentaire

    Garbage

    il y a 3 ans
    cartridges always stripping and busting, screws bending, handles busting. Have to contact support@globalunion.com for any replacement parts. Every 6 months busting. Good luck trying to find anything that fits the valves behind wall. DO NOT GET
    Traduire avec Google
    Utile?

    better than the ratings

    il y a 8 ans
    If you are replacing an older tub set that clamps the fixture from the tub side, this unit doesn't work that way. You clamp it from the stud side and the posts simply push through the old holes. The decorative flanges just push onto the exposed hot/cold/shower posts. The only clamping available is with the tub spigot, make sure that you buy a nipple short enough. I see quite a few negative reviews from people who really shouldn't be doing it themselves. A shame.
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?

    returning these

    il y a 11 ans
    bought these to install in our bathroom as my wife liked the look of them. After tearing out the wall and buying a new tub surround I got looking at the taps and realized they would not go threw the drywall. a rectangular hole would have to be cut as the threads for the chrome covers is less then 1/4 inch. even with just the surround thickness it only gives two turns to hold the escutcheon on. Furthermore the center sleeve threads are not defective and will not hold the diverter tight. Having so little thread on these taps is just bad designing.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?

    requires frequent repair

    il y a 13 ans
    This set came with the house we purchased and I've had to change the plastic cartridges many times. My current problem is that the diverter is sending water into the wall behind the fixtures. !!! The black plastic cap that sits within the brass plumbing is wrecked. A trip to my local store netted nothing (I was slightly surprised as I had to make this repair about five years ago.) Because it's a Danze product, CTC is the only place one can hope to get replacement parts. I will check at a different store tomorrow, but if it really isn't available my options are to purchase an entirely different faucet/shower set and have to tear out that portion of the shower wall, or spend $150 on this very set just to get the black plastic piece, but avoid tearing apart the wall.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?

    Quality not there

    il y a 15 ans
    Don't recommend these are the handles on ours are falling apart.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?
    1 – 5 sur 9 commentaire

    Questions

    1 - 7 sur 7 questions

    Q : size "centre to centre" is not listed. i need 11 inch centre. size is missing. centre to centre is the usual mode.

    il y a 12 ans
    Traduire avec Google
    2 Réponses
    • R : these have an 8 inch center that is the standard for most taps. I had the same as you before and could not find anything to fit.

      il y a 11 ans
      Utile?
      Traduire avec Google

    Q : Is the shower/tub handle included? Product # 63-3955-0 Danze Tub & Shower The photo shows the shower/tub handle, but the description or features do not indicate the shower/tub handle, being provided. Thank you in advance.

    il y a 16 ans
    Traduire avec Google
    2 Réponses
    • R : Yes, but being very soft plastic where it connects, it doesn't stay on for long without stripping and turning round and round.

      il y a 15 ans
      Utile?
      Traduire avec Google

    Q : Are these taps temperature controlled or pressure balanced?

    il y a 11 ans
    Traduire avec Google
    1 Réponse
    • R : All the three handle tub shower handles are not temperature controlled or pressure balanced, due to the fact there are 2 handles to control water flow.

      il y a 11 ans
      Utile?
      Traduire avec Google

    Q : Does CTC have Danze replacement diverter cartridges? The product model was Cleopatra (something like the present Bannockburn model on Danze website). See photo of my existing installation attached.

    il y a 11 ans
    Traduire avec Google
    1 Réponse
    • R : Canadian Tire may have replacement parts, However you may also contact the manufacture for parts at 1-800-487-8370.

      il y a 11 ans
      Utile?
      Traduire avec Google

    Q : Does CTC have Danze replacement diverter cartridges? Purchased from CTC a number of years ago, I have Danze 3-handle wall mount tub and shower faucets. I need a diverter replacement cartridge. Can I find same at CTC or do I have to contact Danze in the USA (seems not in Canada)?

    il y a 11 ans
    Traduire avec Google
    1 Réponse
    • R : Please call 1 800 487-8372 for assistance.

      il y a 11 ans
      Utile?
      Traduire avec Google

    Q : Est-ce garanti à vie et sinon combien de temps?

    il y a 14 ans
    1 Réponse
    • R : Garantie à vie limitée contre les défauts de matériaux, de fabrication et de fini, dans des conditions normales d'utilisation à des fins non commerciales avec votre preuve d'achat.

      il y a 13 ans
      Utile?

    Q : Les mesures entre les manettes et aussi le robinet En d'autres mots je veux m'assurer si je peux remplacer mon ancienne robinetterie sans faire de nouveaux trous.

    il y a 17 ans
    1 Réponse
    • R : Les poignées sont de 8" à part. Voir le schéma ci-dessous.

      il y a 13 ans
      Utile?
    Haut