NOTRE MAGASIN

Crédit Offert* EN SAVOIR PLUS

Soutien État de commande
EN

MotoMaster OE Plus

Filtre à huile MotoMaster OE Plus MOCH9018

#017-7726-4
Filtre à huile MotoMaster OE Plus MOCH9018
10,99 $
Mieux notésExclusivité
Achetez-le en ligne :
Ramassage à Leduc, AB
Ramassage entre le 6 janv. - 7 janv.
Besoin d’une livraison aujourd'hui :
Quantité mise à jour à 1
Nouveaux paiements numériques disponibles à la page de paiement
Trouvez-le également en magasin:
Ajouter au registre

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

Besoin d’aide pour l’installation?

Les services automobiles sont disponibles dans votre magasin

Produit Détails

Le filtre à huile MotoMaster OE+ MOCH9018 offre une protection avancée pour les moteurs modernes. Ce filtre à huile OE+ est conçu pour résister aux températures et aux pressions extrêmes grâce à ses composants améliorés, y compris un mélange synthétique qui emprisonne les particules de saleté fines. Vous pouvez utiliser le filtre avec de l'huile classique en un clin d'oeil ou prolonger votre intervalle d'entretien en utilisant l'huile synthétique. Il est compatible avec les deux. Pour les conducteurs qui recherchent une filtration de qualité supérieure, ce filtre MotoMaster peut offrir à votre véhicule une protection de performance prolongée.

  • Conçu pour être utilisé avec des huiles moteur classiques et synthétiques

  • Efficacité de filtration de plus de 99 %

  • Matières filtrantes fabriquées d’un mélange synthétique

  • Conçu afin de répondre ou de surpasser les spécifications de l'équipement d'origine

  • Protection éprouvée jusqu'à 24 000 km, lorsqu'utilisé avec une huile à moteur entièrement synthétique

  • Dimensions (L x la x H) : 62 x 62 x 90 mm (2,45 x 2,45 x 3,56 po)

  • Numéro de pièce : MOCH9018

Numéro de modèle de l’article MOCH9018
Cote de microns 99,00 µm
Diamètre extérieur du bas 6,20 cm
Diamètre extérieur du haut 6,20 cm
Diamètre intérieur du bas 5,01 cm
Fonctionnalités avancées Clapet antiretour, Soupape de décharge de dérivation
Hauteur de l'article (cm) 9,10 cm
Hauteur du paquet (cm) 6,99 cm
Hauteur du paquet (po) 2,75 po
Largeur du paquet (cm) 6,99 cm
Largeur du paquet (po) 2,75 po
Liste d’accessoires Aucun accessoire inclus
Matériau du filtre Fibre de verre synthétique
Numéro de pièce du fabricant MOCH9018
Poids du paquet (kg) 0,09 kg
Poids du paquet (lb) 0,19 lb
Profondeur du paquet (cm) 3,63 cm
Profondeur du paquet (po) 1,43 po
Type de filtre Synthétique
Type de joint d'étanchéité Joint torique

Notre politique de retour

Consulter l’intégralité de la politique de retour

Garantie

Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.

Points saillants de l'evaluation

List of Avantages Highlights
List of Désavantages Highlights

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
90 commentaires avec 5 étoiles.
37 commentaires avec 4 étoiles.
9 commentaires avec 3 étoiles.
7 commentaires avec 2 étoiles.
11 commentaires avec 1 étoile.

Note générale

4.2
96 commentateurs sur 108 (89%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

Images et vidéos du client

Filtrer les avis

  • prix
  • qualité
  • achat
  • en cas d'urgence
  • performance du moteur
  • valeur
  • pour les pneus
  • nettoyage
1 to 5 sur 154 commentaire
1 – 5 sur 154 commentaire

Great value Effective filter

il y a un mois
Great filter for consistent oil changes
Traduire avec Google
Utile?

Bon produit

il y a 2 mois
Je viens juste de l'installé sa semble bien
Utile?

Oil Filter

il y a 3 mois
Works good for my GMC Terrain
Traduire avec Google
Utile?

Great oil filters for the money

il y a 5 mois
These are really good filters. I find they are as good as other premium brands but for Less cost.
Traduire avec Google
Utile?

Canadian Tire works for me

il y a un an
I have used this filter with every oil change
Traduire avec Google
Utile?
1 – 5 sur 154 commentaire

Questions

1 - 10 sur 11 questions

Q : What company manufactures the OE oil filter.

il y a 6 ans
Traduire avec Google
4 Réponses
  • R : They are not made by FRAM, cut them apart and you'll see how much better the OE Plus is than the FRAM. These are made by Champion Laboratories in Albion, Illinois. This is also the parent company of Luber-Finer.

    il y a 3 ans
    Utile?
    Traduire avec Google

Q : Why does this filter seem smaller then the other brands its for a 2007 rav4 2.4l the fram filter i removed is bigger in size. I am installing your MOPH4967 it is smaller and the thread in housing seems to get tight only after turning a full turn ?

