Grand solde de pneus pour pour camions. Jusqu'à 25 % de rabais sur certains pneus pour camions et VUS de grandes marques.

Magasinez

🎒✏️📒Le Retour en classe commence ici. Faites le plein de fournitures scolaires, d'articles technologiques, de sacs à dos et plus.📒✏️🎒

Magasinez

Obtenez 2 $ de prime en Argent CTMD* sur 25L et plus d'essence les mardis chez Essence+ ou Petro-Canada. *Des conditions s’appliquent.

En savoir plus

Les membres du programme Récompenses Triangle obtiennent une expédition locale GRATUITE sur toutes les commandes de livraison à domicile admissibles d’une valeur de plus de 99 $ !

Crédit Offert Soutien
EN
Crédit Offert Soutien
EN
EasyHeat

Ensemble de câbles de commande EasyHeat pour le toit Sentry de Icing, contrôle l'humidité et la température, 120V

#052-2599-0
109,99 $
Exclusivité
Achetez-le en ligne :
Ramassage à Leduc, AB
5 En stock
Ramassage gratuit, 25 $ et plus (avant taxes)

Ramassage disponible à 09 h 00, 12 sept.

Quantité mise à jour à 1
Nouveaux paiements numériques disponibles à la page de paiement
Trouvez-le également en magasin:

Il n’en reste que 5 

au Leduc, AB
Allée 54
Ajouter au registree

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

EasyHeat
EasyHeat

Ensemble de câbles de commande EasyHeat pour le toit Sentry de Icing, contrôle l'humidité et la température, 120V

109,99 $

Produit Détails

Ensemble de câbles de commande de dégivrage EasyHeat pour le toit Sentry doté d'une installation facile et d'une commande automatique de dégivrage. Le capteur électronique de pointe surveille la température et l'humidité sur votre toit, et active le câble de chauffage inclus seulement lorsque nécessaire pour faire fondre la glace et la neige. Le capteur et l'unité de commande s'installent rapidement et facilement, ce qui vous permet d'éviter de pelleter manuellement et de déglacer les barrages coûteux.

  • Reliez vos câbles de dégivrage ensemble à l'aide de la commande de dégivrage de toit EasyHeat Sentry

  • Capteurs mesurent la température et l'humidité du toit

  • Le contrôle est logé dans une unité en plastique blanc

  • Respecte les normes CSA

  • Alimentation : 120 volts

  • Facile à installer, modèle à brancher

Numéro de modèle de l’article RS2
Certifications Conforme aux normes CSA, Conforme aux normes UL
Couleur principale Blanc
Fonctionnalités avancées Fiche de mise à la terre, Résiste aux intempéries
Fonctionnalités avancées Fiche de mise à la terre, Résiste aux intempéries
Indice de protection minimal (°C) -40,00 °C
Indice de protection minimal (°F) -40,00 °F
Intensité 10 A
Intensité 10 A
Liste d’accessoires Thermostat
Longueur une fois assemblé (cm) 20,32 cm
Longueur une fois assemblé (pi) 0,67 pi
Longueur une fois assemblé (po) 8,00 po
Poids une fois assemblé (kg) 0,90 kg
Poids une fois assemblé (lb) 1,98 lb
Puissance 1200 W
Tension (V) 120 V
Type de câble de chauffage Câble chauffant de toit
Type de voyant lumineux Alimentation
Garantie:
  • Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.
Commande en ligne
  • Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
  • Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
  • La livraison le jour même coûte 9,99 $ par commande.
  • Informations sur une commande en ligne
Retours
  • La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
  • Certains articles ne sont pas remboursables ni échangeables.
  • La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.

Comparer des articles semblables

Only Show Differences
Ratings
CertificationsConforme aux normes CSA, Conforme aux normes UL---
Couleur principaleBlanc---
Fonctionnalités avancéesFiche de mise à la terre, Résiste aux intempériesFiche de mise à la terre, Résiste aux intempériesSans fonctionnalités avancéesRésistant à la rouille
Lorsque nous avons des recommandations d'articles à vous montrer, elles apparaîtront ici!

