MAXIMUM
Scie à onglets coulissante à 2 biseaux MAXIMUM, 10 po
#055-6767-0
679,99 $
Mieux notésExclusivité
Malheureusement, cet article ne fait plus partie de l’assortiment du magasin que vous avez sélectionné et les magasins de la région.
Ces produits similaires présentés ci-dessous pourraient vous intéresser.Objets similaires
À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.
Produit Détails
Scie à onglets coulissante à 2 biseaux MAXIMUM avec moteur de 15 A et 3 200 tr/min
Crans d'arrêt à 0, 15, 22,5, 31,6 et 45 degrés, à droite et à gauche
Double biseau avec verrou de biseau à l'avant
Modèle compact et coulissant novateur
Départs en douceur et vitesse constante
Rallonges latérales télescopiques solides pour soutenir les longues pièces à travailler
Diamètre de la lame : 25 cm (10 po)
Dents de la lame : 60
Garantie
- Garantie limitée de 5 ans contre défauts de matériaux et fabrication.. Pour service clientèle, téléphoner au 1 888 670-6682. 1 an, réparation
Renseignements supplémentaires
- Consulter les guides de l’utilisateur et d'autres renseignements sur les articles
Commande en ligne
- Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
- Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
- La livraison le jour même coûte 9,99 $ par commande.
- Informations sur une commande en ligne
Retours
- La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
- Certains articles ne sont pas remboursables ni échangeables.
- La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.
Comparer des articles semblables
Only Show Differences | Consultation en cours | |||||
| Ratings | ||||||
| Hauteur du paquet (cm) | 46,00 cm | |||||
| Hauteur du paquet (po) | 18,11 po | |||||
| Largeur du paquet (cm) | 51,00 cm |
Acheter des produits connexes
- Offres hebdomadaires
- Les clients ont aussi consulté
- Vers les produits tendances
- Plus de cette marque
Points saillants de l'evaluation
List of Avantages Highlights
Avantages
List of Désavantages Highlights
Désavantages
Impossible de générer un Désavantages approprié pour le moment.
Évaluations
Filtrer les avis
- sciage
- achat
- coupe
- qualité
- prix
- les caractéristiques du produit
- précision
- petit
Cote
Paramètre régional
1 to 5 sur 18 commentaire
1 – 5 sur 18 commentaire
Les plus récents
1 étoile(s) sur 5.
Questionable quality!
il y a 6 ans
My saw was literally only an hour old when the motor ground to a halt and I could hear parts inside the motor rattling around. Reading through these reviews I see that another saw has suffered the same catastrophic failure as mine. It leads me to question the overall quality of this item. Look elsewhere for another saw.
Traduire avec GoogleNon, Je ne recommande pas ce produit.
Utile?
2 étoile(s) sur 5.
OK the first two years but after that...downhill
il y a 7 ans
Bought this saw to build my basement. It has a lot of power, soft start, laser is good (you can't see it outdoor, only indoor) It is generally well made for rough construction like framing. However for finishing it is not precise, you will need to adjust it to get a perfect 90degree.
My biggest problem is with the miter quick lock positions. The part that clicks into the grooves is made of plastic. After two year of use the plastic now flexes so when you click it into the 90 degree position is does not stay there, it moves left or right 1/4 inch. This means you have no idea where the actual 90 degree cut is.
So if your doing finishing cuts or any woodwork, this is useless. I do not recommend this product. Save you money and buy something made of all metal components.
Traduire avec GoogleNon, Je ne recommande pas ce produit.
Utile?
5 étoile(s) sur 5.
Great saw
il y a 8 ans
It seems that i need to buy a poor saw before i step up and get a good one. My previous saw was okay for odd jobs but did not really do anything great. I was fortunate to pick this saw on sale and have not regretted this purchase one bit. I do not have a lot of room for permanent stands for my power tools. I have a large shop shelf in my workshop and I can pop it up onto the shelf in no time. I can grab it off the shelf and mount it onto my workmate in a minute. I have used it for renovations, finishing , trim, shelves, cupboards and small projects.
Traduire avec GoogleOui, Je recommande ce produit.
Utile?
5 étoile(s) sur 5.
Good value for DIY
il y a 8 ans
Have had this saw for just under a year now. Completed a number of projects with it. Was originally after the Bosch but this saw had excellent features and I managed to pick it up on sale so it was an amazing bargain compared to the Bosch. I have a habit of going over all bolts, nuts etc. when I purchase any tool so I didn't have any assembly issues noted by others. Soft start does take getting used to but I actually like it now. It gives me a second to think before cutting sometimes saving me from making a stupid cut. compact and enough power for all the hard wood I use. Haven't noticed any accuracy problems and I just finished a project with over 400 mitre cuts. Happy I made this purchase.