il y a 3 ans
Traduire avec Google
3 Réponses
  • R : Hi there, thank you for the question. The MotoMaster OE Plus Oil Filter Part # MOPH4967 is not the correct filter to install in a 2007 Toyota Rav7 2.4L. The following are the recommend filters: MotoMaster Oil Filter Part # MPH4386: Canadian Tire SKU # 017-1724 FRAM Extra Guard Oil Filter Part # PH4386: Canadian Tire SKU # 017-5513 FRAM Tough Guard Oil Filter Part # TG4386 (typically for high mileage drivers): Canadian Tire SKU # 117-2366

    il y a 3 ans
    Utile?
    Traduire avec Google

Q : Is there something wrong with the part finder? I bought the MOPH6607 as listed for my 2017 Nissan Rogue -- did not fit at all and wasn't even the same size as the old part. Had to reuse old filter for now.

il y a 3 ans
Traduire avec Google
1 Réponse
  • R : Hi there, thank you for your question. I recommend visiting the service department of your local Canadian Tire to have one of the technicians inspect the unit bought as the MotoMaster OE Plus Oil Filter Part #MOPH6607 is the correct oil filter for your vehicle. Other filter options for your vehicle include: FRAM Ultra Synthetic Oil Filter Part #XG6607: CTC Product #017-4503 Castrol SFX Premium Oil Filter Part #CAS6607: CTC Product #117-2711

    il y a 3 ans
    Utile?
    Traduire avec Google

Q : What has the 30 micron, 99% rating changed to when the kilometer rating coverage changed from 16,000km to 24,000km

il y a 4 ans
Traduire avec Google
1 Réponse
  • R : Hi there, The efficiency rating is based on removing particles greater than 30 microns. After extensive testing with our trusted vendor the kilometer rating coverage on this product was able to change from 16,000km to 24,000km.

    il y a 3 ans
    Utile?
    Traduire avec Google

Q : Advertized with a 24,000 KM rating? All the packaging on product says 16,000 KM life span.

il y a 5 ans
Traduire avec Google
1 Réponse
  • R : Hi there, we have increased our kilometer rating coverage from 16,000km to 24,000km after extensive testing with our trusted vendor. As we cycle through old packaging which state the 16,000km life span, the newly improved packaging will state the increased life span.

    il y a 5 ans
    Utile?
    Traduire avec Google

Q : How long is the change interval for part MOPH9688 (2013 Hyundai Veloster Base) oil filter?

il y a 5 ans
Traduire avec Google
1 Réponse
  • R : Hi Robert, our MotoMaster OE Plus oil filters are proven to protect your vehicle's engine for up to 24,000 km's when paired with a fully synthetic motor oil rated for the same protection. It's highly recommended that you consult your Owner's Manual for specific oil and filter requirements for your specific vehicle.

    il y a 5 ans
    Utile?
    Traduire avec Google

Q : I wonder why are oil throughput holes on the inside of Motomaster OE Plus filter are so small compared to those on filters of other brands (Fram, Quaker State, Mobile 1, etc)? I don't see how having smaller throughput openings can be good for oil flow.

il y a 5 ans
Traduire avec Google
1 Réponse
  • R : Hi Anton, the backplate differences are cosmetic only. The contact surfaces with the mounting base is exactly the same on both. Both plates have the same threads, thread pitch diameters, and more importantly, the same distance from the top of the gasket to the start of the first thread. Burst and pulse strength is also the same on both. Installation “feel” is the same. From a fluid flow point of view they are also identical. Pressure drop across both filter assemblies is the same. Or, in other words, oil flow rate is the same at a given differential pressure.

    il y a 5 ans
    Utile?
    Traduire avec Google

Q : How come oil throughput holes on the inside of these filters are so small? They almost looks like closed louvers. Are they supposed to be like this by design? I don't see how this can be good for oil throughput speed/capacity.

il y a 5 ans
Traduire avec Google
1 Réponse
  • R : Hi Anton, the backplate differences are cosmetic only. The contact surfaces with the mounting base is exactly the same on both. Both plates have the same threads, thread pitch diameters, and more importantly, the same distance from the top of the gasket to the start of the first thread. Burst and pulse strength is also the same on both. Installation “feel” is the same. From a fluid flow point of view they are also identical. Pressure drop across both filter assemblies is the same. Or, in other words, oil flow rate is the same at a given differential pressure.

    il y a 5 ans
    Utile?
    Traduire avec Google

Q :  I have a 2006 Honda element this oil filter seems to be much smaller than the regular Honda filter or the Canadian tire red cannister filter Im just a little concern about that what do you think  Is there another OEM spec black filter # for my H element

il y a 5 ans
Traduire avec Google
1 Réponse
  • R : Based on the vehicle specifications you've provided, the corresponding MotoMaster OE Plus oil filter which is compatible with your Honda Element 2.4L is CTC SKU 017-7777 or part number MOPH7317.

    il y a 5 ans
    Utile?
    Traduire avec Google

Q :  The OEM plus filter I bought for my Honda element from Canadian tire seems to be a little smaller than my regular Honda filter would that make a difference  with anything having to do with the oil flow in my car 

il y a 6 ans
Traduire avec Google
1 Réponse
  • R : Hi there, the backplate differences are cosmetic only. The contact surfaces with the mounting base is exactly the same on both. Both plates have the same threads, thread pitch diameters, and more importantly, the same distance from the top of the gasket to the start of the first thread. Burst and pulse strength is also the same on both. Installation “feel” is the same. From a fluid flow point of view they are also identical. Pressure drop across both filter assemblies is the same. Or, in other words, oil flow rate is the same at a given differential pressure.

    il y a 5 ans
    Utile?
    Traduire avec Google
1 - 10 sur 11 questions
Haut