Points saillants de l'evaluation

List of Avantages Highlights
List of Désavantages Highlights
Impossible de générer un Désavantages approprié pour le moment.

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
6 commentaires avec 5 étoiles.
1 commentaires avec 4 étoiles.
3 commentaires avec 3 étoiles.
1 commentaires avec 2 étoiles.
1 commentaire avec 1 étoile.

Note générale

3.8
6 commentateurs sur 9 (67%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

Filtrer les avis

  • installation
  • neige
  • instructions
  • la satisfaction
  • service après-vente
  • achat
  • retours
  • personnel
1 à 5 sur 12 commentaire.
1 – 5 sur 12 commentaire

Doesn't work.

il y a 7 mois
It would not turn on when supposed to. Called the help line. Wasnt very helpful. Returned.
Utile?

Not working-yet

il y a 9 mois
I bought this and my wires are sitting under 4 inches of ICE. I asked Gemini AI why and it said because my overhang was so small, 8 inches, that the "V" I made did not have enough of the sensor wire to set of the moisture censor. So, the AI said my solution was to run more sensor wire through the first 8 inches of my roof. IE I will run it through 3 or 4 little Vs then spike the remainder straight up (the remainder's tip has the temperature censor). So, not working NOW, maybe next winter.
Utile?

à l'essais

il y a 3 ans
Installé mais pas essayé, à première vue bonne qualité. Je commenterai au printemps
Utile?

This thing is awesome! Makes roof heating cable an install and forget item! JUST WORKS!

il y a 3 ans
It makes your heating cable an install and forget item... just turns on when it detect water on roof or in gutters, so never have to think about or be there to turn the heating cable on or off.. JUST WORKS! AWESOME! Must have accessory for your heating cable!

Oui, Je recommande ce produit.

Utile?

No help from store staff

il y a 3 ans
Had to return the products after reading instructions at home. It turns out that the product is probably correct for what I want, but even after reading the instructions, I was not sure that this would work for me

Non, Je ne recommande pas ce produit.

Utile?
1 – 5 sur 12 commentaire

Questions

1 - 10 sur 10 questions

Q : Can you install this product in the winter when ice has formed already? i have ice dams causing water to leak.

il y a 5 ans
Traduire avec Google
4 Réponses
  • R : I'd suggest contacting Emerson Easyheat online support to ask about this situation. They've been helpful when i've had to contact them in the past.
    il y a 5 ans
    Utile?
    Traduire avec Google

Q : Is this control available with a longer sensor wire? The one supplies does not reach the warmest part of my roof.

il y a 2 ans
Traduire avec Google
3 Réponses
  • R : The RS-2 Controller is only supplied with 10 ft (3 m) of sensor wire. To route the sensor wire on your install, lay the Splice Connection and sensor wire along the bottom of the gutter within two inches of the roof de-icing cable. Route the sensor wire over at least one gutter support strap or nail in order to sense the full depth of the gutter, then route along one triangular weave of the heating cable on the roof as per diagram. At the peak of the second triangle, attach the sensor wire up the roof, at least 2 feet (60.96 cm) past the heater wire.
    il y a 2 ans
    Utile?
    Traduire avec Google

Q : How long is the power cable to plug into an outlet?

il y a 5 mois
Traduire avec Google
2 Réponses
  • R : The RS-2 has a 6-foot power cord.
    il y a 5 mois
    Utile?
    Traduire avec Google

Q : Can this be used to regulate snow and ice build up on a polyethylene tarp instead of a roof

il y a 2 ans
Traduire avec Google
2 Réponses
  • R : Yes, and no. This particular controller absolutely can do it, but the trigger for power is a combination of temperature and moisture within a preset (and unchangeable) range, good for its promoted purpose. That said, although very specific, if your project would want the same triggers, sure, this would work. Here's what the manual says: "If the [ambient] temperature is below 4C (40F) AND at least 10-inches (25.40-cm) of the sensor [wire] is laying in (or on) water, then the R2 will apply power... Note that snow or ice surrounding the sensor wire WILL NOT result in activation of the RS2 to energize the cables." Having said that, the companion heat trace wire itself would not be appropriate to be used on a poly tarp. The manufacturer lists many materials that are incompatible (e.g. a rubber roof), and despite the poly tarp having better flame resistance, it'd be risky. If you're looking for a slightly more basic temperature triggered switch, although it uses a probe, something like a Digital Seedling Heat Mat Thermostat Controller (I've got one that has a range of 40-108F) may be worth looking at.
    il y a 2 ans
    Utile?
    Traduire avec Google

