Scie circulaire 13 A Black + Decker BDECS300C, avec guide laser et lame tout usage, 7 1⁄4 po

OK saw ,for price and rpm for its size,the supplied guide square sould be 1.1mm wider as there is a 1.1mm play or space on the base plate were it goes in to be mounted the 45 degree angle and blade height lock lever could be better untensions wen cutting second cut,has to be checked prior each cut

The Black & Decker 13 Amp 7-1/4" Circular Saw requires some minor modifications to get accurate cuts. First and foremost, the included 18T General Purpose Wood Cutting blade is very dull and will flex with use. I used the stock blade to breakdown partially rotted dimensional lumber – pictured - for firewood, then later disposed of it in the municipal metal scrap bin. Most aftermarket blades will cut far better than the included blade, and I sometimes use steel alloy blades that will even cut better than the stock blade. The other modification this saw will likely require is to remove material from the bevel stop. I used a rotary tool and an abrasive bit to grind the down stop – pictured - and allow for a true 90 degree cut. This modification could instead be done with a flat file, or even sandpaper glued to a piece of plywood. To achieve accurate cuts, I also use a square to set the bevel – pictured - and ignore the markings on the bevel gauge. The sole of this circular saw is stamped steel so it will flex somewhat, but the bevel stops and blade depth should be set on any saw, regardless of the design. I purchased my Black & Decker 13 Amp 7-1/4" Circular Saw during a “Red Hot Buy” from ACE Hardware, so I paid a super low price for a very capable saw. But, overall I would not recommend this saw to a friend because of the necessary modifications for an accurate cut.

Expected level of quality for the price point

Saw worked exactly as expectied Smooth cut Vibration free

Laser doesn't work, fresh out of the box