This paragraph should be hidden.
Pick up available 09:00 a.m., Nov 19
Only 5 left
Quebec residents: For information on maintenance and repair click here.
Tackle tough jobs with the Mastercraft Power Air Drill, 3/8-in. This pneumatic drill is ideal for drilling through metal, making cuts with a hole saw, and doing cylinder honing. For added efficiency, this air powered drill has a keyless chuck for quick and easy bit changes. A forward/reverse switch allows for a quick change of direction while operating this compressed air drill. A screened inlet prevents dirt particles from entering the air intake, keeping the air impact drill clean. Rear exhaust directs exhaust air away from the work area, helping to reduce noise. A fully hardened planetary gearing gives this air drill greater water resistance and improved durability. The soft rubber grip provides comfort while using the tool. This product includes an air-powered drill, a 1/4” NPT plug, and a bottle of oil.
Mastercraft Power Air Drill is ideal for drilling through metal, making cuts with a hole saw, and doing cylinder honing
A fully hardened planetary gearing provides greater wear resistance and added durability
Lightweight aluminum housing provides superior strength and durability
Rear exhaust directs air away from the work area and reduces noise
CFM requirement: 3.8 at 90 PSI
A screened inlet prevents dirt particles from entering the air intake
The keyless chuck offers quick and easy bit changes
Load speed: 1800 RPM
Chuck size: 3/8” (10mm)
Air hose required: 3/8" (9.55mm)
A forward/reverse switch allows for quick operation
Includes a 1/4” NPT plug and a bottle of oil
Air inlet: 1/4"-18 NPT
Working pressure: 90 PSI
| Part Number | RP27101 |
|---|---|
| Accessories List | Oil |
| Advanced Features | Reversible |
| Air Inlet Size | 1/4" |
| Assembled Height (cm) | 18.00 cm |
| Assembled Height (ft) | 0.59 ft |
| Assembled Height (in) | 7.09 in |
| Assembled Length (cm) | 4.50 cm |
| Assembled Length (ft) | 0.15 ft |
| Assembled Length (in) | 1.77 in |
| Assembled Weight (kg) | 1.16 kg |
|---|---|
| Assembled Weight (lb) | 2.56 lb |
| Assembled Width (cm) | 15.50 cm |
| Assembled Width (ft) | 0.51 ft |
| Assembled Width (in) | 6.10 in |
| Assembled Width (mm) | 155.00 mm |
| Certifications | No Certifications |
| Chuck Material | Steel |
| Chuck Size (in) | 3/8" |
| Chuck Type | Keyless |
| Drive Type | Not Applicable |
| Horsepower (HP) | 2 HP |
| Maximum Impact Rate (bpm) | 0 bpm |
| Maximum Pressure (psi) | 100 lb/in² |
| Maximum Torque (nm) | 2 Nm |
| Noise Level (dB) | 95 dB |
| Package Depth (cm) | 21.20 cm |
| Package Depth (in) | 8.35 in |
| Package Height (cm) | 5.20 cm |
| Package Height (in) | 2.05 in |
| Package Weight (kg) | 1.50 kg |
| Package Weight (lb) | 3.31 lb |
| Package Width (cm) | 15.00 cm |
| Package Width (in) | 5.91 in |
| Primary Material | Aluminum |
| Product Model Number | RP27101 |
| Required Air Flow (ft³/min) | 4025.87 ft³/min |
| Required Air Flow (m³/min) | 114.00 m³/min |
| Suggested Air Hose Size | 3/8" |
| Tool Type | Drill |
Yes, I recommend this product.
Yes, I recommend this product.