Q : Could this be used on a mansard roof? (i.e. the gutter is 1 story below the edge of the roof where the cable zig zags

il y a 2 ans
Traduire avec Google
2 Réponses
  • R : The RS-2 will work on a mansard roof provided that its sensor wire will be placed on a heated section part of the roof (were at least 10 inches of the sensor wire should be able to sense melted ice/snow or water) and also they will be able to attached the sensor wire using its clips. Further, please check their roof material, for asphalt tab shingles use our ADKS or RC or PSR heating cables. If the roof is made of metal, flat, composite (tar and gravel), rubber, clay or wood, use only the PSR heating cable.
    il y a 2 ans
    Utile?
    Traduire avec Google

Q : Peut-on utiliser deux câbles sur un même contrôleur.

il y a 3 ans
1 Réponse
  • EasyHeat
    R : No, the RS2 is made to accept only one cable per unit, the maximum cable size that can be connected to the RS2 is 1200 Watts. Risk of fire, electric shock or the formation of ice dams can result from a larger cable or from multiple cables being connected.
    il y a 3 ans
    Utile?

Q : can this product be used inside aluminun eave trough

il y a 6 ans
Traduire avec Google
1 Réponse
  • R : Yes…The unit itself is mounted under the overhang and the sensor cable is then run in the eave trough. The sensor cable then detects both moisture and temperature to activate the roof cable when needed. One RS2 (052-2599) per roof cable.
    il y a 6 ans
    Utile?
    Traduire avec Google

Q : I just don't see the length of this cabe on this page. Am I blind?

il y a 7 ans
Traduire avec Google
1 Réponse
  • R : This product is a control to be used with the roof de-icing cables – it monitors the temperature and moisture on the roof with sensors and turns the cables on/off. The individual cable product numbers are: 052-2576,052-2577,052-2578,052-2579,052-2580,052-2581,052-2582,052-2583. The lengths of each are listed on the website for each.
    il y a 7 ans
    Utile?
    Traduire avec Google

Q : What is the power usage when plugged in but low temperature and moisture conditions are not present.

il y a 9 ans
Traduire avec Google
1 Réponse
  • R : The RS-2 requires two conditions present to energize the de-icing cable. Both cold temperature, on at 3C/38F, and off at 9C/48F and the presence of runoff water from the roof in contact with the sensor wire. If only one condition exists, the control will not activate the cable. Cables are designed to create a flow of water to avoid possible ice build up. The control when operating will draw a max of 10 amps.
    il y a 9 ans
    Utile?
    Traduire avec Google

Q : I have found in the past that the snow starts melting on my roof at 2-3 below zero and this is when the ice starts building If this only starts when moisture and 3 above are met , the damage would already be done,I.E. ice dams? Am I correct in my diagnosis

il y a 13 ans
Traduire avec Google
1 Réponse
  • R : The RS2 requires 2 conditions to be met before it energizes the heating cable. It requires a temperature that is 3°C or colder and the presence of water. As long as these conditions continue to be satisfied, the RS2 will continue to power the roof and gutter de-icing cable. The RS2 does not de-energize the roof cable unless one of the above mentioned conditions is no longer being met. i.e. the temperature has risen above 3°C or the temperature has dropped sufficiently below freezing causing the water supply to stop due to freezing. This should allow the water to flow along the cable until it gets to the ground so that it is no longer on the roof where it could cause ice dams.
    il y a 13 ans
    Utile?
    Traduire avec Google

4 étoiles et plus