Minwax
Bouche-pores facile à teinter Minwax, 177 mL
#048-0924-0
19,99 $
Achetez-le en ligne :
- GratuitOffert
- Offert
- Indisponible
Ramassage à Leduc, AB
Obtenez-le dès aujourd’hui!5 En stock
Ramassage disponible à 16 h 00, 05 déc.
Quantité mise à jour à 1
Trouvez-le également en magasin:Allée 47
Il n’en reste que 5
au Leduc, AB
Ajouter au registre
À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.
Objets similaires
Produit Détails
Le bouche-pores MinwaxMD est une formule au latex à teinter et à peindre spécialement conçue pour être compatible avec toutes les teintures pénétrantes de MinwaxMD, y compris le fini bois MinwaxMD, la teinture gel MinwaxMD et la teinture à base d'eau MinwaxMD.
Bouche-pores facile à teinter MinwaxMD idéal pour réparer le craquelage, les creux, les trous causés par les clous, les trous de nœuds et les autres défauts dans les surfaces en bois brut à l’intérieur ou l’extérieur
Bouche-pores à base de latex qui se ponce facilement et sèche rapidement
Spécialement formulé pour accepter la teinture à bois MinwaxMD
Facile à nettoyer avec de l'eau et du savon
Format : 177 mL
| Numéro de modèle de l’article | 528520000 |
|---|---|
| Couleur | Assortiment |
| Hauteur du paquet (cm) | 7,00 cm |
| Hauteur du paquet (po) | 2,76 po |
| Largeur du paquet (cm) | 4,00 cm |
| Largeur du paquet (po) | 1,57 po |
| Matériau(x) | Poly et plastique |
| Nombre de pièces | 1 |
| Poids du paquet (kg) | 0,60 kg |
| Poids du paquet (lb) | 1,32 lb |
| Profondeur du paquet (cm) | 10,00 cm |
|---|---|
| Profondeur du paquet (po) | 3,94 po |
| Utilisations du produit | Maison, Intérieur |
Garantie
- Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.
Commande en ligne
- Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
- Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
- La livraison le jour même coûte 9,99 $ par commande.
- Informations sur une commande en ligne
Retours
- La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
- Certains articles ne sont pas remboursables ni échangeables.
- La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.
Comparer des articles semblables
Only Show Differences | |||||
| Ratings |
Acheter des produits connexes
- Offres hebdomadaires
- Les clients ont aussi consulté
- Vers les produits tendances
- Plus de cette marque
Offres hebdo
Souvent achetés ensemble
Vous magasinez
$92.96
Points saillants de l'evaluation
List of Avantages Highlights
Avantages
Impossible de générer un Avantages approprié pour le moment.
List of Désavantages Highlights
Désavantages
Évaluations
Images et vidéos du client
Filtrer les avis
- bois
- ponçage
- instructions
- achat
- petit
- couleur
- décevant
- prix
Cote
Paramètre régional
1 to 5 sur 166 commentaire
1 – 5 sur 166 commentaire
Les plus récents
1 étoile(s) sur 5.
Don't buy this product in a tube!
il y a un mois
Do not buy this in a tube. It is almost impossible to get the stuff to come out! Perhaps this was on the shelf in the store for too long.
Traduire avec GoogleUtile?
Réponse de MINWAX :
il y a un mois
MINWAX
We apologize you had an issue when using our product. If you would like to discuss your review further or have any questions, please contact us directly at 1-800-523-9299 or info@cbgbrandreview.com. Sincerely, L.T., Customer Support Specialist
2 étoile(s) sur 5.
Cannot be preserved
il y a un an
I used it on wood. It pretty much filled up the holes like it said it would. The only problem is after you're done using it for the first time. If there's any left in the tube it pretty much goes to waste. I followed the instructions to save what was left over and within 3 days it pretty much dried up in the tube. It was all hard. I couldn't put it in anything. It wouldn't come out of the tube correctly. If you use it entirely then it's a great product to have. I'm giving it two stars because of the fact that it dried out that fast
Traduire avec GoogleUtile?
Réponse de MINWAX :
il y a un an
MINWAX
Thank you for taking the time to review the Stainable Wood Filler. We apologize the filler dried out and you were unable to use it for other projects. If you would like to discuss your review further, please contact us directly at 1-800-523-9299 or info@cbgbrandreview.com. Sincerely, L.T., Digital Care Team
1 étoile(s) sur 5.
VERY POOR stainability
il y a un an
I thought Minwax guaranteeing satisfaction meant the product would meet the description. Wrong.
Every spot I used this stainable wood filler stands out like a sore thumb.
I was using Red Mahogany stain and on the wood filler spots it looks like I was using Golden Oak. It's about 10 shaded lighter on the wood filler.
Resoundingly disappointed in the product. I won't be using it again.
Traduire avec GoogleNon, Je ne recommande pas ce produit.
