NOTRE MAGASIN

Crédit Offert* EN SAVOIR PLUS

Soutien État de commande
EN
3M

Nécessaire de réparation de pare-brise 3M

#038-0024-6
Nécessaire de réparation de pare-brise 3M
16,99 $

Malheureusement, cet article ne fait plus partie de l’assortiment du magasin que vous avez sélectionné et les magasins de la région.

Ces produits similaires présentés ci-dessous pourraient vous intéresser.

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

3M
3M

Nécessaire de réparation de pare-brise 3M

16,99 $

Produit Détails

  • Nécessaire de réparation de pare-brise 3M minimisant l'apparence des petits éclats, des fissures et des marques étoilées à moins de 1 po de diamètre

  • Système à un élément pour remettre le pare-brise à neuf

  • Rien à mélanger ni à chauffer

  • Instructions détaillées pour une utilisation sécuritaire et simple

  • Ne permet pas forcément de retrouver la clarté d'origine du pare-brise

Notre politique de retour

Consulter l’intégralité de la politique de retour

Garantie

Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
1 commentaires avec 5 étoiles.
0 commentaires avec 4 étoiles.
0 commentaires avec 3 étoiles.
0 commentaires avec 2 étoiles.
6 commentaires avec 1 étoile.

Note générale

1.6
1 commentateurs sur 7 (14%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

    Filtrer les avis

    • conception
    • en cas d'urgence
    • résultats
    • décevant
    • achat
    • réparations
    • temps d'attente
    • petit
    1 to 5 sur 7 commentaire
    1 – 5 sur 7 commentaire

    ça vaux 15$

    il y a 9 ans
    la résine colle pas trop trop! il disent dle laisser 20min Au soleil.. jlai laisser aumoin 2-3h pis cetais même pas sèche! faut qui fasse température parfaite pour l'application. Ordinaire!!

    Non, Je ne recommande pas ce produit.

    Utile?

    Doesn't Work

    il y a 10 ans
    Repairing your own windshield seems like a far fetched idea but since this product was made by 3M, I thought it a possibility. I should have read the reviews before buying it. The mechanism seemed to work well enough but the resin did not fill the cracks and there is no way this product is reusable. The resin bonded the plunger and base together. I couldn't even add more resin to try to fill the cracks better. One and done. I also tried using the resin to fill a bit and it never cured. It was 29C and the car was in full sun for two hours and the plastic cover just came right off and there was no resin in the pit. The only thing the resin seemed to bond was the door making it useless to use again. I am disappointed that 3M sells this product and that I have to give it such a bad review but it is what it is.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?

    A Complete Fail

    il y a 10 ans
    Followed the instructions, but no amount of pressure would push resin into crack. Actually added another crack headed off in a different direction. I suspect that the plastic plunger is malformed, not enough pressure applied to to the resin.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?

    This product does not work

    il y a 10 ans
    The design is very poor and this product did not work for me. The tools provided were made of cheap plastic, and already bent and crooked, so they did not fit well. The dropper was not airtight on the top, the alcohol swab was dry and the plastic film had been folded, so it was impossible to use.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?

    Not impressed.

    il y a 10 ans
    Tried to fix a very small chip. The design is awkward to use, and can leak very easily. Even after it is all set up and you apply the pressure it is difficult to fill cracks. They say it is reusable, but you cannot reinsert the screw in tool after the resin has been used and has filled the threads. It seems like the design was created to work around another design. Don't waste your money or time. You will be very luck if it works for you.
    Traduire avec Google

    Non, Je ne recommande pas ce produit.

    Utile?
    1 – 5 sur 7 commentaire

    Questions

    1 - 2 sur 2 questions

    Q : is this product good for glass windows too?

    il y a 10 ans
    Traduire avec Google
    2 Réponses
    • R : If you are thinking of sticking a flat object, not too heavy, to flat glass, my experience indicates that it would work well. If you are thinking of using the tape to fasten a pane of glass into a frame, glazier’s putty would work much better because it can be formed more readily into the required fillet.

      il y a 10 ans
      Utile?
      Traduire avec Google

    Q : Can this be used to remove fine scratches of windshield ?

    il y a 11 ans
    Traduire avec Google
    2 Réponses
    • R : No

      il y a 10 ans
      Utile?
      Traduire avec Google
    Haut