NOTRE MAGASIN

Crédit Offert* EN SAVOIR PLUS

Soutien État de commande
EN
Rust Check

Produit antirouille Rust Check Rust Freeze, 250 g

#047-7900-6
Produit antirouille Rust Check Rust Freeze, 250 g
12,99 $

Malheureusement, cet article ne fait plus partie de l’assortiment du magasin que vous avez sélectionné et les magasins de la région.

Ces produits similaires présentés ci-dessous pourraient vous intéresser.

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

Rust Check
Rust Check

Produit antirouille Rust Check Rust Freeze, 250 g

12,99 $

Produit Détails

  • Produit antirouille Rust Check Rust Freeze avec une forte puissance figeante et pénétrante qui fige et déloge la rouille

  • Pénètre et déloge la rouille en profondeur pour desserrer les boulons et écrous grippés

  • Format : 250 g

Numéro de modèle de l’article 10030
Inflammable Oui
Non toxique Non
Fonctionnalités avancées Sans fonctionnalités avancées
Hauteur de l'article (po) 6,30 po
Poids de l'article (lb) 0,66 lb
Forme chimique Gel
Point d'éclair (°C) 18,00 °C
Type de produit chimique pour la peinture Nettoyant antirouille
Type de surface Métal

Notre politique de retour

Consulter l’intégralité de la politique de retour

Garantie

Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.

Comparer des articles semblables

Only Show Differences
Ratings
InflammableOuiOuiOuiOuiNon
Non toxiqueNonNonNonNonNon
Fonctionnalités avancéesSans fonctionnalités avancéesInodoreSans fonctionnalités avancéesSans fonctionnalités avancéesSans fonctionnalités avancées

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
3 commentaires avec 5 étoiles.
0 commentaires avec 4 étoiles.
0 commentaires avec 3 étoiles.
1 commentaires avec 2 étoiles.
1 commentaire avec 1 étoile.

Note générale

3.6
3 commentateurs sur 5 (60%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

    Filtrer les avis

    • prix
    • professionnalisme
    • achat
    1 to 5 sur 5 commentaire
    1 – 5 sur 5 commentaire

    Not as I was expecting

    il y a 4 ans
    I wouldn't buy it again I think it's just waste of money
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?

    Time saver

    il y a 9 ans
    After spending an hour trying to loosen a rusty bolt this did the trick in a couple of minutes. A few sprays and was on my way to continuing my project.
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?

    Mr

    il y a 11 ans
    I needed to get two bolts off and WD40 wasn't working. I sprayed this and within seconds the bolts came loose. Saved me lots of hassle.
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?

    Didn't help!

    il y a 12 ans
    This was to help remove stud nuts from an exhaust manifold on a 10 year old Toyota. The condition of the studs were similar to the picture on the can of "Freeze". I was looking for an alternative to heating with oxyacetylene since the space was tight, and there were a lot of sensitive wires and foam insulation around pipes. First I sprayed it on and left it for 5 mins, didn't help, then again sprayed and left it for 15 mins, and still didn't help. So then I tried spraying the stud for 15 to 20 sec. and leaving it penetrate for 30 mins, and still didn't help. In the end I fit a socket on a breaker bar and removed all the studs without the "Freeze". I wondered if it even worked, and using the removed studs I sprayed one for 15 sec. and yes the temp of the sprayed stud did go to below -15C, but that's only a change of say 30 to 40 degrees. Yet when using heat and bringing the metal to glowing orange is a temp change of over a 1000C, and this breaks the rust 100% of the time. I guess this is just another expensive gimmick.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?

    amazing

    il y a 14 ans
    a auto parts professional recommend this as a great penetrate oil. Used it on my break bleeder screws. Sprayed on and left on for 5 minutes and then the screw came off with no problem. I all ways look for the same professional for all my auto questions. I use this on all my rusted screws and bolts. Thanks rust check.
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?

    Questions

    1 - 2 sur 2 questions

    Q : Est-ce que ca peut servir pour enlever la rouille sur une pelle ou autres outils en metal ?

    il y a 6 ans
    1 Réponse
    • R : Non, nous suggérons: 47-5938-0 - sûr à utiliser; excellent sur la rouille légère 47-7964-4 - pour forte rouille; corrosif

      il y a 6 ans
      Utile?

    Q : CAN IT WORK ON THE INSIDE OF A MOTORCYCLE GAS TANK I have a 1980 honda motorcycle and the gas tank has a layer of rust in it I was wondering if this product will remove the rust in the gas tank?

    il y a 12 ans
    Traduire avec Google
    1 Réponse
    • R : Rust Check Freeze is a penetrating lubricant – it is not a rust remover. If the inside of the gas tank is rusting, then we would strongly recommend replacing the tank.

      il y a 12 ans
      Utile?
      Traduire avec Google
    Haut