Affiché initialement sur minwax.com
Réponse de minwax.com :
il y a un an
Customer Support
Thank you for taking the time to review the Minwax Stainable Wood Filler. We are concerned that your experience with our product was disappointing and we appreciate your time and feedback. So we can get more information on your application, please contact us directly at 1-800-523-9299 or info@cbgbrandreview.com. Sincerely, R.C., Digital Care Team
1 étoile(s) sur 5.
Gritty Marshmallow Fluff
il y a un an
My container of Carpenters Wood Filler was used up and this was the replacement Winwax product. It's not even close! This stuff is complete junk, almost like gritty marshmallow fluff. It's not at all like the Carpenters, which was a solid, thick paste.
Traduire avec GoogleAffiché initialement sur minwax.com
Réponse de minwax.com :
il y a un an
Customer Support
Thank you for taking the time to review the Minwax Wood Filler. We are concerned that your experience with our product was disappointing and we appreciate your time and feedback. Our product will dry very hard. So we can get more information, please contact us directly at 1-800-523-9299 or info@cbgbrandreview.com. Sincerely, R.C., Digital Care Team
2 étoile(s) sur 5.
Stainable wood filler
il y a un an
Went on easy, but did not absorb stain after it dried. Stayed same colour when applied.
Traduire avec GoogleUtile?
Réponse de MINWAX :
il y a un an
MINWAX
Thank you for taking the time to review the Stainable Wood Filler. Minwax Stainable Wood Filler accepts stain, though sometimes at a different rate from the surrounding wood. This is often due to the natural porosity, age, or moisture content of the wood. Please try these suggestions, based on lab tests for the Minwax Stainable Wood Filler, to get a closer match to the surrounding stained wood:
1.) Lightly sand filler before applying stain (no finer than 100 grit.) Over-sanding or using a finer grit tends to close pores.
2.) Stain as soon a possible after filler hardens, following label instructions for the stain. The longer the filler cures, the harder and less porous it will be, and therefore the less stain it will absorb.
3.) If the first coat of stain is not as dark as desired, in a sample area use a piece of 100-grit sandpaper and dampen the sandpaper with the stain you are using. Use this paper to wet sand the Stainable Wood Filler. I would recommend rubbing out the area with light pressure in the same direction as the wood grain. Increase your rubbing/sanding pressure as needed. You should notice that the combination of the stain and sandpaper is blending the Wood Filler compound with the surrounding stained wood. Here again, practice your technique in a test area or inconspicuous spot.
4.) If the spots are so small that the wet sanding technique is not practical (finish nail holes), you may have to use a topical stain, such as Minwax Gel Stain, in a matching color, and using an artist's brush, paint the stain lightly on the spots. Rather than wiping, allow the stain to dry on the surface, which may take up to 48 hours. If desired, to achieve more of a wood grain effect, 5 minutes after applying the stain, use a dry brush to drag through the stain in the direction of the wood grain, then let dry.
These techniques will help blend the filler with the surrounding stained wood. If they are not successful, the only remaining option is to remove the filler completely and sand the entire surface for restaining. After re-staining and sealing the wood with the clear coat of your choice, apply Minwax Wood Putty in a matching color.
If you have further questions or concerns, please contact us directly at 1-800-523-9299 or info@cbgbrandreview.com. Sincerely, L.T., Digital Care Team
1.) Lightly sand filler before applying stain (no finer than 100 grit.) Over-sanding or using a finer grit tends to close pores.
2.) Stain as soon a possible after filler hardens, following label instructions for the stain. The longer the filler cures, the harder and less porous it will be, and therefore the less stain it will absorb.
3.) If the first coat of stain is not as dark as desired, in a sample area use a piece of 100-grit sandpaper and dampen the sandpaper with the stain you are using. Use this paper to wet sand the Stainable Wood Filler. I would recommend rubbing out the area with light pressure in the same direction as the wood grain. Increase your rubbing/sanding pressure as needed. You should notice that the combination of the stain and sandpaper is blending the Wood Filler compound with the surrounding stained wood. Here again, practice your technique in a test area or inconspicuous spot.
4.) If the spots are so small that the wet sanding technique is not practical (finish nail holes), you may have to use a topical stain, such as Minwax Gel Stain, in a matching color, and using an artist's brush, paint the stain lightly on the spots. Rather than wiping, allow the stain to dry on the surface, which may take up to 48 hours. If desired, to achieve more of a wood grain effect, 5 minutes after applying the stain, use a dry brush to drag through the stain in the direction of the wood grain, then let dry.
These techniques will help blend the filler with the surrounding stained wood. If they are not successful, the only remaining option is to remove the filler completely and sand the entire surface for restaining. After re-staining and sealing the wood with the clear coat of your choice, apply Minwax Wood Putty in a matching color.
If you have further questions or concerns, please contact us directly at 1-800-523-9299 or info@cbgbrandreview.com. Sincerely, L.T., Digital Care Team
1 – 5 sur 166 commentaire
Aucune question n'a été posée sur ce produit.