Traduire avec GoogleOui, Je recommande ce produit.
Utile?
4 étoile(s) sur 5.
A good product with distinct features
il y a 8 ans
I'm not a fan of the Maximum line and this is one that really stands out. I have been using it for 5 months now. I bought it mainly because of the shorter space required behind the machine, soft start and solid railing system. These features haven't disappoint me.
Here are a few Cons for this machine:
- the back plate like an omega shape has left and right side and they do not form a straight line. Impossible to make perfect 90 degrees cut with it and no way to fix it
- the default setting is not perpendicular and must fine tune by yourself
- the dust collection port only collects a small part of the dust even with a 3HP vacuum
- the arbor is not deep enough for dado insert
This is still a solid piece of equipment after all and if you are tight of space, this machine is worth considering
Traduire avec GoogleOui, Je recommande ce produit.
Utile?
1 – 5 sur 18 commentaire
Questions
Commencez à taper votre question et nous vérifierons si elle a déjà été posée et répondue.
1 - 10 sur 17 questions
Réponses les plus utiles
Q : How much does the saw weigh?
il y a 10 ans3 Réponses
- Traduire avec Google
R : 44lbs 4 oz is the weight
il y a 9 ansUtile?
Q : Is any portion of the supporting structure made out of plastic (like the black parts at the back)?
il y a 9 ans2 Réponses
- Traduire avec Google
R : Worse, the little part that locks into the miter plate hard stops is made of plastic, and starts mushrooming right away. Even with the locking lever engaged the table slides 2-3 degrees each way. There are a lot of plastic parts that really take away from how much potential this design showed with the backwards rails. Very cheaply assembled with lousy out of the box adjustments.
il y a 8 ansUtile?
Q : Does this saw have a laser?
il y a 10 ans2 Réponses
- Traduire avec Google
R : Yes, it does have a laser
il y a 10 ansUtile?
Q : The RPM on this saw is 3200 while ths RPM for most others is 5000. Is this the motor or blade speed?
il y a 10 ans2 Réponses
- Traduire avec Google
R : I think its the blade speed. The motor is supposed to be soft start/Constant speed, meaning its not supposed to get bogged down on deep cuts. Regular saws spin the blade faster so it has the momentum to make it through the cut. The saw doesn't jump when you start it like some other saws do. Either way the blade does spin slower but I also don't notice it Bogging down on deep cuts which I will say makes it a bit easier to control (my old saw would "Buck" some times while this one just powers through it albeit slower).
il y a 10 ansUtile?
Q : dual bevel compound mitre saw -model # 055-6876-0 . One of the twin laser guides have ceased to work. I think I have cleaned the lens but still no light. Have contacted mecanair and they don't have the part. Anyone have success getting them workin
il y a 5 ans1 Réponse
- Traduire avec Google
R : Besides cleaning, you can check the connection to the controller assembly inside the handle
il y a 4 ansUtile?
Q : how to get parts Power switch not working anymore
il y a 6 ans1 Réponse
- Traduire avec Google
R : Please contact MAXIMUM directly at 1 888 670 6682 to inquiry about the availability of parts.
il y a 6 ansUtile?
Q : I can only get the saw to bevel left , what is the secret to the right bevel ?? does it have something to do with the Bevel Dent pin ??
il y a 6 ans1 Réponse
- Traduire avec Google
R : I am sorry for your frustration. Please contact our customer service to have the manual mailed or emailed to you by calling 1-800-387-8803 or you can reach us by email as well, customerservice@canadiantire.ca
il y a 6 ansUtile?
Q : Does the maxim 10 inch dual bevel call pound mitre saw I have a power reset button
il y a 6 ans1 Réponse
- Traduire avec Google
R : No, the Miter Saw does not have a power reset button.
il y a 4 ansUtile?
Q : What is the width of the 10" Maximum vs the 12" Maximum? Is it 19-20" like the mastercraft saw?
il y a 6 ans1 Réponse
- Traduire avec Google
R : The width of the 10" is 20 inches and the width of the 12" Mitre saw is 28 inches.
il y a 6 ansUtile?
Q : I have the older version of this saw and the sawdust bag has torn and it not usable, where can i get a replacement bag?
il y a 7 ans1 Réponse
- Traduire avec Google
R : Please contact MAXIMUM at 1-888-670-6682 for replacement parts. Please ensure to have your product number off of the mitre saw when calling.
il y a 7 ansUtile?
1 - 10 sur 17 questions
