Bosch
Bosch Wood Cutting Band Saw Blades, 93.5 x 1/4-in, 6-TPI
#055-0803-0
$26.99
Buy Online :
- FREEAvailable
- Available
- Available
Pick up at Leduc, AB
Get it Today !3 In Stock
Pick up available 04:00 p.m., Dec 04
Quantity updated to 1
Also Find It in Store:Aisle 22
Only 3 left
at Leduc, AB
Add to Registry
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
Bosch Stationary Band Saw Blades help get the job done cleanly and quickly. They deliver durability and high performance. They are constructed with premium materials that resist heat buildup for longer life. The blades come in lengths to fit most common stationary band saw sizes. Bosch uses advanced laser-cutting technology to manufacture each blade to exacting specification for durability and high performance. These blades include an optimized tooth geometry for corresponding applications including metal, wood, scroll, fast and general-purpose cutting.
Specially set and sharpened for clean, fast cuts
Fits most bench top stationary band saws
Highest quality steel, inspected to assure maximum strength in the weld joint
Available in a variety of lengths
| Part Number | BS9312-6W |
|---|---|
| Advanced Features | No Advanced Features |
| Arbor Size | Not Applicable |
| Assembled Height (cm) | 30.16 cm |
| Assembled Height (ft) | 0.99 ft |
| Assembled Height (in) | 11.88 in |
| Assembled Length (cm) | 32.70 cm |
| Assembled Length (ft) | 1.07 ft |
| Assembled Length (in) | 12.88 in |
| Assembled Weight (kg) | 0.23 kg |
| Assembled Weight (lb) | 0.50 lb |
|---|---|
| Assembled Width (cm) | 0.61 cm |
| Assembled Width (in) | 0.24 in |
| Assembled Width (mm) | 6.10 mm |
| Blade Diameter (cm) | 1.00 cm |
| Blade Diameter (in) | 0.39 in |
| Blade Material | Steel |
| Blade Thickness (in) | 0.00 in |
| Blade Thickness (mm) | 0.10 mm |
| Machine Type Compatibility | Not Applicable |
| Number of Pieces | 1 |
| Number of Teeth | 1 |
| Primary Colour | Stainless Steel |
| Product Use(s) | Wood |
| Saw Blade Type | Scroll Saw Blade |
| Teeth Per Centimetre | 15.00 |
| Tooth Design | Segmented |
Warranty
- This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | Currently Viewing | ||||
| Ratings | |||||
| Advanced Features | No Advanced Features | No Advanced Features | No Advanced Features | No Advanced Features | |
| Arbor Size | Not Applicable | Not Applicable | Not Applicable | Not Applicable | |
| Assembled Height (cm) | 20.00 cm | 20.00 cm | 20.00 cm | 20.00 cm |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Review Highlights
Reviews
Filter Reviews
- cutting
- defect
- disappointing
- instructions
- purchase
- wood
Rating
Locale
1 to 5 of 11 Reviews
1 – 5 of 11 Reviews
Most Recent
5 out of 5 stars.
coupe bois
2 years ago
1 out of 5 stars.
Disappointed!
3 years ago
Did not cut well right out of the package and that's installing it using the "flutter" method.
Took forever to cut a small piece of cherry and, althought a bit better in much softer basswood , it left a very rough finish unlike any other 1/4" x 6TPI blade that I have ever used over the last 40 or so years! Very disappointed in this Bosch product!
No, I do not recommend this product.
Helpful?
Response from BoschTools:
3 years ago
BoschTools
"Thank you for providing us your feedback. All band saw blades, regardless of brand, need to be ""broken in"". When new, the teeth are simply ""too sharp"". Cutting at full rate will cause fracturing of the feather edges, which will lead to premature blade failure. Breaking in a band saw blade wears off this ultra sharp edge and allows the blade to retain its cutting edge longer. Each brand has their own preferred method of blade break in, however they all share the same principles:
1) Maintain recommended band saw speed,
2) Reduce Feed pressure to 1/2 normal rate,
3) Run at these settings for the first 50 square inches of material cut (150 square inches on mild and low carbon steel).
Note: If you are unsure what the normal feed pressure is, start light. Increase feed pressure until good curly chips start to form. After cutting the recommended area, slowly increase the feed pressure until you reach your desire cutting rate. Special consideration must be given while breaking in a band saw blade on nickel-based alloys (stainless steel, inconel, hastelloy, D2 tool steel, etc.). These alloys tend to harden very quickly; therefore, sufficient feed pressure must be applied during the break in period to remove some material. As a general rule, alloys sawed at lower speeds need more pressure during break in. Your comments will be forwarded to our product managers for future enhancement purposes. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from M-F 7a-7p CST. Thank you for your time."
1) Maintain recommended band saw speed,
2) Reduce Feed pressure to 1/2 normal rate,
3) Run at these settings for the first 50 square inches of material cut (150 square inches on mild and low carbon steel).
Note: If you are unsure what the normal feed pressure is, start light. Increase feed pressure until good curly chips start to form. After cutting the recommended area, slowly increase the feed pressure until you reach your desire cutting rate. Special consideration must be given while breaking in a band saw blade on nickel-based alloys (stainless steel, inconel, hastelloy, D2 tool steel, etc.). These alloys tend to harden very quickly; therefore, sufficient feed pressure must be applied during the break in period to remove some material. As a general rule, alloys sawed at lower speeds need more pressure during break in. Your comments will be forwarded to our product managers for future enhancement purposes. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from M-F 7a-7p CST. Thank you for your time."
1 out of 5 stars.
Short life
5 years ago
I have been cutting a lot of patterns in 1/2” plywood. I sometimes get less than an hour’s use on the Bosch 92 1/2 x 1/4” 6tpi blade. All the settings on my Jet bandsaw are correct according to the operators manual. I feel I am not crowding the blade. I will not purchase any more Bosch bandsaw blades.
No, I do not recommend this product.
Originally posted on boschtools.com
5 out of 5 stars.
Quality durable blade
7 years ago
If you are looking for a replacement blade for your bandsaw, this one is the one to choose. Nice clean cut, durable blade. It install pretty easily into my bandsaw.
Helpful?
4 out of 5 stars.
Bon article
7 years ago
On a utilisé cette lame de scie plusieurs elle est très résistante. Elle ne m’a pas déçue. Je m’attendais à ce qu’elle soit performante car j’ai confiance dans la marque.
Translate with GoogleHelpful?
1 – 5 of 11 Reviews
No questions have been asked about this product.
