Obtenez votre commande dès aujourd’hui. Ramassage* ou livraison le jour même** disponible.

En savoir plus
NOTRE MAGASIN

Crédit Offert* EN SAVOIR PLUS

Soutien État de commande
EN

Detail K2

Déchiqueteuse/broyeuse sans fil à démarrage électrique à essence Detail K2 OPC505AE, 5 po, 14 HP

#374-4486-0
Déchiqueteuse/broyeuse sans fil à démarrage électrique à essence Detail K2 OPC505AE, 5 po, 14 HP
5 999,99 $
Mieux notés
Achetez-le en ligne :
Ramassage à Leduc, AB
Ramassage entre le 27 déc. - 31 déc.
Quantité mise à jour à 1
Nouveaux paiements numériques disponibles à la page de paiement
Trouvez-le également en magasin:
Ajouter au registre

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

Detail K2

Detail K2

Déchiqueteuse/broyeuse sans fil à démarrage électrique à essence Detail K2 OPC505AE, 5 po, 14 HP

5 999,99 $

Produit Détails

La déchiqueteuse OPC505AE est une déchiqueteuse à disque haute vitesse de 5 po tout-terrain approuvée par le DOT alimentée par un moteur KOHLER MD Command PRO MD CH440 de 14 HP et 429 cm 3 avec démarrage électrique et système d'alimentation automatique, avec des vitesses de rouleau hydraulique allant jusqu'à 600 tr/min pour un couple maximal de 176,5 pi/lb (240Nm) et jusqu'à 2 900 lb/po 2 (20 MPa) de force maximale. Dotée d'un entraînement de 3 600 tr/min et d'une chambre d'alimentation à réglage automatique pour déchiqueter les arbres d'un diamètre allant jusqu'à 5,25 po, de dents internes à rotation libre pour dégager les copeaux et le bois de l'intérieur du tambour, d'une très grande goulotte d'alimentation, d'une chute d'expulsion à hauteur de remorquage réglable avec tuyau de chute réglable sans outil pivotant sur 180° et d'une hauteur de 61 po, idéale pour le chargement dans les caisses de camionnette.

  • Déchiqueteuse à alimentation automatique Detail K2 comprenant un démarreur électrique Kohler CH440 de 14 HP

  • Vitesses d'alimentation réglables

  • Pompe hydraulique de 10 ml/r avec force de 20 mpa

  • Arrêt de sécurité certifié CE

  • Poids : 289,4 kg (638 lb)

Numéro de modèle de l’article OPC505AE
Type dʼéquipement d’extérieur Déchiqueteuse/broyeur
Type de cordon S. O.
Quantité de piles requises 0
Profondeur une fois assemblé (po) 61,00 po
Longueur une fois assemblé (po) 91 po
Largeur une fois assemblé (po) 61,00 po
Poids une fois assemblé (lb) 638,0 lb
Nom de la marque du moteur Kohler
Liste d’accessoires Aucun accessoire inclus
Plateforme de Batteries Aucun
Certifications Aucune certification
Type d’alimentation de l’équipement dʼextérieur Essence
Profondeur du paquet (po) 62,99 po
Hauteur du paquet (po) 45,00 po
Poids du paquet (lb) 725,98 lb
Largeur du paquet (po) 32,99 po
Utilisations du produit Résidentiel
Cylindrée du moteur (cm3) 429,00 cm³
Garantie
  • 1 an, réparation
Renseignements supplémentaires
  • Consulter les guides de l’utilisateur et d'autres renseignements sur les articles

Télécharger

Commande en ligne
  • Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
  • Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
  • La livraison le jour même coûte 9,99 $ par commande.
  • Informations sur une commande en ligne
Retours
  • La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
  • Certains articles ne sont pas remboursables ni échangeables.
  • La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.

Comparer des articles semblables

Only Show Differences
Ratings
Type dʼéquipement d’extérieurDéchiqueteuse/broyeurDéchiqueteuse/broyeurDéchiqueteuse/broyeurDéchiqueteuse/broyeurDéchiqueteuse/broyeur
Type de cordonS. O.S. O.S. O.S. O.S. O.
Quantité de piles requises00000

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
1 commentaires avec 5 étoiles.
1 commentaires avec 4 étoiles.
1 commentaires avec 3 étoiles.
0 commentaires avec 2 étoiles.
0 commentaire avec 1 étoile.

Note générale

4.0
2 commentateurs sur 2 (100%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

    Filtrer les avis

    • précision
    • instructions
    • protection
    • réactivité
    • sécurité
    • la satisfaction
    • installation
    • entretien
    1 to 3 sur 3 commentaire
    1 – 3 sur 3 commentaire

    Great idea. The feed drum needs some more thought put in to it. If limb

    il y a un an
    This item was purchased over a year ago and has been un used for 90% of its time with a ground maintenance. The machine jams on 1 inch and 2 inch limbs. The chipper worked well on cider limbs.
    Traduire avec Google

    Affiché initialement sur Detail K2

    Réponse de Detail K2 :
    il y a 10 mois
    Customer Service
    Thank you for your feedback! We apologize for the negative experience you have had. Do not hesitate to contact us at support@detailk2.com so we can get it resolved for you! Thank you for choosing DK2! Farzad DK2 Customer Support

    Solid machine

    il y a un an
    Surpasses expectations, gave it 4 out of 5*. Would have given 5 * but the hydraulic system really needs a oil cooler, had to let it cool off after 40 minutes of use.
    Traduire avec Google

    Oui, Je recommande ce produit.

