Obtenez votre commande dès aujourd’hui. Ramassage* ou livraison le jour même** disponible.

En savoir plus

ÉCONOMISEZ JUSQU’À 60 % LORS DU VENDREDI FOU.

MAGASINEZ

Flo N' Go

Système d'extraction d'huile Flo N' Go

#028-3054-0
Système d'extraction d'huile Flo N' Go
36,19 $
Mieux notés

Malheureusement, cet article ne fait plus partie de l’assortiment du magasin que vous avez sélectionné et les magasins de la région.

Ces produits similaires présentés ci-dessous pourraient vous intéresser.

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

Flo N' Go

Flo N' Go

Système d'extraction d'huile Flo N' Go

36,19 $

Produit Détails

La trousse d'extraction d'huile Flo N' Go est idéale pour tondeuses, bateaux et réservoirs de liquide de lave-glace. Elle convient aussi aux petits moteurs. Elle se branche à tout aspirateur de déchets secs-humides et peut extraire jusqu'à 1 litre d'huile par minute.

  • Système d'extraction d'huile Flo N' Go idéal pour tondeuses à gazon, bateaux ou liquide de lave-glace

  • Pour les petits moteurs

  • Se branche à tout aspirateur de déchets secs-humides

  • Draine jusqu'à 1 L d'huile par minute

  • Comprend : récipient pour l'huile avec couvercle, tuyau et raccord d'aspirateur

  • No de pièce du fabricant : 09644

Notre politique de retour

Consulter l’intégralité de la politique de retour

Garantie

Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.

Comparer des articles semblables

Only Show Differences
Ratings
Type de contenant de rangementContenantsContenantsContenantsSacs
CouleurNoirNoirNoirBlanc
Capacité de l'article (L)9,50 L8,00 L15,00 L10,00 L

Points saillants de l'evaluation

List of Avantages Highlights
List of Désavantages Highlights
Impossible de générer un Désavantages approprié pour le moment.

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
11 commentaires avec 5 étoiles.
4 commentaires avec 4 étoiles.
2 commentaires avec 3 étoiles.
0 commentaires avec 2 étoiles.
2 commentaires avec 1 étoile.

Note générale

4.2
16 commentateurs sur 18 (89%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

    Filtrer les avis

    • achat
    • petit
    • nettoyage
    • emballage
    • largeur
    • accessibilité
    • enlèvement
    • parking
    1 to 5 sur 19 commentaire
    1 – 5 sur 19 commentaire

    Didn’t work

    il y a 7 ans
    Bought this to extract oil via Dip stick tube on 2007 Smart Car Supplied tubing was too wide a Guage for dipstick channel Went to Autoparts store for smaller guage tube to fit to this opening onboard canister Used industrial Shop Vac for suction and only was able to draw 100-200ml in 30min vs the 1Litre per minute as advertised
    Traduire avec Google
    Utile?
    Réponse de ScepterCustomerService :
    il y a 7 ans
    ScepterCustomerService
    We regret that you are not satisfied with your purchase and would like to hear from you. Please contact our Customer Service Department toll free at 1-800-387-6018, our hours are M - F from 8 - 5 EST. We look forward to assisting you.

    It's ok but

    il y a 7 ans
    I bought it to extract oil from my 2010 GM Terrain 2.4 l. The hose did not fit inside the dipstick tube so it would not work on my car. I did use it on my other toys though
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?

    Simple to use

    il y a 8 ans
    I recently used this extraction unit to flush the oil from my quad after water had gotten in. The instructions say to run the machine to get the oil warm. I did not do this. and the unit still worked but the oil did flow much slower. I did a second flush with clean oil and it did flow much faster with warm oil.
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?

    Great design, easy to use!

    il y a 8 ans
    I've been looking for an easier way to change the oil in my lawn mower and I'm glad I finally have this kit! Before, I would have to make sure all the gasoline was used up, then I would have to tilt my lawn mower to it's side and make sure that I was strong enough to lift it up so that the oil goes into a funnel. Now, all I have to do is drop in the hose, turn on my shop vac, and all the oil goes into the container. Simple and no mess!
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?

    Made a dirty job easy

    il y a 8 ans
    For most small engines, changing the oil involves either lifting the product while trying to remove a drain plug or an oily mess. With this product, that dirty task has been simplified by merely inserting the tube done the filler pipe and starting your vacuum. I wish I would of had this product years ago.
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?
    1 – 5 sur 19 commentaire

    Questions

    1 - 9 sur 9 questions

    Q : Fumes through vacuum Will it be sucking flammable fumes from gas tanks etc. through the vacuum where there are exposed motor brushes that are sparking while the engine is running?

    il y a 12 ans
    Traduire avec Google
    5 Réponses
    • R : Do fumes explode? Please us only a explosion proof pump!

      il y a 11 ans
      Utile?
      Traduire avec Google

    Q : can it be used to do car oil change?

    il y a 12 ans
    Traduire avec Google
    3 Réponses
    • R : Yes! Make sure oil is not hot!

      il y a 11 ans
      Utile?
      Traduire avec Google

    Q : can this unit drain oil from the dip stick opening instead of removing the oil plug from the engine on a lawn tractor

    il y a 10 ans
    Traduire avec Google
    2 Réponses
    • R : Absolutely, as long as the plastic tube can get to the bottom of the crankcase or oil pan.

      il y a 10 ans
      Utile?
      Traduire avec Google

    Q : Can I use it to remove old GAS?

    il y a 12 ans
    Traduire avec Google
    2 Réponses
    • R : not a good idea, the gas fume and electric vacuum don't go well, you know what's gonna happen..look for manual fluid extractor or pnuematic

      il y a 10 ans
      Utile?
      Traduire avec Google

    Q : what is the minimum power of the vacum machine must be used?

    il y a 12 ans
    Traduire avec Google
    2 Réponses
    • R : A normal household vacuum cleaner in good working order or a Shop Vac of any size will do.

      il y a 10 ans
      Utile?
      Traduire avec Google

    Q : Will this work on a V6 I/O engine. To suck oil out through the dip stick tube ? 

    il y a 6 ans
    Traduire avec Google
    1 Réponse
    • R : The Flo N’ Go Oil Extraction System (0283054) was designed for passenger vehicles. Although this product may work on an I/O (Inboard/Outboard) marine engine, it is not recommended to be used for purposes other than what it was designed for.

      il y a 6 ans
      Utile?
      Traduire avec Google

    Q : Can the Fluid Extraction Flo n' Go be used to drain about 7.5 liters 2US gallons of furnace oil from a furnace oil tank.

    il y a 6 ans
    Traduire avec Google
    1 Réponse
    • R : The Flo n Go extraction kit is designed to be used on small engines, (example: lawnmowers). Our apology but we do not recommend it be used for any other purpose other than small engines.

      il y a 6 ans
      Utile?
      Traduire avec Google

    Q : what is the capacity of the tank?

    il y a 9 ans
    Traduire avec Google
    1 Réponse
    • R : The tank capacity is 8L.

      il y a 9 ans
      Utile?
      Traduire avec Google

    Q : Can I use this on a 2.0L 4 cylinder engine?

    il y a 9 ans
    Traduire avec Google
    1 Réponse
    • R : Yes, the Fluid Extraction System should be a suitable system for drawing the used oil out of the vehicle assuming the 54” hose will reach the oil reservoir. Please follow all instructions and only use for extracting used oil.

      il y a 9 ans
      Utile?
      Traduire avec Google
    Haut