    Affiché initialement sur Detail K2

    Réponse de Detail K2 :
    il y a un an
    Customer Service
    Thank you for your feedback! We are glad to hear that you are enjoying the product and performance that comes with a DK2 product. If you have any questions, do not hesitate to contact us at support@detailk2.com or call us at 1(888) 277-6960 between the hours 8:00am-4:30pm EST. Thank you for choosing DK2! Farzad DK2 Customer Support

    Excellent chipper

    il y a 3 ans
    We have only used the chipper for a few hours but, so far, are very impressed with it. It has made quick work of several of the many piles of brush we have accumulated cleaning up after Ontario's derecho storm of last May. It is a large, heavy machine and keep that in mind when you go to pick it up - it was almost too much for our utility trailer to carry. The only negative we have found is the manual, and I hesitate to even call it that. There is a LOT of missing information needed to get the chipper ready to run. For instance, no mention is made of hydraulic fluid - what type is needed nor how much to add. Looking over the machine, we noticed three grease nipples. Again, these are not mentioned but we added grease and will put them on our maintenance task list. Connecting the battery is also not listed in the assembly instructions, nor is any mention of the kill switch atop the hopper - if this is not in the correct orientation, the chipper will not start (we discovered this after much cranking of an engine that would not fire up). Searching on goggle located a manual with a little more information, but all this, and more, should be in the provided manual. Once you get past these issues, the chipper starts easily, works great, and we are very pleased with it. Customer service is excellent. I contacted them with several questions and received quick, accurate, and helpful responses. One thing to note is that on the Detail K2 website, it says that this chipper comes with "lockout keys, safety glasses, ear protection, work gloves, an oil bottle and assembly tools". While there are two ignition keys included, if this is what they mean by “lockout keys”, none of the other items were to be found. An email to Customer Service, and they are shipping us the missing items.
    Traduire avec Google

    Oui, Je recommande ce produit.

    Utile?
    Réponse de Detail K2 Team :
    il y a 3 ans
    Detail K2 Team
    Thank you for your feedback!

    We are glad to hear that you are enjoying the product and performance that comes with a DK2 product. Our customer service team can provide the answers to your technical support questions and more, so do not hesitate to reach out to us if you may be unsure.

    Please contact support@detailk2.com or call us at 1(888) 277-6960 between the hours 8:00am-4:30pm EST for future assistance.

    Thank you for choosing DK2!

    Farzad
    DK2 Customer Support detailk2

    Questions

    1 - 6 sur 6 questions

    Q : Which type of oil i need for hydraulic

    il y a un an
    Traduire avec Google

    Publication initiale sur detailk2-ca.com

    1 Réponse
    • R : Thank you for your inquiry! AW32 hydraulic oil. If you have any questions, do not hesitate to contact us at support@detailk2.com or call us at 1(888) 277-6960 between the hours 8:00am-4:30pm EST. Thank you for choosing DK2! Farzad DK2 Customer Support

      il y a un an
      Traduire avec Google

    Q : What is the weight of the chipping rotor? And/or what is the plate thickness and diameter?

    il y a un an
    Traduire avec Google

    Publication initiale sur detailk2-ca.com

    1 Réponse
    • R : Thank you for your inquiry! It weighs about 80lbs. If you have any questions, do not hesitate to contact us at support@detailk2.com or call us at 1(888) 277-6960 between the hours 8:00am-4:30pm EST. Thank you for choosing DK2! Farzad DK2 Customer Support

      il y a un an
      Traduire avec Google

    Q : I am interested in your product 5-INCH AUTOMATIC FEED HYDRAULIC ELECTRIC START SHREDDER 14 HP 429 CC Do you have a distributor or representative to see your shredder in action I am from Quebec St George de Beauce

    il y a un an
    Traduire avec Google

    Publication initiale sur detailk2-ca.com

    1 Réponse
    • R : Thank you for your inquiry! You cannot see this in person at the moment. You can see our customers using it on YouTube. If you have any questions, do not hesitate to contact us at support@detailk2.com or call us at 1(888) 277-6960 between the hours 8:00am-4:30pm EST. Thank you for choosing DK2! Farzad DK2 Customer Support

      il y a un an
      Traduire avec Google

    Q : Bonjour où je pourrais voir la voir en action avant de de faire l'achat`DÉCHIQUETEUSE À DÉMARRAGE ÉLECTRIQUE HYDRAULIQUE À ALIMENTATION AUTOMATIQUE DE 5 POUCES 14 HP 429 CC

    il y a un an
    Traduire avec Google

    Publication initiale sur detailk2-ca.com

    1 Réponse
    • R : Thank you for your inquiry! You cannot see this in person at the moment. You can see our customers using it on YouTube. If you have any questions, do not hesitate to contact us at support@detailk2.com or call us at 1(888) 277-6960 between the hours 8:00am-4:30pm EST. Thank you for choosing DK2! Farzad DK2 Customer Support

      il y a un an
      Traduire avec Google

    Q : Where do these chippers ship from? How long to get one out here in BC at V0E 1W1, thanks

    il y a un an
    Traduire avec Google

    Publication initiale sur detailk2-ca.com

    1 Réponse
    • R : Thank you for your inquiry! We ship out of Canada and the US. It takes typically 5-7 business days. If you have any questions, do not hesitate to contact us at support@detailk2.com or call us at 1(888) 277-6960 between the hours 8:00am-4:30pm EST. Thank you for choosing DK2! Farzad DK2 Customer Support

      il y a un an
      Traduire avec Google

    Q : Will DK2 sell this unit with out the engine ??

    il y a un an
    Traduire avec Google

    Publication initiale sur detailk2-ca.com

    1 Réponse
    • R : Thank you for your inquiry! We do not sell this unit without the engine. If you have any questions, do not hesitate to contact us at support@detailk2.com or call us at 1(888) 277-6960 between the hours 8:00am-4:30pm EST. Thank you for choosing DK2! Farzad DK2 Customer Support

      il y a un an
      Traduire avec Google
    Haut